STX setup sharing thread (2020)

[strat61caster]

+40 17x9 should be good to over -4 camber, that's where I'm at, if I remove spacers I just try to be careful about not turning the wheel all the way.

[Breezio]

Originally Posted by Breadman

how do those fit up front? also did you get custom 6ul because the offset is +40? I only have -3.1* front and at full lock my tire BARELY touches the liner

Sorry, that was a typo. I just fixed it. I have the regular +40 version.

I do not get any rubbing up front so far. I had a tiny bit over big bumps in the rear intially, but I raised the rear ride height a tad and none since then.
Where does your tire touch the liner?

[Breadman]

Originally Posted by Breezio

Sorry, that was a typo. I just fixed it. I have the regular +40 version.

I do not get any rubbing up front so far. I had a tiny bit over big bumps in the rear intially, but I raised the rear ride height a tad and none since then.
Where does your tire touch the liner?

https://www.ft86club.com/forums/showthread.php?t=105622
if you look at the 2nd pic i just barely touched the liner like this guy. i dont touch at the top. i assume that is from when i hit a turn too hard and understeer and keep going like a dumbass. only on my drivers side too which is why im guessing it is from what i think

[Breezio]

Originally Posted by Breadman

https://www.ft86club.com/forums/showthread.php?t=105622
if you look at the 2nd pic i just barely touched the liner like this guy. i dont touch at the top. i assume that is from when i hit a turn too hard and understeer and keep going like a dumbass. only on my drivers side too which is why im guessing it is from what i think

Could be. I don't have enough experience to help. New to this platform. I am also running increased caster, which could help with that forward clearance? I really don't know though.

[steverife]

Alright.

It is time to put a lightweight battery in the car (after I raise the car and align it again). How long are people letting their cars sit between drives without issue/attention?

[Breadman]

Originally Posted by steverife

Alright.

It is time to put a lightweight battery in the car (after I raise the car and align it again). How long are people letting their cars sit between drives without issue/attention?

ive done 5 days with mine and had no issues. when going away for more than a week i disconnect it

[strat61caster]

Over a week on Odyssey PC680 without issue (shutdown wfh life), coming up on three years old for that battery this fall. Not the lightest but it hasn't skipped a beat and it doesn't break the budget.

[sifl]

The Antigravity ATX-12-HD in my car has gone two weeks without any issues. It's also only 3 lbs.

Sent from my SM-G973U using Tapatalk

[M0nk3y]

I have Antigravity ATX-20 RS. I've had the car sit for a week + without issues.

I did kill it over the winter because I forgot to put it on a tender, and the restart tech on it is absolutely amazing.

Talk to Bart.

[Breadman]

mines the shori lfx36l3-bs1

[Breezio]

Originally Posted by Breadman

https://www.ft86club.com/forums/showthread.php?t=105622
if you look at the 2nd pic i just barely touched the liner like this guy. i dont touch at the top. i assume that is from when i hit a turn too hard and understeer and keep going like a dumbass. only on my drivers side too which is why im guessing it is from what i think

Looked under my car after driving with the race tires for a few days. I do have rubbing on the inside, on both sides. Appears to be caused from the steering being turned all the way.
No more full lock turns from now on...

[Breadman]

Originally Posted by Breezio

Looked under my car after driving with the race tires for a few days. I do have rubbing on the inside, on both sides. Appears to be caused from the steering being turned all the way.
No more full lock turns from now on...

yep thats what happens when you run 255 fatties. i originally thought it was because i bent something on my driver side going off track but it is on both sides. i probably did bend something but after the alignment they are even

[Breadman]

i just rubbed some more yesterday with my REs. I guess the way to fix this besides dont go near full lock is get a wheel with more offset?




edit:im dumb i want less offset and i have 3mm spacers ill toss on to see if they hit full lock

[bmacfrs]

Some of these may do it.
https://www.amazon.com/dp/B01M6238ZD..._HXicFbGYZSW40


Sent from my SM-G960U using Tapatalk