follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Forced Induction

Forced Induction Turbo, Supercharger, Methanol, Nitrous


User Tag List

Reply
 
Thread Tools Search this Thread
Old 04-22-2021, 10:36 AM   #1
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,883
Thanks: 5,668
Thanked 5,804 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Engine Blew!

Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
The Following User Says Thank You to Irace86.2.0 For This Useful Post:
Dadhawk (04-23-2021)
Old 04-22-2021, 10:41 AM   #2
spcmafia
Senior Member
 
spcmafia's Avatar
 
Join Date: Jun 2020
Drives: 2018 Subaru BRZ
Location: Stonington, Connecticut
Posts: 3,281
Thanks: 1,514
Thanked 4,141 Times in 1,986 Posts
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Irace86.2.0 View Post
Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.

Damn, I'm sorry man. Best of luck.
__________________
“God gave me an okay mind, but a really good ass, which can feel everything in a car.” Nikki Lauda
spcmafia is offline   Reply With Quote
Old 04-22-2021, 10:46 AM   #3
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,883
Thanks: 5,668
Thanked 5,804 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Isn’t this stuff suppose to be inside the engine?
Attached Images
  
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
Old 04-22-2021, 11:31 AM   #4
FR-S2GT86
Master Collaborator
 
FR-S2GT86's Avatar
 
Join Date: Nov 2019
Drives: Was '15 FR-S, 6MT, Now '15 GT86
Location: West Virginia, USA
Posts: 1,395
Thanks: 208
Thanked 985 Times in 597 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Ouch! I know you had a lot into that build. Sorry man. But at least I know now not to move up to the 75mm pulley.

You could always keep the twin and wait until there's a crate electric motor available.
__________________
Quote:
Originally Posted by Mr.ac View Post
My pubes are shaped like the number 86. There for I’m car. Derp
Count to muffens and call again.
I’m 40. So....... say hi to your sisters or daughters.

Last edited by FR-S2GT86; 04-22-2021 at 12:53 PM.
FR-S2GT86 is offline   Reply With Quote
The Following 4 Users Say Thank You to FR-S2GT86 For This Useful Post:
brandonblt2 (05-17-2021), EAGLE5 (04-23-2021), Irace86.2.0 (04-22-2021), p1l0t (04-22-2021)
Old 04-22-2021, 11:55 AM   #5
p1l0t
Senior Member
 
p1l0t's Avatar
 
Join Date: Jan 2016
Drives: 2016 Subaru BRZ Hyperblue
Location: West Hartford, CT
Posts: 8,416
Thanks: 22,575
Thanked 9,371 Times in 4,813 Posts
Mentioned: 58 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by FR-S2GT86 View Post
Ouch! I know you had a lot into that build. Sorry man. But at least I know now not to move up to the 75mm pulley.

You could always keep the twin and wait until there's an crate electric motor available.
AWD twin w00t

Sent from my SM-G975U using Tapatalk
p1l0t is offline   Reply With Quote
The Following User Says Thank You to p1l0t For This Useful Post:
Irace86.2.0 (04-22-2021)
Old 04-22-2021, 12:05 PM   #6
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,145
Thanks: 18,142
Thanked 16,304 Times in 7,368 Posts
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Garage
Let go pretty hard to do that much damage. Did it make any noise before it went?
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
NoHaveMSG is offline   Reply With Quote
The Following User Says Thank You to NoHaveMSG For This Useful Post:
Irace86.2.0 (04-22-2021)
Old 04-22-2021, 12:09 PM   #7
wbradley
Sarcastic SOB
 
wbradley's Avatar
 
Join Date: May 2012
Drives: '13 FR-S M6, '23 Volvo V60 CC
Location: Thornhill Ontario
Posts: 4,614
Thanks: 1,341
Thanked 2,844 Times in 1,635 Posts
Mentioned: 32 Post(s)
Tagged: 3 Thread(s)
Garage
It would be so much better if there could be a happy ending to this story. Good luck.
__________________
5:AD kit, HKS V1+ S/C, ECUtek dyno'd, Ohlins MP20, Magnaflow cb, Revworks UEL, Topspeed overpipe, Pinnacle Ceramic tint, VG shark fin, HID's, yellow DRL's, full LEDs, red floor lights, Homelink mirror, trunk lid liner, Perrin LWCP, Valenti smoked, Flossy Grip Tape Shorty, GT86 plaque, lighted vanity mirror, Michelin PSS, Project mU +800, DOT4 fluid, 720 Form GTF1 17x8&9, stitched leather bits, EZ valve.
wbradley is offline   Reply With Quote
The Following User Says Thank You to wbradley For This Useful Post:
Irace86.2.0 (04-22-2021)
Old 04-22-2021, 12:12 PM   #8
Lonewolf
Senior Member
 
Lonewolf's Avatar
 
Join Date: Dec 2011
Drives: Moped
Location: CA
Posts: 4,298
Thanks: 4,897
Thanked 2,128 Times in 1,193 Posts
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Irace86.2.0 View Post
Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.

I'm sorry to hear it...your build was amazing
Lonewolf is offline   Reply With Quote
The Following User Says Thank You to Lonewolf For This Useful Post:
Irace86.2.0 (04-22-2021)
Old 04-22-2021, 12:26 PM   #9
DarkPira7e
Rust bucket enthusiast
 
DarkPira7e's Avatar
 
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 3,932
Thanks: 3,198
Thanked 4,095 Times in 2,045 Posts
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
What a shame glad the failure didn't also incur a safety consequence
__________________
Turbo FR-S Build - Build Thread
JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block
DarkPira7e is offline   Reply With Quote
The Following 2 Users Say Thank You to DarkPira7e For This Useful Post:
Irace86.2.0 (04-22-2021), NoHaveMSG (04-22-2021)
Old 04-22-2021, 12:30 PM   #10
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,145
Thanks: 18,142
Thanked 16,304 Times in 7,368 Posts
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by DarkPira7e View Post
What a shame glad the failure didn't also incur a safety consequence
That is such a fear of mine. The way these engines let go makes me afraid of oil spray getting on the exhaust, there was one instance of this after a J02 recall failure that led to an engine bay fire.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
NoHaveMSG is offline   Reply With Quote
Old 04-22-2021, 12:39 PM   #11
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,883
Thanks: 5,668
Thanked 5,804 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by NoHaveMSG View Post
Let go pretty hard to do that much damage. Did it make any noise before it went?
It made a bang when I hit the bump and then grinding like a spun rod and then clank, clank, clank as shit went through the block. It was pretty epic. Surprisingly, I had this sheepish look on my face like, “hehe, I pushed it too hard.” I’ll rip it apart tomorrow and see what is going on.
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
The Following 5 Users Say Thank You to Irace86.2.0 For This Useful Post:
JesseG (04-22-2021), JonAvalon (04-30-2021), NoHaveMSG (04-22-2021), p1l0t (04-22-2021), spike021 (04-23-2021)
Old 04-22-2021, 12:43 PM   #12
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,883
Thanks: 5,668
Thanked 5,804 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by NoHaveMSG View Post
That is such a fear of mine. The way these engines let go makes me afraid of oil spray getting on the exhaust, there was one instance of this after a J02 recall failure that led to an engine bay fire.
There was steam from the coolant, but no loss of traction or anything crazy.

It is funny because I was probably a month or two away from converting it back to a CARB/stock condition for smog and then I was going to leave it that way for nursing school. Oh well, but I have plenty of cash. I will just need to figure out what I want to do. I might sell the supercharger or not. I might part stuff or not. I might sell it all as is or not. I might do a swap and have it NA or not. I’ll have to assess the damage and think about it.
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
The Following User Says Thank You to Irace86.2.0 For This Useful Post:
JesseG (04-22-2021)
Old 04-22-2021, 12:45 PM   #13
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,883
Thanks: 5,668
Thanked 5,804 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
More carnage.
Attached Images
 
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
The Following User Says Thank You to Irace86.2.0 For This Useful Post:
p1l0t (04-22-2021)
Old 04-22-2021, 12:59 PM   #14
FR-S2GT86
Master Collaborator
 
FR-S2GT86's Avatar
 
Join Date: Nov 2019
Drives: Was '15 FR-S, 6MT, Now '15 GT86
Location: West Virginia, USA
Posts: 1,395
Thanks: 208
Thanked 985 Times in 597 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Irace86.2.0 View Post
More carnage.
I think you should change your user name to ICan'tRace86.2.0
__________________
Quote:
Originally Posted by Mr.ac View Post
My pubes are shaped like the number 86. There for I’m car. Derp
Count to muffens and call again.
I’m 40. So....... say hi to your sisters or daughters.
FR-S2GT86 is offline   Reply With Quote
The Following 12 Users Say Thank You to FR-S2GT86 For This Useful Post:
Ash_89 (05-02-2021), B T (04-23-2021), brandonblt2 (05-17-2021), EAGLE5 (04-23-2021), Irace86.2.0 (04-22-2021), jmimac351 (05-07-2021), ninjan00dles (04-23-2021), p1l0t (04-22-2021), soundman98 (04-23-2021), spike021 (04-23-2021), Spuds (04-23-2021), x808drifter (04-23-2021)
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dustin's UltraMarine FR-S (Engine Blew - LS3 Time) DustinS Member's Car Journals 800 04-13-2024 09:23 AM
Engine Blew, any shop recommendations? tian105 Southern California 11 08-16-2020 11:35 PM
Engine blew on 4psi? Causes? soccerk18 Software Tuning 26 08-10-2019 11:18 AM
Help! New Car Engine Blew Up. What are my rights? Obsidiank Scion FR-S / Toyota 86 GT86 General Forum 53 12-11-2014 11:43 AM
So my engine blew up.... alliedcam1 Engine, Exhaust, Transmission 57 12-28-2013 02:50 PM


All times are GMT -4. The time now is 02:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.