Delicious Tuning - Q&A EcuTeK ProECU Tuning and Maps

[DeliciousTuning]

Originally Posted by protpibe

If I have the delicious 11psi Map Sensor and want to get a 15psi tune, which sensor should I get?

OMNI 3 BAR is something we have a scaling option preset for at the moment that will work

Sincerely,


Delicious Tuning

[Ryan86]

Originally Posted by xjohnx

Can't make out the numbers, what did you hit? What a difference the intake pipe makes to the sound of the SC, very nice.

[TrogDor the Burninator]

Originally Posted by sales@delicioustuning.com

Hey Jon,

First off responded to your pm

Second, we haven't quite had a chance to test this one yet, but the initial dyno results did indeed look promising if everything was tested as stated, especially considering the cat being retained. I would certainly be interested in trying to validate the numbers, as if they're true it would appear to be quite the well designed unit. I do imagine, however, that our tune would be a bit different considering the fact that it is a catted UEL unit, which I do not believe we have had the pleasure of dealing with as of yet for this car. I'm actually not sure if we've done a catted aftermarket header at all yet on this car, all that I recall have been catless. Either way, we'd like to see just as much as you what can be done with it

Sincerely,

Zach
Delicious Tuning

Didn't get the PM!

[nlowell]

Bill took care of my car this week, giving the Phantom ESC a little tune magic on E60 (on the way to E85). Here's the post:

http://www.ft86club.com/forums/showp...postcount=6599

[Calum]

Originally Posted by xjohnx

Sweet baby Jesus that's awesome.

Setup and fuel info please?

[xjohnx]

Originally Posted by Ryan86

Can't make out the numbers, what did you hit? What a difference the intake pipe makes to the sound of the SC, very nice.

Originally Posted by Calum

Sweet baby Jesus that's awesome.

Setup and fuel info please?

Motor setup:

• Innovate SC (with intercooler)
• 70MM Pulley
• FlexFuel (E71 or so in this video)
• Nameless Performance Header/Overpipe/Downpipe/Axleback
• Perrin 3" CAI
• Perrin Oil Cooler
• Stock Injectors, Stock MAP/MAF sensor.
• ECUTek Tuned by @DeliciousTuning (8.59)

[protpibe]

Originally Posted by sales@delicioustuning.com

OMNI 3 BAR is something we have a scaling option preset for at the moment that will work

Sincerely,

Zach
Delicious Tuning

Ok!

Just ordered an Omni 3 Bar MAP sensor, DW450cc injectors, and the Full Blown fuel pump setup.

I'll PM/email you or Bill when it arrives to get my tune adjusted

Thanks

[acro]

how do you flash back to the stock rom?

[AZFA20]

Originally Posted by acro

how do you flash back to the stock rom?

Go to your C:

Go to your EcuTek File

Go to your ProECURom Files

Go to Subaru

Go to BRZ

Choose the ROM associated to your region (Can't tell you which to choose since your profile says "Northern Hemisphere" haha, sort of encompasses a lot of countries

[acro]

Lol. Ok thanks

[kombatlion]

Originally Posted by sales@delicioustuning.com

OMNI 3 BAR is something we have a scaling option preset for at the moment that will work

Sincerely,

Zach
Delicious Tuning

Have you done any Turbo Kits Methanol Tunes?

I have a Custom shop Turbo, with Snow Methanol kit producing 358whp at 12.96 psi

and without meth I have 278whp on 93

Dont know if I can get more, so I am asking to know if you have done any and what are the results.

[SkAsphalt]

Originally Posted by protpibe

If I have the delicious 11psi Map Sensor and want to get a 15psi tune, which sensor should I get?

you monster

[protpibe]

Originally Posted by kombatlion

Have you done any Turbo Kits Methanol Tunes?

I have a Custom shop Turbo, with Snow Methanol kit producing 358whp at 12.96 psi

and without meth I have 278whp on 93

Dont know if I can get more, so I am asking to know if you have done any and what are the results.

I made just shy of 270 whp at 10psi

It's hard to compare apples to apples on different dynos

[kombatlion]

Originally Posted by protpibe

I made just shy of 270 whp at 10psi

It's hard to compare apples to apples on different dynos

Thanks, I only want it to know an estimate, just to compare my gains.