Random Thoughts - Part Deux [NO POLITICS] - Page 3176 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Spuds · 05-20-2018, 03:02 PM

Quote:

Originally Posted by Tcoat

True but they should not be used unless inspected and approved by a certified nut inspector.

Ah, your right. You can only trust certified inspectors. All other manner of experts have it out for you, and want to steal your good nuts and leave you with bad nuts. And I'm clearly a nut expert, so ashamed. At least I know more about storing nuts for the winter than the goddamned squirrels!

humfrz · 05-20-2018, 03:12 PM

Quote:

Originally Posted by nikitopo

I saw your file before and I thought to help you. I didn't bring the discussion here. You did and @humfrz, but it looks you are a very rude person with no manners and you don't deserve any help. Too bad I replied.

Now, hold up fer just a gall darn minute .......

Let's review to see who brought this debate over to this thread.

@Tcoat (post #44409)

"If you build it just make sure you use a light weight pulley, narrow tires and do a ghost cam tune or it just won't be cool."

@Spuds (post #44413)

"In other news, I'm almost done with the inertia calculator. Just trying to wrap my head around what happens if the before/after includes ratio swaps. I should have something for Ultra to drool over later tonight."

So, did ol humfrz really fall off the turnip truck ...... and if so, where ..??

I may be old ....... but, I'm not ...... not ...... did I take my meds this morning ...... be right back .......

Tcoat · 05-20-2018, 03:16 PM

Quote:

Originally Posted by humfrz

Now, hold up fer just a gall darn minute .......

Let's review to see who brought this debate over to this thread.

@Tcoat (post #44409)

"If you build it just make sure you use a light weight pulley, narrow tires and do a ghost cam tune or it just won't be cool."

@Spuds (post #44413)

"In other news, I'm almost done with the inertia calculator. Just trying to wrap my head around what happens if the before/after includes ratio swaps. I should have something for Ultra to drool over later tonight."

So, did ol humfrz really fall off the turnip truck ...... and if so, where ..??

I may be old ....... but, I'm not ...... not ...... did I take my meds this morning ...... be right back .......

My statement has nothing to do with the debate. It is just the shopping list of current best mods.

Spuds · 05-20-2018, 03:35 PM

Quote:

Originally Posted by humfrz

Now, hold up fer just a gall darn minute .......

Let's review to see who brought this debate over to this thread.

@Tcoat (post #44409)

"If you build it just make sure you use a light weight pulley, narrow tires and do a ghost cam tune or it just won't be cool."

@Spuds (post #44413)

"In other news, I'm almost done with the inertia calculator. Just trying to wrap my head around what happens if the before/after includes ratio swaps. I should have something for Ultra to drool over later tonight."

So, did ol humfrz really fall off the turnip truck ...... and if so, where ..??

I may be old ....... but, I'm not ...... not ...... did I take my meds this morning ...... be right back .......

The inertia (and now gearing) calculator has nothing to do with pullies. A review of the last few pages would show that I specifically left pullies out because I didn't feel it was important enough to go collect the necessary information to input stock measurements. Meaning I'm considering them part of the engine, not a separate component.

Enough about pullies.

What's y'all favorite nut? Other than Humfrz of course

.

Mines Walnut.

humfrz · 05-20-2018, 03:38 PM

OK, OK, ....... my bad ........

humfrz

Sapphireho · 05-20-2018, 03:47 PM

Quote:

Originally Posted by Spuds

The inertia (and now gearing) calculator has nothing to do with pullies. A review of the last few pages would show that I specifically left pullies out because I didn't feel it was important enough to go collect the necessary information to input stock measurements. Meaning I'm considering them part of the engine, not a separate component.

Enough about pullies.

What's y'all favorite nut? Other than Humfrz of course

.

Mines Walnut.

Pistachio.

humfrz · 05-20-2018, 03:47 PM

Quote:

Originally Posted by Sapphireho

Too much beer and poker last night. I came in 3rd in the hold'em tournament, so not too bad.

Depends on how many people were playing ......

humfrz

Sapphireho · 05-20-2018, 06:08 PM

Quote:

Originally Posted by humfrz

Depends on how many people were playing ......

humfrz

8

Sapphireho · 05-20-2018, 07:00 PM

Wife and I did the "S-ho loop" today in the tiny car. 17- Bear Creek, back down 9. Beautiful nice cool day.

spike021 · 05-20-2018, 11:10 PM

Quote:

Originally Posted by Sapphireho

Wife and I did the "S-ho loop" today in the tiny car. 17- Bear Creek, back down 9. Beautiful nice cool day.

Still need to try this.

But I think fun drives are on hold till I get this issue resolved

.

Going to try and luck out going to Mann Engineering on the way to work right when they open tomorrow to see if they'd mind giving my car a quick look on the lift.

Sapphireho · 05-20-2018, 11:13 PM

Quote:

Originally Posted by spike021

Still need to try this.

But I think fun drives are on hold till I get this issue resolved

.

Going to try and luck out going to Mann Engineering on the way to work right when they open tomorrow to see if they'd mind giving my car a quick look on the lift.

Gary will take care of you.

krayzie · 05-21-2018, 07:31 AM

Quote:

Originally Posted by Sapphireho

Pistachio.

#19

Nevermore · 05-21-2018, 08:55 AM

That diagram makes me realize Willie goes through a lot of hell for what wouldn't amount to much of a meal. That road runner doesn't have any meat on his bones.

Tcoat · 05-21-2018, 10:02 AM

Well last day of a 4 day long weekend. Looking forward to going back to work tomorrow. Need the rest.

05-21-2018, 10:02 AM	#44464
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,845 Thanks: 61,656 Thanked 108,283 Times in 46,456 Posts Mentioned: 2495 Post(s) Tagged: 50 Thread(s)	Well last day of a 4 day long weekend. Looking forward to going back to work tomorrow. Need the rest. __________________ Racecar spelled backwards is Racecar, because Racecar.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Language Rant Part Deux	MuseChaser	Off-Topic Lounge [WARNING: NO POLITICS]	43	04-23-2017 07:55 PM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 10:00 AM
Random Rubber Part	OoLong	BRZ First-Gen (2012+) -- General Topics	8	01-28-2014 10:31 AM
Crew Carshow : Part Deux 9/7/13	saiyajinimports	Great Lakes	0	08-17-2013 05:18 AM

05-20-2018, 03:38 PM	#44455
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 29,870 Thanks: 28,792 Thanked 31,819 Times in 16,427 Posts Mentioned: 708 Post(s) Tagged: 2 Thread(s)	OK, OK, ....... my bad ........ humfrz

05-20-2018, 07:00 PM	#44459
Sapphireho ¯\_(ツ)_/¯ Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 13,196 Thanks: 5,451 Thanked 18,244 Times in 8,612 Posts Mentioned: 155 Post(s) Tagged: 0 Thread(s)	Wife and I did the "S-ho loop" today in the tiny car. 17- Bear Creek, back down 9. Beautiful nice cool day.

05-21-2018, 08:55 AM	#44463
Nevermore Wayward Member Join Date: May 2012 Drives: Hot Lava 86 Location: Bust of Pallas Posts: 3,336 Thanks: 1,669 Thanked 2,312 Times in 1,386 Posts Mentioned: 50 Post(s) Tagged: 3 Thread(s)	That diagram makes me realize Willie goes through a lot of hell for what wouldn't amount to much of a meal. That road runner doesn't have any meat on his bones.

User Name		Remember Me?
Password