follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Forced Induction

Forced Induction Turbo, Supercharger, Methanol, Nitrous


User Tag List
BT, dpfarr

Reply
 
Thread Tools Search this Thread
Old 07-20-2024, 04:28 PM   #4971
dpfarr
Senior Member
 
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 416
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
It’s been several years since I installed the blower. To remove it, in order to get at the starter to do my clutch; what’s the easiest way to get it out of the way? I’m going to go pull up the manual, but if you’re faster than me in this heat. Please don’t hesitate to help a dummy.

I had to go inside because of the heat. Didn’t drain the coolant from the blower. Can the unit be moved forward to access the starter or might as well drain and just remove the whole thing?

Last edited by dpfarr; 07-20-2024 at 08:03 PM.
dpfarr is offline   Reply With Quote
Old 07-20-2024, 11:16 PM   #4972
bigB
Member
 
Join Date: Aug 2015
Drives: 2014 ultramarine FR-S monogram
Location: 626
Posts: 15
Thanks: 1
Thanked 12 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
When I did my clutch earlier this year, I slapped together an apparatus similar to something that someone here showed that they bought from harbor freight, and used it with some straps to lift up the sc without disconnecting everything. But I had a hell of a time with the two electrical connectors at the top of the bell housing, trying to reach back there underneath the suspended sc. When I put it back together, I thought I got those connectors back together but no, I started getting neutral switch codes and my back up lights didn’t work. I ended up taking the sc off to get to those connectors. So I would recommend just taking it off.

With this issue and the two bypass actuator problems I have had, i am getting pretty good at taking that thing off.

Last edited by bigB; 07-20-2024 at 11:17 PM. Reason: Added a missing word
bigB is offline   Reply With Quote
The Following User Says Thank You to bigB For This Useful Post:
B T (07-22-2024)
Old 07-20-2024, 11:19 PM   #4973
bigB
Member
 
Join Date: Aug 2015
Drives: 2014 ultramarine FR-S monogram
Location: 626
Posts: 15
Thanks: 1
Thanked 12 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Also, I didn’t drain the coolant, just disconnected the lines and wedged them facing up and out of the way. I didn’t loose too much coolant, and just topped it up after it was back together.
bigB is offline   Reply With Quote
Old 07-21-2024, 01:39 AM   #4974
dpfarr
Senior Member
 
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 416
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
I appreciate it.

Man I hate when working on cars doesn’t work well. Like figuring out the lower coolant hose clamp. I don’t even have a memory of putting that on. Must’ve put it on before I bolted the sc down?

I was putting my car up last weekend to start but the jack stands were way too fucking high to use (wishful thinking). I noticed a spot of leakage in my garage, looks like it came from my diff. Hoping the drain is not 100% tight or something. Otherwise…
dpfarr is offline   Reply With Quote
Old 07-22-2024, 12:00 PM   #4975
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 520
Thanks: 202
Thanked 210 Times in 145 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by bigB View Post
When I did my clutch earlier this year, I slapped together an apparatus similar to something that someone here showed that they bought from harbor freight, and used it with some straps to lift up the sc without disconnecting everything.
This is the same way I do it. only really had to lift the supercharger because of the stupid clutch cylinder placement. Did everything else from under the car, including reach around for the electrical connectors.
__________________
B T is offline   Reply With Quote
Old 07-31-2024, 05:37 PM   #4976
SOCON
Member
 
SOCON's Avatar
 
Join Date: May 2018
Drives: 2017 WR Blue PP
Location: Hahira Georgia
Posts: 54
Thanks: 23
Thanked 37 Times in 25 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
https://www.ft86club.com/forums/show...=136552&page=2 I have used this rig far more times than I ever thought would happen. Well worth the money.
SOCON is offline   Reply With Quote
The Following User Says Thank You to SOCON For This Useful Post:
brandonblt2 (09-17-2024)
Old 08-01-2024, 03:43 AM   #4977
dpfarr
Senior Member
 
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 416
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
I guess the plus side was looking at my bypass actuator. What’s the test to tell if it still has appropriate vacuum? Or there’s a mount pattern of old vs new?

Additionally, the coolant tubing has some rust. I had been running Subaru coolant in it the last couple years. I want to assume that’s not the usual? I’m going to clean it up before I put it back on but want to be extra proactive that this doesn’t continue to oxidize and cause worse issues.
dpfarr is offline   Reply With Quote
Old 08-01-2024, 03:43 AM   #4978
dpfarr
Senior Member
 
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 416
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
I guess the plus side was looking at my bypass actuator. What’s the test to tell if it still has appropriate vacuum? Or there’s a mount pattern of old vs new?

Additionally, the coolant tubing has some rust. I had been running Subaru coolant in it the last couple years. I want to assume that’s not the usual? I’m going to clean it up before I put it back on but want to be extra proactive that this doesn’t continue to oxidize and cause worse issues.
dpfarr is offline   Reply With Quote
Old 09-18-2024, 11:33 PM   #4979
Brewster
Member
 
Brewster's Avatar
 
Join Date: Feb 2021
Drives: 13 FRS AT, Edelbrock SC, Tomei EL
Location: Vancouver, B.C.
Posts: 54
Thanks: 39
Thanked 76 Times in 30 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by CSG Mike View Post
I love this.

What about water/meth injection?

Is anyone using water/methanol injection with the Edelbrock supercharger ?

Would it provide the equivalent Knock protection that 98 octane race fuel does ?
__________________
The best thing about the future is that it comes one day (and curve) at a time.
Brewster is offline   Reply With Quote
Old 09-19-2024, 10:37 AM   #4980
Muskoka800
Senior Member
 
Join Date: Jul 2018
Drives: 2016 Scion FRS Release Series 2#439
Location: Chatham, Ontario, Canada
Posts: 728
Thanks: 4
Thanked 158 Times in 131 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Brewster View Post
Is anyone using water/methanol injection with the Edelbrock supercharger ?

Would it provide the equivalent Knock protection that 98 octane race fuel does ?
I have two available tunes, 94 and 91. I run 94 normally but sometimes when up north it isn’t available so I have the 91 tune back-up. I can toggle back and forth using the cruise control stalk. Zach at CSG does my Ecotek tuning.
No knocking ever whether on street or lapping. Zach will someday adjust my tunes to accommodate a 3” pulley upgrade and larger injectors.
__________________
Edelbrock S/C with CSG 94 & 91 maps
TRD Short Shifter, CTS/EvoX Brakes
Ohlin’s R&T Dampers, Hotchkis F/R Bars, Blox LCA & Toe Arms
235F/245R Conti ECS on TRD/Enkei wheels (street),
245/40 sq. ECF on 17x8 720Form GTF2 wheels (track)
Muskoka800 is offline   Reply With Quote
Old 09-19-2024, 11:15 AM   #4981
Brewster
Member
 
Brewster's Avatar
 
Join Date: Feb 2021
Drives: 13 FRS AT, Edelbrock SC, Tomei EL
Location: Vancouver, B.C.
Posts: 54
Thanks: 39
Thanked 76 Times in 30 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Muskoka800 View Post
I have two available tunes, 94 and 91. I run 94 normally but sometimes when up north it isn’t available so I have the 91 tune back-up. I can toggle back and forth using the cruise control stalk. Zach at CSG does my Ecotek tuning.
No knocking ever whether on street or lapping. Zach will someday adjust my tunes to accommodate a 3” pulley upgrade and larger injectors.

Having multiple octane tunes selectable on the fly is a convenient feature of Ecuteck. I too have been tuned by Zach, for 91,94 and 98 octane.

My consideration of running water/methanol injection, as suggested by CSG Mike, would be an alternative to using Race Fuel. It would reduce the cost and transportation issues of Race Fuel.
Also, my good wife considers travelling with 2-3 5 gallons pails of Race Fuel in the trunk hazardous and prefers not to join me on those drives. Running water/meth injection would eliminate that issue and she could join me on more trips..... well, maybe I should re-think this topic

Popular consensus seems to indicate only using a smaller pulley with a "built" engine.
__________________
The best thing about the future is that it comes one day (and curve) at a time.
Brewster is offline   Reply With Quote
Old 09-21-2024, 11:33 AM   #4982
Muskoka800
Senior Member
 
Join Date: Jul 2018
Drives: 2016 Scion FRS Release Series 2#439
Location: Chatham, Ontario, Canada
Posts: 728
Thanks: 4
Thanked 158 Times in 131 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Brewster View Post

Popular consensus seems to indicate only using a smaller pulley with a "built" engine.
As mine is. The Outfront Motorsports short-block has about 5000 kl. now.
The original #2 piston broke sending the rod through the top on the case.
__________________
Edelbrock S/C with CSG 94 & 91 maps
TRD Short Shifter, CTS/EvoX Brakes
Ohlin’s R&T Dampers, Hotchkis F/R Bars, Blox LCA & Toe Arms
235F/245R Conti ECS on TRD/Enkei wheels (street),
245/40 sq. ECF on 17x8 720Form GTF2 wheels (track)
Muskoka800 is offline   Reply With Quote
Old 09-23-2024, 10:04 AM   #4983
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 520
Thanks: 202
Thanked 210 Times in 145 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Muskoka800 View Post
As mine is. The Outfront Motorsports short-block has about 5000 kl. now.
The original #2 piston broke sending the rod through the top on the case.
Slap a thick head gasket on it to lower static CR before getting a smaller pulley. I'm running 12.2:1 now and wish I'd gone just a bit thicker.
__________________
B T is offline   Reply With Quote
Old 09-23-2024, 11:35 AM   #4984
Muskoka800
Senior Member
 
Join Date: Jul 2018
Drives: 2016 Scion FRS Release Series 2#439
Location: Chatham, Ontario, Canada
Posts: 728
Thanks: 4
Thanked 158 Times in 131 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by B T View Post
Slap a thick head gasket on it to lower static CR before getting a smaller pulley. I'm running 12.2:1 now and wish I'd gone just a bit thicker.
Yes, I planned ahead and went one size thicker than OEM when I assembled it.
__________________
Edelbrock S/C with CSG 94 & 91 maps
TRD Short Shifter, CTS/EvoX Brakes
Ohlin’s R&T Dampers, Hotchkis F/R Bars, Blox LCA & Toe Arms
235F/245R Conti ECS on TRD/Enkei wheels (street),
245/40 sq. ECF on 17x8 720Form GTF2 wheels (track)
Muskoka800 is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vortech Owner Thread & Setup Questions reyruiz191 Forced Induction 340 05-17-2022 01:44 PM
Edelbrock E-Force Supercharger itsibarra Forced Induction 938 07-31-2021 05:48 PM
Most annoyingly over-asked questions on FT86 forums mit_peid Off-Topic Lounge [WARNING: NO POLITICS] 36 01-16-2014 03:48 PM
Brz Info/Specs (helpful info for questions asked often) Gaen BRZ First-Gen (2012+) -- General Topics 0 05-24-2012 11:09 PM


All times are GMT -4. The time now is 01:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.