WHAT DID YOU DO TO YOUR BRZ TODAY?

[JD001]

Originally Posted by BirdTRD

.....just hope I can remember how it all goes back together!

Originally Posted by blsfrs

And here I thought you lost a 10mm socket.

Erm.... what am I missing? What's the backstory? Apologies, not keeping up with Forum stuff, my bad!!

[Ohio Enthusiast]

Originally Posted by JD001

Erm.... what am I missing? What's the backstory?

Losing 10mm sockets is a meme in the US, presumably due to them being metric (vs. Freedom Units that one would expect in the US) and fairly common on cars, and small enough to easily get lost - https://tiremeetsroad.com/2019/05/24...them-so-often/

[JD001]

Originally Posted by dpfarr

Trying to figure out lengths and turning some recessed areas for the clamps for my tray. 19 mm stainless steel. Not missing anymore sessions.

What kinda bike is that? Familiar with old skool BMX, never owned one, was too busy with road racers and mountain bikes...More recently started to think about Gravel bikes but my wife won't allow any type of bike as she sees them as dangerous..

[JD001]

Originally Posted by Ohio Enthusiast

Losing 10mm sockets is a meme in the US, presumably due to them being metric (vs. Freedom Units that one would expect in the US) and fairly common on cars, and small enough to easily get lost - https://tiremeetsroad.com/2019/05/24...them-so-often/

Is that like sending someone out to buy a left handed screwdriver..

[Ohio Enthusiast]

Originally Posted by JD001

Is that like sending someone out to buy a left handed screwdriver..

No, I don't think so. The general 10mm socket meme is that it's always lost, people have dozens of sockets in different sizes (like 11 and 9 mm) but never a 10, etc. This particular usage by @blsfrs is jokingly thinking that @BirdTRD has lost a 10mm socket and tore out the interior of the car to try and find it.

[tarzan_nojane]

I thought it was my FR-S keeping me young. Now I realize it is to this forum that I owe the thanks...

[dpfarr]

Originally Posted by JD001

What kinda bike is that? Familiar with old skool BMX, never owned one, was too busy with road racers and mountain bikes...More recently started to think about Gravel bikes but my wife won't allow any type of bike as she sees them as dangerous..

Just a modern bmx bike. Almost 40 and still rip when I can.

[gav_abr]

The two most recent additions to my car have been a dumb license plate and sticker.

[BirdTRD]

In the de-mouseification project on the BRZ, I designed and printed some body plugs to fill the holes in the trunk. The "tape" that Subaru uses drifts over time and leaves a mess.

Posted them up on Thingiverse along with the Fusion360 .f3d file for editing sizes.
https://www.thingiverse.com/thing:6266485

[JD001]

Originally Posted by BirdTRD

In the de-mouseification project on the BRZ, I designed and printed some body plugs to fill the holes in the trunk. The "tape" that Subaru uses drifts over time and leaves a mess.

Posted them up on Thingiverse along with the Fusion360 .f3d file for editing sizes.
https://www.thingiverse.com/thing:6266485

Plugging holes just adds weight.. Come on man, get with it..

[Kiyora]

Originally Posted by soundman98

be sure to put some anti-seize on those tire caps! they're all aluminum, and the valve stems are all bronze/steel. dissimilar metals create galvanic corrosion, which murphies law dictates, they will seize, but only once one of the tires deflates enough that you can't fill it easily anymore.

i learned the hard way years ago, and had to cut all 4 of mine off with a dremel without damaging the valve stem.. it was a long saturday...

Oh my goodness.. thank you for telling me I'll do it this weekend!

[Grady]

Got a car cover for it!

[dpfarr]

Did my pads this afternoon. Very happy to have done the whole thing with needle nose pliers. Took me about an hour because I had to redo a rear caliper because I put two of the same pads in the previous one.

[CBRZY]

tried drifting for the first time