WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1396 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Wally86 · 06-07-2022, 08:00 PM

Quote:

Originally Posted by 2020BRZtS

Like this?

Yup! Top of the window is best

(and it doesn't block your rear view like the OEM one does... I mean this wing doesn't help either lol)

soundman98 · 06-07-2022, 11:35 PM

i agree. top mount external is even better though

LRNAD90 · 06-08-2022, 12:43 AM

Quote:

Originally Posted by 2020BRZtS

Like this?

Yup.. Is that the 'Gazoz' light kit?

https://www.ebay.com/itm/LED-3rd-Thi...75.c1#viTabs_0

https://www.amazon.com/GAZOZ-PERFORM.../dp/B07N3BPGQG

Fit nice?

gen3v8 · 06-08-2022, 04:01 AM

Some spoilers have the brake led in the trailing edge. This must increase rear view and enhance safety visibility. Not on this platform I guess.

2020BRZtS · 06-08-2022, 01:41 PM

Quote:

Originally Posted by LRNAD90

Yup.. Is that the 'Gazoz' light kit?

https://www.ebay.com/itm/LED-3rd-Thi...75.c1#viTabs_0

https://www.amazon.com/GAZOZ-PERFORM.../dp/B07N3BPGQG

Fit nice?

I have the INTEC one and Wally's looks pretty similar. It was my first mod for the exact reason you said. Driving home from the dealer I was looking under trucks in the next lane.

Wally86 · 06-09-2022, 10:20 AM

Quote:

Originally Posted by 2020BRZtS

I have the INTEC one and Wally's looks pretty similar. It was my first mod for the exact reason you said. Driving home from the dealer I was looking under trucks in the next lane.

Yup. Also the Intec.

soundman98 · 06-09-2022, 10:21 PM

my louver light is a toyota corolla. the one under the class is the mustang cdc. really happy with both, and they were half the price of that gazoz, combined...

tarzan_nojane · 06-10-2022, 10:57 PM

Probably my favorite mod to my '14 FR-S

2020BRZtS · 06-10-2022, 11:16 PM

Quote:

Originally Posted by tarzan_nojane

Probably my favorite mod to my '14 FR-S

Love your back deck.

euge · 06-14-2022, 04:51 AM

Just installed RCE Yellow springs on my '20 earlier this week. I've been driving around for a little bit to listen for any weird noises. I'm hearing some rattling in the rear passenger side, but I'm confident it's the carpeted side trim in the trunk. I can hear it rattle even at idle from the exhaust, and it essentially goes away when I shove a sweatshirt between the metal and carpet. Everything was torqued and re-torqued during install, but I am going to put it back in the air and re-torque everything again tomorrow.

The install itself was very straightforward for the fronts. When it came time to doing the rear end, I found out I put the provided dust boot covers on the fronts instead of the rears. This caused me to essentially redo everything just for that small mistake. I would say this was good practice and a good introduction into basic suspension work.

Busybee · 06-28-2022, 05:10 PM

Installed the OEM mudguard. As many mentioned, it’s top quality. Got it from Amazon.

“Genuine Scion Accessories PU060-18013-P1 Mud Guard”

Install was without removing the real wheel which was a real pain

. Reason was I did not receive my jack stands and wanted them on her. Though but was possible. Used the 90 degree attachment with short countersink drill bit. Push the liner hold it and ask your wife to pull the trigger

Results are very satisfying

Sent from my iPhone using Tapatalk

Busybee · 06-29-2022, 09:43 PM

Extended the sinked muffler tips

Being adjustable for your like is great!

Thanks to “Killer B Motorsport”

Sent from my iPhone using Tapatalk

fabrzio · 07-01-2022, 01:15 AM

Installed the Perrin wing riser kit on the OEM spoiler. Have to say I think it looks so much better in person than it does online in pics. Very pleased!

Oxyg3n · 07-06-2022, 01:57 AM

Finally got new wheels after 6 long years of ownership. Really makes the car feel like my own now.

What do you guys think? Tire size is same as OEM @ 215/45r17, but the PS4S looks a lot meatier. Stock wheels really sink in at the back.

06-07-2022, 11:35 PM	#19532
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,673 Times in 6,781 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	i agree. top mount external is even better though __________________ "The time you enjoy wasting is not wasted time"

06-08-2022, 04:01 AM	#19534
gen3v8 Barred Join Date: Oct 2020 Drives: My18 wrxsti My19 brzts Location: Botany Bay Posts: 1,144 Thanks: 729 Thanked 1,187 Times in 610 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Some spoilers have the brake led in the trailing edge. This must increase rear view and enhance safety visibility. Not on this platform I guess. __________________ Wait until my Flex capacitor hits 88

06-09-2022, 10:21 PM	#19537
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,673 Times in 6,781 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	my louver light is a toyota corolla. the one under the class is the mustang cdc. really happy with both, and they were half the price of that gazoz, combined... __________________ "The time you enjoy wasting is not wasted time"

06-28-2022, 05:10 PM	#19541
Busybee Senior Member Join Date: Feb 2018 Drives: BRZ limited Location: MA and NY Posts: 421 Thanks: 1,724 Thanked 214 Times in 108 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	WHAT DID YOU DO TO YOUR BRZ TODAY? Installed the OEM mudguard. As many mentioned, it’s top quality. Got it from Amazon. “Genuine Scion Accessories PU060-18013-P1 Mud Guard” Install was without removing the real wheel which was a real pain . Reason was I did not receive my jack stands and wanted them on her. Though but was possible. Used the 90 degree attachment with short countersink drill bit. Push the liner hold it and ask your wife to pull the trigger Results are very satisfying Sent from my iPhone using Tapatalk __________________ Mazda 323F BA 1997 - Overseas Mazda 323 BG 1994 - Sold Mazda 323 BG 1991 - Sold

06-29-2022, 09:43 PM	#19542
Busybee Senior Member Join Date: Feb 2018 Drives: BRZ limited Location: MA and NY Posts: 421 Thanks: 1,724 Thanked 214 Times in 108 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Extended the sinked muffler tips Being adjustable for your like is great! Thanks to “Killer B Motorsport” Sent from my iPhone using Tapatalk __________________ Mazda 323F BA 1997 - Overseas Mazda 323 BG 1994 - Sold Mazda 323 BG 1991 - Sold

06-14-2022, 04:51 AM	#19540
euge Junior Member Join Date: Jan 2022 Drives: 2020 CWP Location: Seattle & Virginia Posts: 1 Thanks: 0 Thanked 2 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just installed RCE Yellow springs on my '20 earlier this week. I've been driving around for a little bit to listen for any weird noises. I'm hearing some rattling in the rear passenger side, but I'm confident it's the carpeted side trim in the trunk. I can hear it rattle even at idle from the exhaust, and it essentially goes away when I shove a sweatshirt between the metal and carpet. Everything was torqued and re-torqued during install, but I am going to put it back in the air and re-torque everything again tomorrow. The install itself was very straightforward for the fronts. When it came time to doing the rear end, I found out I put the provided dust boot covers on the fronts instead of the rears. This caused me to essentially redo everything just for that small mistake. I would say this was good practice and a good introduction into basic suspension work.

07-01-2022, 01:15 AM	#19543
fabrzio Junior Member Join Date: Feb 2021 Drives: '20 Subaru BRZ Sport-tech RS Location: Ontario Posts: 2 Thanks: 0 Thanked 2 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Installed the Perrin wing riser kit on the OEM spoiler. Have to say I think it looks so much better in person than it does online in pics. Very pleased! Attached Images

07-06-2022, 01:57 AM	#19544
Oxyg3n Senior Member Join Date: Oct 2015 Drives: 2017 BRZ - WRB Location: Bay Area Posts: 319 Thanks: 115 Thanked 208 Times in 108 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	Finally got new wheels after 6 long years of ownership. Really makes the car feel like my own now. What do you guys think? Tire size is same as OEM @ 215/45r17, but the PS4S looks a lot meatier. Stock wheels really sink in at the back.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) -- General Topics	8	03-31-2012 08:53 AM

User Name		Remember Me?
Password