Can Ecutek disable diagnostic codes?

[Kiske]

Does ecutek have the ability to permenatly disable DTC's? I cannot seem to find anything in the help menu/faq on the program. Looking to get rid of a few troublesome evap codes like p0441 for good.

[Kodename47]

Originally Posted by Kiske

Does ecutek have the ability to permenatly disable DTC's? I cannot seem to find anything in the help menu/faq on the program. Looking to get rid of a few troublesome evap codes like p0441 for good.

Yes, I would have to check for those specific codes but I'd presume you can. Any idea why the codes are there to start?

You have to be able to edit your tune though.

[Kiske]

Originally Posted by Kodename47

Yes, I would have to check for those specific codes but I'd presume you can. Any idea why the codes are there to start?

You have to be able to edit your tune though.

Kodename47, a couple codes come and go every-other week. I'm 99% sure that is is basiclly because I have an EBCS/ecutek boost controller. The code comes and goes but when the CEL illuminates it locks me out of traction crontrol. Which is annoying when the wheels spin so easily on a turbo car.

If you can point me in a direction it would be appreciated. And yes my tune is unlocked for editing.

[Kodename47]

Originally Posted by Kiske

If you can point me in a direction it would be appreciated. And yes my tune is unlocked for editing.

In that case:
Open the file, in the maps tab ensure the tree is done by function. Then there is a branch called DTC (IIRC) and in that are what you need. In the long list of codes, if it's ticked then it's enabled, so untick to disable them.