P1261 and 1262 after spark plug change - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Remmenator · 05-17-2020, 07:06 PM

I changed the spark plugs on my car and in doing so seem to have caused some issues. Upon starting, the car fired once and died several times, only staying running once before I killed it due to a very rough idle. It sounded like it was running on 2 cylinders. My first thought was misfiring due to the new plugs however it does not seem like this is true anymore.

I pulled 3 codes from the car, P1261, P1262, and P0451. 1261 and 2 seem to be injector related, while 0451 is in the evap system. My guess is that because I had to move the ECU and turn it (nothing was disconnected), I may have created a wiring issue. However, I am unsure of how to test that hypothesis and am worried about damaging the engine.

I would really appreciate some guidance on what the issues may be and how to potentially diagnose them.

The car is a 2013 M/T FRS with Open Flash header and tune along with the Greddy intake. 60k miles.

humfrz · 05-17-2020, 10:34 PM

I'd suggest you make sure the ECU is grounded good.

Remmenator · 05-20-2020, 04:09 PM

You nailed it! Thank you so much. The bottom bolt on the ECU is the ground and that was causing the issue.

05-17-2020, 07:06 PM	#1
Remmenator Junior Member Join Date: Jun 2014 Drives: Black 2013 FR-S Location: Ohio Posts: 5 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 1 Thread(s)	P1261 and 1262 after spark plug change I changed the spark plugs on my car and in doing so seem to have caused some issues. Upon starting, the car fired once and died several times, only staying running once before I killed it due to a very rough idle. It sounded like it was running on 2 cylinders. My first thought was misfiring due to the new plugs however it does not seem like this is true anymore. I pulled 3 codes from the car, P1261, P1262, and P0451. 1261 and 2 seem to be injector related, while 0451 is in the evap system. My guess is that because I had to move the ECU and turn it (nothing was disconnected), I may have created a wiring issue. However, I am unsure of how to test that hypothesis and am worried about damaging the engine. I would really appreciate some guidance on what the issues may be and how to potentially diagnose them. The car is a 2013 M/T FRS with Open Flash header and tune along with the Greddy intake. 60k miles.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Helpful DIY Spark plug change video	DTMdreaming	Engine, Exhaust, Transmission	13	10-17-2020 08:55 PM
Issues with white smoke after spark plug change	Japanese_Carbon	Issues \| Warranty \| Recalls / TSB	1	01-23-2020 09:37 AM
Spark plug change - dealership price?	wparsons	CANADA	47	05-08-2019 06:48 AM
Spark plug failure	BRZ68	Issues \| Warranty \| Recalls / TSB	9	06-12-2017 07:44 AM
P0351 bad spark plug...	Jaden	Engine, Exhaust, Transmission	3	01-02-2016 10:19 AM

05-17-2020, 10:34 PM	#2
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 29,866 Thanks: 28,787 Thanked 31,813 Times in 16,424 Posts Mentioned: 708 Post(s) Tagged: 2 Thread(s)	I'd suggest you make sure the ECU is grounded good.

05-20-2020, 04:09 PM	#3
Remmenator Junior Member Join Date: Jun 2014 Drives: Black 2013 FR-S Location: Ohio Posts: 5 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 1 Thread(s)	You nailed it! Thank you so much. The bottom bolt on the ECU is the ground and that was causing the issue.

User Name		Remember Me?
Password