WHAT DID YOU DO TO YOUR BRZ TODAY?

[norcalpb]

Originally Posted by ichitaka05

Installed CUSCO Touring-A strut, Eibach Pro-Kit springs w Verus Engineering top hats. Rear, did install SPC LCA & finally installed Subaru 2 piston w KNS bracket.

Also installed Viofo A129 Pro Duo

How do you like those struts? I’m thinking about trying them once my Bilstein B6 go out.

[ichitaka05]

Originally Posted by norcalpb

How do you like those struts? I’m thinking about trying them once my Bilstein B6 go out.

So far, so good. You feel a bit more of those small dips & bumps. Bigger ones, you don’t feel as much. I’m hoping to test em out when local Autox starts up again.

[NaturallyAspirated]

Got any pics of the A129 rear camera installed? I've got the front unit installed on the windshield but haven't had a chance to route the cable to the rear and install the rear cam.

[soundman98]

Originally Posted by BA9092

I spent less than $50 on the footwell lighting - just a kit from Amazon.

Also, the carbon fiber/leather/perforated leather steering wheel from East End Raceshop was $310 shipped.

that was part of an option package from subaru. my first car came with red lights, the second came with blue lights. couldn't stand them. i have both kits somewhere...

[HaXx]

Originally Posted by soundman98

that was part of an option package from subaru. my first car came with red lights, the second came with blue lights. couldn't stand them. i have both kits somewhere...

sell me the blue lights haha

[soundman98]

if i can find them again. i looked very quickly at one of my car parts shelf and didn't find them right away. it'll require more digging. but if i do find them you can have them for the cost of shipping.

this was the first car, the second was the same pod, just with blue leds... i was still mourning when the second replaced it, so never got pictures before i took them out.

[HaXx]

Originally Posted by soundman98

if i can find them again. i looked very quickly at one of my car parts shelf and didn't find them right away. it'll require more digging. but if i do find them you can have them for the cost of shipping.

this was the first car, the second was the same pod, just with blue leds... i was still mourning when the second replaced it, so never got pictures before i took them out.

yeah, i like the interior footwell lighting a lot, its just if i pulled the trigger on EVERYTHING i wanted to do to the car, id be $30,000 in credit card debt haha! so if you fend them, id be happy to get first grabs. I did just get a sponsorship with Braum seats, and i got all blue reclineables, so i was looking into blue footwell lighting.. (and a black w/ blue stitching steering wheel) haha

[HaXx]

Originally Posted by BA9092

I spent less than $50 on the footwell lighting - just a kit from Amazon.

Also, the carbon fiber/leather/perforated leather steering wheel from East End Raceshop was $310 shipped.

i did not know of that wheel... and i like it a lot...

[JD001]

Had enough of the car sitting there forlorn.. put the battery back in and took it out for a drive. It was first or second week of March when I last drove her!!

It was a nice guilty pleasure, roads empty.. Even got a tiny bit of the motorway (M25).. The M25 is a major highway that circumnavigates London, it was empty.. it's so surreal!

[aKaGorganZola]

Got to finally install my verus engineering AOS with the drain back and coolant kits for it. And a few days ago I dropped the tranny and diff oils and put in motul 300. Steadily crossing off my supporting mod list before I order my Edelbrock kit!

[soundman98]

it was too nice outside not to be doing something.

so i changed the oil on the car and truck--both of which got a fumoto valve FINALLY. and i added the 86speed hood struts i've had since that super-sale last year...

[grumpysnapper]

I decided to change to lithium from a Braille 904, and try to clean up the wiring while adding an isolator.
Decided on a Lithiumax at about half the weight of the 904 at 2.5kg, and with 48 AH... for about the same replacement cost.

(and please excuse the temporary velcro wrapping on the right of picture)

[BirdTRD]

Originally Posted by grumpysnapper

I decided to change to lithium from a Braille 904, and try to clean up the wiring while adding an isolator.
Decided on a Lithiumax at about half the weight of the 904 at 2.5kg, and with 48 AH... for about the same replacement cost.

(and please excuse the temporary velcro wrapping on the right of picture)

Nice work!

[Guru Woodman]

I replaced the rear rotors and pads with a set of Stoptechs.
The fronts were done last year.
I used this kit from FT86Motorsports. I can highly recommend these guys. Shipping was surprisingly quick.

I still have to replace the lines with the supplied stainless ones but I am waiting on an Amazon bleeder kit and I obviously could not wait any longer. As you can see, they were long overdue.