BRZ Headlight pin/wiring diagram - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

2SeeKU · 11-20-2013, 04:51 AM

Hey guys,
I'm installing a set of BRZ headlights on my GT this weekend and was just wondering if anyone has the wiring diagram for the headlight connector.

I believe it's (for the right headlight):

[Pin 1] White - Red Stripe : Indicator
[Pin 2] Blank
[Pin 3] Red : Parkers
[Pin 4] Black: Ground
[Pin 5] Blue : Low beam
[Pin 6] Black - White Stripe: Ground
[Pin 7] White - Blue Stripe: High Beam
[Pin 8] Black - White Stripe: Ground

I've got the plugs/connector, so the plan is to simply repin the BRZ connectors.

Also, does anyone know of a indicator replacement for the GT/FRS? As l'll have the indicator in the headlights l was thinking of removing the stock GT ones.

Cheers!

2SeeKU · 11-21-2013, 05:44 PM

Looking through the wiring diagram for the BRZ and it looks correct, although l just have the left/right switch.

Efferalgan · 06-03-2014, 04:01 PM

Thanks for the diagram! I'm planning to install Spec-D headlights on my GT86 and put the Chargespeed bumper on w/o any light elements.

AVodka14 · 06-15-2014, 09:06 PM

Where did you purchase your BRZ headlights @2SeeKU?

2SeeKU · 06-16-2014, 07:19 AM

Quote:

Originally Posted by AVodka14

Where did you purchase your BRZ headlights @2SeeKU?

From another member who was parting out their car. Right place, right time!

Hawker271 · 07-19-2017, 09:57 PM

Sorry for Bumping. Anyone wire it so that the boomerang is always on?

Sel_brz17 · 04-23-2018, 12:38 AM

so the pins can come off? no cutting of wires required??

Thaeyo · 08-02-2018, 02:53 AM

Quote:

Originally Posted by Hawker271

Sorry for Bumping. Anyone wire it so that the boomerang is always on?

+1 I need help too. I've been able to wire the BRZ boomerang as DRL or on with headlights. But not both.

I've even tried setting the boomerangs to function with parking/headlights, then double tapping both LED wire to the DRL wire (green wire on passenger side, also removed the resistor).

Any help in the right direction would be nice!

BOND007_LTK · 08-15-2019, 02:10 PM

Quote:

Originally Posted by Thaeyo

+1 I need help too. I've been able to wire the BRZ boomerang as DRL or on with headlights. But not both.

I've even tried setting the boomerangs to function with parking/headlights, then double tapping both LED wire to the DRL wire (green wire on passenger side, also removed the resistor).

Any help in the right direction would be nice!

Not sure if you guys ever got the answer but there is a thread on here that involves getting diodes and stuff. Cheaper but somewhat complicated.

I got the always on kit and love it. Because it dims the drl which is always on too at night which is inportant as they are very bright. Its plug and play. Vs finding the diode current etc etc.

Thaeyo · 08-17-2019, 03:25 PM

Quote:

Originally Posted by BOND007_LTK

Not sure if you guys ever got the answer but there is a thread on here that involves getting diodes and stuff. Cheaper but somewhat complicated.

I got the always on kit and love it. Because it dims the drl which is always on too at night which is inportant as they are very bright. Its plug and play. Vs finding the diode current etc etc.

I was able to wire a tap-a-fuse through the firewall to the interior fuse box for always on, took a little more work, but its working

iconic · 01-21-2020, 07:35 PM

Anyone know which pin position on the 8 pin connector is the DRL?

Yoshoobaroo · 06-25-2020, 05:13 PM

Quote:

Originally Posted by Thaeyo

I was able to wire a tap-a-fuse through the firewall to the interior fuse box for always on, took a little more work, but its working

Do you remember which fuse by chance?

Quote:

Originally Posted by iconic

Anyone know which pin position on the 8 pin connector is the DRL?

Is it the ones labeled “Parker” on the first post?

Magoo · 06-28-2020, 02:17 AM

Quote:

Originally Posted by Yoshoobaroo

Do you remember which fuse by chance?

Is it the ones labeled “Parker” on the first post?

That's the way I interpret it.

I am trying to get the DRL to work in the spot on the BRZ light that was the turn indicator. I disconnected the resistor, ran a wire from the green wire plug to the spot on the new BRZ light connector (spot 8, green wire), but no luck. Fuse is good.

Any ideas? Will the BRZ yellow bulb not work as a DRL?

11-20-2013, 04:51 AM	#1
2SeeKU Senior Member Join Date: Mar 2013 Drives: Raven GT86 & Subaru WRX CS6 Location: ACT Posts: 105 Thanks: 16 Thanked 42 Times in 27 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	BRZ Headlight pin/wiring diagram Hey guys, I'm installing a set of BRZ headlights on my GT this weekend and was just wondering if anyone has the wiring diagram for the headlight connector. I believe it's (for the right headlight): [Pin 1] White - Red Stripe : Indicator [Pin 2] Blank [Pin 3] Red : Parkers [Pin 4] Black: Ground [Pin 5] Blue : Low beam [Pin 6] Black - White Stripe: Ground [Pin 7] White - Blue Stripe: High Beam [Pin 8] Black - White Stripe: Ground I've got the plugs/connector, so the plan is to simply repin the BRZ connectors. Also, does anyone know of a indicator replacement for the GT/FRS? As l'll have the indicator in the headlights l was thinking of removing the stock GT ones. Cheers! Attached Images Last edited by 2SeeKU; 11-20-2013 at 07:07 AM.

11-21-2013, 05:44 PM	#2
2SeeKU Senior Member Join Date: Mar 2013 Drives: Raven GT86 & Subaru WRX CS6 Location: ACT Posts: 105 Thanks: 16 Thanked 42 Times in 27 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Looking through the wiring diagram for the BRZ and it looks correct, although l just have the left/right switch. Last edited by 2SeeKU; 11-21-2013 at 05:56 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 2013 Scion FR-S & Subaru BRZ Electrical Wiring Diagram	azian_advanced	DIY (Do-It-Yourself) Guides	16	09-09-2017 04:18 PM
DIY: Alarm installing wiring diagram	trueno86power	DIY (Do-It-Yourself) Guides	17	02-07-2014 09:03 PM
Wiring Diagram for base radio?	-max-	Electronics \| Audio \| NAV \| Infotainment	2	12-19-2012 04:39 PM
So is there a DIY yet for BRZ headlight wiring for the FR-S?	seven	Cosmetic Modification (Interior/Exterior/Lighting)	4	11-25-2012 09:24 PM
AWD FT-86 Diagram	AaronCompNetSys	Scion FR-S / Toyota 86 GT86 General Forum	52	11-22-2011 01:53 PM

06-03-2014, 04:01 PM	#3
Efferalgan Senior Member Join Date: Sep 2012 Drives: Toyota GT 86 Location: Moscow, Russia Posts: 460 Thanks: 409 Thanked 225 Times in 135 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Thanks for the diagram! I'm planning to install Spec-D headlights on my GT86 and put the Chargespeed bumper on w/o any light elements.

06-15-2014, 09:06 PM	#4
AVodka14 Senior Member Join Date: Aug 2012 Drives: 2013 Raven FRS MT Location: KY Posts: 857 Thanks: 351 Thanked 302 Times in 185 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Where did you purchase your BRZ headlights @2SeeKU?

07-19-2017, 09:57 PM	#6
Hawker271 Member Join Date: Jan 2016 Drives: Scion FR-S 2013 Location: Mansfield, TX Posts: 36 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sorry for Bumping. Anyone wire it so that the boomerang is always on?

04-23-2018, 12:38 AM	#7
Sel_brz17 Member Join Date: Apr 2018 Drives: BRZ 2017 Location: California Posts: 19 Thanks: 8 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	so the pins can come off? no cutting of wires required??

01-21-2020, 07:35 PM	#11
iconic Member Join Date: Jul 2019 Drives: 2015 Scion FRS Auto Location: New Jersey Posts: 45 Thanks: 5 Thanked 12 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone know which pin position on the 8 pin connector is the DRL?

User Name		Remember Me?
Password