Today I Learned...

[NoHaveMSG]

Originally Posted by Wally86

I do this more than I want to admit especially for my less visited hobbies in the garage. Now I just check my amazon purchases first and then go hunting in the house

I have random parts everywhere. Sitting at my desk I have my AIM Solo sitting to my left. My main drawer has a front main seal, header gaskets, FP/OP gaskets, forged clutch fork and pivot. Drawer to the right of the has my PA quick release splitter mounts and splitter rod clevis. Below that my OBDlink and XGPS160. Next to my desk is my long acre camber gauge and splitter rod material. I just went down stairs to check the thread pitch for the exhaust manifold studs on a long block I have sitting in the warehouse.

[Wally86]

Originally Posted by NoHaveMSG

I have random parts everywhere. Sitting at my desk I have my AIM Solo sitting to my left. My main drawer has a front main seal, header gaskets, FP/OP gaskets, forged clutch fork and pivot. Drawer to the right of the has my PA quick release splitter mounts and splitter rod clevis. Below that my OBDlink and XGPS160. Next to my desk is my long acre camber gauge and splitter rod material. I just went down stairs to check the thread pitch for the exhaust manifold studs on a long block I have sitting in the warehouse.

I knew it wasn't just me

[JD001]

Originally Posted by Spuds

Fify. Needs to have export-able armor package iirc, and I don't think the US keeps those in inventory.

I'm hoping that it's not "years", I want the war to end as it is really screwing up my plans!! Being really selfish here..

[Spuds]

Originally Posted by NoHaveMSG

I have random parts everywhere. Sitting at my desk I have my AIM Solo sitting to my left. My main drawer has a front main seal, header gaskets, FP/OP gaskets, forged clutch fork and pivot. Drawer to the right of the has my PA quick release splitter mounts and splitter rod clevis. Below that my OBDlink and XGPS160. Next to my desk is my long acre camber gauge and splitter rod material. I just went down stairs to check the thread pitch for the exhaust manifold studs on a long block I have sitting in the warehouse.

Also thanks!

I really need one of those check the thread boards they have at hardware stores. If it screws in, you found the right one. If not, keep looking.

[Tcoat]

Originally Posted by NoHaveMSG

I have random parts everywhere. Sitting at my desk I have my AIM Solo sitting to my left. My main drawer has a front main seal, header gaskets, FP/OP gaskets, forged clutch fork and pivot. Drawer to the right of the has my PA quick release splitter mounts and splitter rod clevis. Below that my OBDlink and XGPS160. Next to my desk is my long acre camber gauge and splitter rod material. I just went down stairs to check the thread pitch for the exhaust manifold studs on a long block I have sitting in the warehouse.

Originally Posted by Wally86

I knew it wasn't just me

Amateurs
When you have random parts that have been kicking around with no purpose for 45 years we will talk.

[Wally86]

Originally Posted by Tcoat

Amateurs
When you have random parts that have been kicking around with no purpose for 45 years we will talk.

What you're saying is.... you have parts older than me?

[Tcoat]

Originally Posted by Wally86

What you're saying is.... you have parts older than me?

Well the part is 58 years old I only have had it for 45 years.

[Wally86]

Originally Posted by Tcoat

Well the part is 58 years old I only have had it for 45 years.

So just a trio of years younger than my mom. Cool cool cool

[Tcoat]

Originally Posted by Wally86

So just a trio of years younger than my mom. Cool cool cool

That means I am older than your mom.

[Wally86]

Originally Posted by Tcoat

That means I am older than your mom.

I had no doubt. I believe you're an Octo... pus? gon? generian? lol.

[soundman98]

Originally Posted by Spuds

Also thanks!

I really need one of those check the thread boards they have at hardware stores. If it screws in, you found the right one. If not, keep looking.

https://www.menards.com/main/hardwar...pos=1&exp=true

https://www.menards.com/main/hardwar...pos=2&exp=true

https://www.amazon.com/Bolt-Thread-C.../dp/B08VBHCXKZ

i keep those cable one's in each of my tool boxes for exactly that reason

[NoHaveMSG]

Originally Posted by Spuds

Also thanks!

I really need one of those check the thread boards they have at hardware stores. If it screws in, you found the right one. If not, keep looking.

I used something similar. Usually I just use my thread file to check the pitch.

[Spuds]

Originally Posted by soundman98

https://www.menards.com/main/hardwar...pos=1&exp=true

https://www.menards.com/main/hardwar...pos=2&exp=true

https://www.amazon.com/Bolt-Thread-C.../dp/B08VBHCXKZ

i keep those cable one's in each of my tool boxes for exactly that reason

Lol I literally started searching for some of those the minute after I posted. We have a bunch of stuff we need to order from Amazon so these are on the list.

[spcmafia]

Today I learned that Im in the wrong line of work.
My supervisor is a tech geek, and he was trying to show me the new monitors he wants to order for us from this company called Insight. Apparently they supply our company with all the tech.
Samsung UWQHD 3440x1440 32-inch with 75Hz. Costs the company, $400.

To which I replied how an LG Ultragear 32-inch QHD, 165Hz with the same 1440 resolution is about $199 and we should look into those. He replies with “Those are listed for $1600”.

Insane, absolutely insane. I mean, is not my money or problem, but still. That is straight robbery.