|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Boosted Member
Join Date: Jan 2013
Drives: 2013 SWP BRZ Limited
Location: Portland, OR
Posts: 1,979
Thanks: 524
Thanked 945 Times in 497 Posts
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
|
Revworks UEL header + Nameless OP/DP combo
Does anyone have this setup, and if so, was there any fitment issues? I've heard rumors that it hits the frame on WOT. Does it rattle when it hits the frame?
My current set up is stock header, stock OP, catless frontpipe and Invidia N1. I am going to put the revworks header soon, but was concerned with rasp without a resonator/cat in the front pipe. I've seen videos with the Invidia N1 with Revworks UEL with the stock front pipe (Cat/Resonator) and 0 rasp.
__________________
Suzuki Swift GTI '89, Subaru Impreza L '96, Lancer OZ '03, Subaru Impreza WRX '06, Honda CBR600RR Graffiti, Volvo c30 T5 R '11, Subaru BRZ '13, Audi RS4 2007
SUV's: Mercedes Benz R500 '06, Mercedes Benz ML350 '12 |
![]() |
![]() |
![]() |
#2 | |
Senior Member
Join Date: Aug 2012
Drives: Asphalt FRS
Location: Cottage Grove, MN
Posts: 1,272
Thanks: 669
Thanked 981 Times in 540 Posts
Mentioned: 84 Post(s)
Tagged: 3 Thread(s)
|
Quote:
[ame="http://www.youtube.com/watch?v=QbndvIrWGys"]FRS Revworks UEL header, Tsudo header back exhaust - YouTube[/ame] |
|
![]() |
![]() |
![]() |
#3 |
Go-Kart Enthusiast
Join Date: Aug 2013
Drives: Toyota Scion FRS
Location: Yup
Posts: 800
Thanks: 576
Thanked 309 Times in 188 Posts
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
![]() |
dear god in heaven.
I have the nameless OP/downpipe into full exhaust coming soon. any day it should be here. I want to get headers to maximize performance but I am so scared of it being as loud as you just showed me!! I have the catted downpipe, resonator and 5" mufflers.. I hope I can find a set of headers to get the power I want and keep it sounding reasonable. the rev works UEL look so awesome but that 1 yr warranty is utter shit.
__________________
FRS
Current mods: K&N air filter, OFT, OFH, berk high flow cat front pipe, Q300 exhaust, lighter wheels |
![]() |
![]() |
![]() |
#5 | |
Boosted Member
Join Date: Jan 2013
Drives: 2013 SWP BRZ Limited
Location: Portland, OR
Posts: 1,979
Thanks: 524
Thanked 945 Times in 497 Posts
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I've seen videos of Borla UEL headers with unresonated catless front pipes with the Invidia N1 and it doesn't sound raspy. I'm assuming the Borla/Revworks will have similar sounds. The Invidia mid-pipe has a big resonator, and this muffler seems to have one of the lowest pitch exhaust notes in the market. I'm hoping this is enough to keep the rasp down, but I'll post some vids with various set ups once I install them. possible set-ups are: Revworks UEL to -> Invidia catless/unresonated front pipe Stock front pipe Nameless OP/DP catted to -> Invidia N1 2.5" exhaust. I don't think the overpipe will make any difference regarding exhaust notes.
__________________
Suzuki Swift GTI '89, Subaru Impreza L '96, Lancer OZ '03, Subaru Impreza WRX '06, Honda CBR600RR Graffiti, Volvo c30 T5 R '11, Subaru BRZ '13, Audi RS4 2007
SUV's: Mercedes Benz R500 '06, Mercedes Benz ML350 '12 |
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
Join Date: Oct 2012
Drives: 94 civic hatch, Whiteout frs
Location: VanCity
Posts: 181
Thanks: 45
Thanked 78 Times in 44 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I do have that set up. I'm running rev headers, nameless with cat (no herz) and Perrin resonated cat back. The N1 will prob make it rasp a little. I got one of the first revworks headers so they more have revised it. But my pipes are very very tight. Fully loosened and adjusted it's still rite by the sub frame. U need to unbolt the motor mount to get the nameless pipe in. After that u gotta try to get a good fitting gasket and adjust the pipes. My only clinks when I go over big bumps or when the engine moves. MY set up isn't raspy because of the Perrin, however like I said; N1 will possibly give u a little rasp. Maybe go for the nameless with the hertz. I'll get a vid up soon. Been really busy with midterms |
|
![]() |
![]() |
|
|
![]() |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nameless Performance Overpipe/Downpipe Combo | Jason@Nameless | Engine, Exhaust, Transmission | 277 | 04-04-2018 01:37 AM |
FS - Greddy SP Elite & Nameless Over/Down Pipe Combo | Thatruth2001 | Engine, Exhaust, Bolt-Ons | 8 | 10-09-2013 01:16 AM |
Nameless 3" w/4" mufflers and Revworks UEL | The Racers Line | Engine, Exhaust, Transmission | 15 | 07-23-2013 12:07 AM |
Revworks UEL header, Tsudo catback vids | Opposed | Engine, Exhaust, Transmission | 8 | 05-15-2013 02:36 PM |
WTB: Nameless Frontpipe/overpipe + Helmholtz combo | LeeMaster | Engine, Exhaust, Bolt-Ons | 4 | 04-11-2013 05:42 AM |