FR-S Turbo Build

[DarkPira7e]

Well, I'm impulsive, what can I say. Southbend stage 3 clutch, Verus clutch fork and pivot! Interestingly enough, the clutch itself is an Exedy manufactured product. The pressure plate is just spray painted red, the paint smell was quite pungent when I opened the box, and there was some parts they missed. Not that it matters, just putting that info out there for people who may be hoping for something expertly executed with aesthetics in mind.
I love that break-in instructions are included ON PAPER. No webpage deciphering or hunting.


The clutch fork is much more heavy duty feeling than I had expected. I have absolutely no doubt that this piece could withstand literally anything. The pivot looks nice, bling honestly.

[DarkPira7e]

Got a wideband put together for me at VEMS with the Bosche 4.9LSU sensor. Unsure what I'm going to add as secondary (it's a dual display) but I'll figure it out.

[DarkPira7e]

Decided to measure the turbo, since nobody seems to run or have data on it.

Just to rehash- it's a Boostlab BL5858 journal bearing turbo.

[Joveen]

That thing is beautiful

Sent from my SM-N960U using Tapatalk

[DarkPira7e]

Got my wideband installed today!

[DarkPira7e]

Well, I made a decision to end my suffering. I'm ditching the CXracing manifold and bought the JDL EL manifold/downpipe setup. Not recirculating the wastegate dump back into the exhaust, if I need to be quiet I will just stay out of boost.


The build looks like this now-


Engine/Fuel/Electronics-

IAG Stage 1 Shortblock 10:1CR
Refreshed Stock Heads w/ Kelford 62lb Springs
ID1050x Injectors
ECUtek W/ Racerom
VEMS Wideband Gauge





Drivetrain -

Southbend Stage 3 Daily Clutch

Fidanza Lightweight Flywheel
Velox Carbon fiber Driveshaft
STI Transmission Mount
Torque Solutions Engine Mounts





Suspension/Wheels/Brakes -

Apex ARC-8 17x9
Nitto NT555R 245/45
Stock 2017 Subaru BRZ Performance Pack Sachs Struts
Centric Blank Rotors
TRD Brake Pads

Eibach Pro-Kit Springs
STI Strut Mounts
Whiteline Front Endlinks
Whiteline KDT925 Differential Outrigger Inserts
Whiteline KDT922 Subframe Bushings
Energy Suspension Swaybar Bushings
MTEC Transmission Shifter Detent Springs




Turbo/Exhaust-
JDL Front Mount Intercooler
Turbosmart Raceport BOV

JDL EL T3 Manifold W/ External Turbosmart UltraGate 38mm Wastegate (open dump)
Boostlab BL5858 Turbo
JDL 3" Downpipe
JDL 2.5" Overpipe / Dual Resonated Frontpipe
FT86SpeedFactory x Remark 3" Quad Tip Catback Exhaust




Other Misc-


Radium Engineering PCV Oil Catch Can VTA
Radium Engineering Fuel Rail
Verus DI ECU Bracket
ATI Vent Gauge Pod

A/C Delete
Mishimoto Slim Shroud w/ 1150CFM Fans
Custom Suede Wrapped Center Console

eBay Center Armrest
JDM Black traction Control Buttons
JDM Black Shifter Trim and Radio Bezel
JDM Knee Pads

2017+ One Piece Dash Bezel
Tomei Duracon Shift Knob

[Joveen]

Originally Posted by DarkPira7e

Well, I made a decision to end my suffering. I'm ditching the CXracing manifold and bought the JDL EL manifold/downpipe setup. Not recirculating the wastegate dump back into the exhaust, if I need to be quiet I will just stay out of boost.

Wow!!! Dang son. Did you buy the 3" option?

Sent from my SM-N960U using Tapatalk

[DarkPira7e]

Originally Posted by Joveen

Wow!!! Dang son. Did you buy the 3" option?

Sent from my SM-N960U using Tapatalk

I did! But my overpipe and frontpipe are still 2.5". Being EWG, I don't think the flow really be affected

[DarkPira7e]

Engine is here!! No plans to install yet, just getting all the pieces together

[elitegunslinger]

Did that motor come with the build clearances?

[DarkPira7e]

Originally Posted by elitegunslinger

Did that motor come with the build clearances?

I haven't opened the box. If it's something you need real bad I can open to see

[elitegunslinger]

Originally Posted by DarkPira7e

I haven't opened the box. If it's something you need real bad I can open to see

Don't need it real bad, it can wait; just interested to see the stage differences if there are any in their clearances.

Pumped to see your build come together.

[HaXx]

Originally Posted by DarkPira7e

Engine is here!! No plans to install yet, just getting all the pieces together

My heavens, what have I been missing, ur building an iag block from the ground up? Wheres it being built??

[DarkPira7e]

Originally Posted by HaXx

My heavens, what have I been missing, ur building an iag block from the ground up? Wheres it being built??

Hah no, IAG provided and assembled, I just gave them $, I am not an engine builder.

"Getting all the pieces" means for the build in general