follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Issues | Warranty | Recalls / TSB

Issues | Warranty | Recalls / TSB Problems, issues, recalls, TSBs


User Tag List

Reply
 
Thread Tools Search this Thread
Old 04-07-2023, 02:40 PM   #57
Clipdat
Proud of BOXER
 
Clipdat's Avatar
 
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by tomm.brz View Post
usually if a oring is missing it just makes the loud pop on quick blips at any rpm, anyway if in doubt just have someone blip on ur car while you are in the front with bay opened, it s pretty obvious if a loud pop comes from the heads
i ve seen videos even with a small cloud of vaporized fuel fuming out of the injectors some years ago
Sounds like we need a video from @Nfsundrgrnd with the hood open. I'm not 100% convinced it's DI seals yet, but the knock sound and the low adv. multiplier are certainly concerning.

"quick blips at any rpm" - that's the weird thing about this is that I can rev from 1k to 2,500 or 3,000 over and over and no pop/clunk/knock/whatever. It only does it when it's at the resting ~650rpm idle. Even if I feather slightly to get over the resting idle and then do a throttle stab, no weird noise.
__________________

Quote:
Originally Posted by humfrz
I'm old and lazy

Last edited by Clipdat; 04-07-2023 at 05:15 PM.
Clipdat is offline   Reply With Quote
Old 04-07-2023, 02:43 PM   #58
Clipdat
Proud of BOXER
 
Clipdat's Avatar
 
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by fredzy View Post
My 23 makes more or less this same sound doing the same thing. Piston rattle knock/clacky sound. Did it off the lot.
Maybe make a video as well and we can compare noises? I'll do one this weekend and datalogging if I have time.
__________________

Quote:
Originally Posted by humfrz
I'm old and lazy
Clipdat is offline   Reply With Quote
The Following User Says Thank You to Clipdat For This Useful Post:
tomm.brz (04-07-2023)
Old 04-07-2023, 03:13 PM   #59
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,191
Thanks: 18,232
Thanked 16,358 Times in 7,398 Posts
Mentioned: 108 Post(s)
Tagged: 0 Thread(s)
Garage
@tomm.brz can the poor transient ignition timings cause this type of running issue even without blowing a seal?

I guess it is possible that @Clipdat has a seal in the process of failing and not completely gone and is only producing the issue at higher engine loads. Just throwing idea's out there.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
NoHaveMSG is online now   Reply With Quote
The Following User Says Thank You to NoHaveMSG For This Useful Post:
Clipdat (04-07-2023)
Old 04-07-2023, 03:40 PM   #60
DarkPira7e
Rust bucket enthusiast
 
DarkPira7e's Avatar
 
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 3,942
Thanks: 3,205
Thanked 4,101 Times in 2,049 Posts
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Curious if this has anything to do with the change made in the A01C / B01C map compared to A00C. There was a pretty strong change made in the transient ignition retard to address tip in knock.
__________________
Turbo FR-S Build - Build Thread
JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block
DarkPira7e is offline   Reply With Quote
The Following User Says Thank You to DarkPira7e For This Useful Post:
Ultramaroon (04-08-2023)
Old 04-07-2023, 04:58 PM   #61
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,203
Thanks: 502
Thanked 1,069 Times in 777 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
yes that s exactly the main change they did

From 2017 they changed it again and made it a lot more retarded, to the point that any restyling car has lagging throttle blips because of the huge retard
tomm.brz is offline   Reply With Quote
The Following User Says Thank You to tomm.brz For This Useful Post:
Ultramaroon (04-07-2023)
Old 04-07-2023, 05:04 PM   #62
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,203
Thanks: 502
Thanked 1,069 Times in 777 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by NoHaveMSG View Post
@tomm.brz can the poor transient ignition timings cause this type of running issue even without blowing a seal?

I guess it is possible that @Clipdat has a seal in the process of failing and not completely gone and is only producing the issue at higher engine loads. Just throwing idea's out there.
i dont know, the lack of retard in old stock tune just brings out some pre-ignition/knock/detonation/misfire immediately after a strong blip, per se it s not a huge deal, engine is not going to destroy for this and ecu can correct instantly a bit and limit damage.. anyway while NA is basically not going to do any harm
but
happens to casually destroy the oring of DI injectors, people learnt this the hard way and Subaru/toyota too so then they issued the bulletin explaining why Orings failed and released the update of the tune

I have no idea if it can be possibile to damage the oring only lightly that loose the seal only at higher rpm, or if the sound of knocking can be heard in the cabin while driving but i d doubt it
tomm.brz is offline   Reply With Quote
The Following 2 Users Say Thank You to tomm.brz For This Useful Post:
NoHaveMSG (04-07-2023), Ultramaroon (04-07-2023)
Old 04-07-2023, 06:17 PM   #63
Nfsundrgrnd
Member
 
Nfsundrgrnd's Avatar
 
Join Date: Feb 2021
Drives: 2013 WR blue sport tech BRZ
Location: NB
Posts: 83
Thanks: 22
Thanked 22 Times in 18 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by tomm.brz View Post
i dont know, the lack of retard in old stock tune just brings out some pre-ignition/knock/detonation/misfire immediately after a strong blip, per se it s not a huge deal, engine is not going to destroy for this and ecu can correct instantly a bit and limit damage.. anyway while NA is basically not going to do any harm
but
happens to casually destroy the oring of DI injectors, people learnt this the hard way and Subaru/toyota too so then they issued the bulletin explaining why Orings failed and released the update of the tune

I have no idea if it can be possibile to damage the oring only lightly that loose the seal only at higher rpm, or if the sound of knocking can be heard in the cabin while driving but i d doubt it
I could try to get a log tomorrow of casual and spirited driving to see if it's working well while under load. I would've expected more issues from a blown seal but maybe they're borderline bad. It's been doing this in my old and new shortblock.
Nfsundrgrnd is offline   Reply With Quote
Old 04-07-2023, 09:37 PM   #64
Ultramaroon
chicken tonight
 
Ultramaroon's Avatar
 
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,927
Thanks: 52,254
Thanked 36,589 Times in 18,966 Posts
Mentioned: 1108 Post(s)
Tagged: 9 Thread(s)
I've never heard the sound of a failed DI seal but I've always assumed that once it pops, it burns quickly and would be heard constantly. Am I wrong?
__________________
Ultramaroon is offline   Reply With Quote
Old 04-07-2023, 11:36 PM   #65
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,203
Thanks: 502
Thanked 1,069 Times in 777 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
well it misfires and loose compression the more damaged the seal is so it could throw some codes too(like too lean or misfiring) together with harsh sound during acceleration and popping sound like this:
tomm.brz is offline   Reply With Quote
The Following User Says Thank You to tomm.brz For This Useful Post:
Ultramaroon (04-08-2023)
Old 04-08-2023, 12:39 AM   #66
Ultramaroon
chicken tonight
 
Ultramaroon's Avatar
 
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,927
Thanks: 52,254
Thanked 36,589 Times in 18,966 Posts
Mentioned: 1108 Post(s)
Tagged: 9 Thread(s)
My google fu was weak. Thanks. Sounds exactly like the culprit here.


Guys, don't let this discourage you. It's a serious job but it doesn't involve tearing apart the engine.
__________________

Last edited by Ultramaroon; 04-08-2023 at 12:52 AM.
Ultramaroon is offline   Reply With Quote
Old 04-08-2023, 01:39 AM   #67
Clipdat
Proud of BOXER
 
Clipdat's Avatar
 
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
I just looked at the video Tomm posted. I don't identify that as the exact same sound, or reproduced at the same time during the rev stab as what need for speed and I are experiencing. Close, but no cigar. Also, if you notice in the video, he's not letting the revs fall back to the resting idle before revving again, and it still makes the noise. Not the case for us. More investigation is needed.

And if it DOES turn out to be DI seals, the only way I'm doing this job in my driveway is if I fly you down and we do it together lol.
__________________

Quote:
Originally Posted by humfrz
I'm old and lazy
Clipdat is offline   Reply With Quote
The Following User Says Thank You to Clipdat For This Useful Post:
Ultramaroon (04-08-2023)
Old 04-08-2023, 01:53 AM   #68
Clipdat
Proud of BOXER
 
Clipdat's Avatar
 
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
We need more open hood videos. It honestly sounds like it could be something belt tensioner related. Just an uneducated guess.

I mean I can rev it like crazy, from 1k to 4k or above. Zero popping/knocking or strange noises. Even let it fall from 4k to 3k and rev back to 4k over and over and over. Nothing.


Plus the fact that @fredzy's 23 does it is an interesting data point. Hopefully he can make a video for us when he has time.
__________________

Quote:
Originally Posted by humfrz
I'm old and lazy

Last edited by Clipdat; 04-08-2023 at 02:24 AM.
Clipdat is offline   Reply With Quote
Old 04-08-2023, 04:24 AM   #69
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,203
Thanks: 502
Thanked 1,069 Times in 777 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
well the video of loud popping surely relates to OP's car

for you we wait a video of yours
tomm.brz is offline   Reply With Quote
Old 04-08-2023, 09:43 AM   #70
Nfsundrgrnd
Member
 
Nfsundrgrnd's Avatar
 
Join Date: Feb 2021
Drives: 2013 WR blue sport tech BRZ
Location: NB
Posts: 83
Thanks: 22
Thanked 22 Times in 18 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by tomm.brz View Post
well the video of loud popping surely relates to OP's car

for you we wait a video of yours
Actually I agree with ClipDat, the only issue I have is with it resting at Idle, no other issues anywhere else in the RPMs. It sounds similar but I've never been able to replicate the noise other than at resting Idle. Gonna get a log in a bit of spirited driving for more data. I'd assume it would be noticeable in those logs if the injector is acting up.
Nfsundrgrnd is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rough idle leads to stall, runs well under load, no engine response on throttle blip gensch Issues | Warranty | Recalls / TSB 8 09-01-2021 08:26 AM
Abnormal noise when throttle blip or WOT shifting evo4g63 Issues | Warranty | Recalls / TSB 48 10-16-2014 08:42 AM
Throttle Blip Hiss Wepeel Issues | Warranty | Recalls / TSB 29 05-30-2014 11:56 PM
Metal Grind Sound when throttle blip JDM-dono Issues | Warranty | Recalls / TSB 0 11-17-2013 04:37 AM
Throttle Blip, and other features? ashtray BRZ First-Gen (2012+) -- General Topics 39 03-07-2012 10:52 AM


All times are GMT -4. The time now is 05:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.