|
Forced Induction Turbo, Supercharger, Methanol, Nitrous |
|
Thread Tools | Search this Thread |
08-30-2020, 01:10 AM | #1 |
Member
Join Date: Jun 2015
Drives: 2014 BRZ Limited
Location: Southern Maryland
Posts: 64
Thanks: 3
Thanked 12 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 2 Thread(s)
|
Inconsistent Acceleration w/ SBD 500x
Everyone:
I've been trying to iron out an issue with my car since my tune was completed with James (HRI). Car seems to stumble randomly at partial throttle with respect to acceleration. Doesn't always seem to happen. Feels like it's losing/gaining a significant amount of power in a ~500-1k rpm band right below when boost starts to build (~3-4k). Problem doesn't seem to be nearly as noticeable, if at all, when it's WOT or even moderately pressed on. Only during a normal, driving two minutes to a gas station, kind of gentle acceleration does it stumble. James says the tune looks fine based on my logs. Anyone have this issue? PTuning suggested my Primary O2 on the log file didn't look great, but I'm not educated enough on tuning to make a judgement for myself. I can e-mail tunes to anyone. The logs are too large for datazap. Thanks!
__________________
'14 BRZ Limited | SBD500X + HRI Tuning | Tanabe Concept G Exhaust | XXR 527 18x8.75 | Hankook Ventus V12 EVO2 245/40/18
|
08-30-2020, 01:14 AM | #2 |
Member
Join Date: Jun 2015
Drives: 2014 BRZ Limited
Location: Southern Maryland
Posts: 64
Thanks: 3
Thanked 12 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 2 Thread(s)
|
Worth noting: I've checked all of my piping, the BOV multiple times, all bolts and hoses. No leaks that I can find.
__________________
'14 BRZ Limited | SBD500X + HRI Tuning | Tanabe Concept G Exhaust | XXR 527 18x8.75 | Hankook Ventus V12 EVO2 245/40/18
|
08-30-2020, 01:18 AM | #3 |
Senior Member
Join Date: May 2017
Drives: Hot lava FRS Monogram Charizard
Location: Sacramento Ca
Posts: 329
Thanks: 22
Thanked 85 Times in 63 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
|
08-31-2020, 08:42 PM | #4 |
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,529
Thanks: 1,999
Thanked 2,013 Times in 1,457 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
Is that connection under the manifold clamped? I know these can pop up when boosted..
Sent from my GM1915 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
09-04-2020, 11:08 PM | #5 |
Software Hobbiest
Join Date: Aug 2019
Drives: 2015 FRS
Location: San Diego
Posts: 160
Thanks: 26
Thanked 19 Times in 15 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Im going to have to agree on maf scaling. If your on ecutek or maybe oft has speed density but when the engine is inside the maf range it could use the maf still. Tuning for the turbo would mainly focus on the speed density tables in order to make it safe but maybe the maf got skipped. If you want to check record a log and see if your LTFT (Long term fuel trim) + STFT(Short term fuel trim) are greater than a 5% value or less than a -5% value. If that is the case then your maf scaling is off.
If your on oft it might be all speed density and the stumble you feel might be temp. based. Speed density doesnt do well with variations in air density such as altitude or temp. If you say it happens after stopping at a gas station it might be heat soaking temp on your intake causing the issue. If thats the case than ECUTEK is probably the solution your looking for. If not then im out of ideas. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SBD 500x Turbo Kit | funkjaw | Engine, Exhaust, Bolt-Ons | 4 | 04-22-2020 08:39 PM |
SBD Turbo - 400x vs 500x | James Russels | Forced Induction | 29 | 07-23-2017 11:23 AM |
3rd gear inconsistent shifting | mike the snake | Issues | Warranty | Recalls / TSB | 30 | 11-22-2013 03:54 PM |
Inconsistent gear box? | wootwoot | Engine, Exhaust, Transmission | 12 | 10-07-2013 02:15 PM |