WHAT DID YOU DO TO YOUR BRZ TODAY?

[go_a_way1]

Originally Posted by Choco

Added more rigidity to chassis!

Thank you @Apeks and @1GiantTurtle for the help and tools, also @thien for the tool box and those salty cookies.

I have those on order! They look nice. How was the install??

[Choco]

Originally Posted by go_a_way1

I have those on order! They look nice. How was the install??

The OEM screws on the chassis are on SUPER tight(this was the toughest part), it's pretty simple with proper tools, and even more easy with someone helping you hold the stabilizer in place while you put the new screws in.

[go_a_way1]

Originally Posted by Choco

The OEM screws on the chassis are on SUPER tight(this was the toughest part), it's pretty simple with proper tools, and even more easy with someone helping you hold the stabilizer in place while you put the new screws in.

Can I get away with a breaker bar?? Or should I use an impact gun?? I rather not set up the compressor as its in storage haha.

[BRZtoni]

Originally Posted by iarefluffy

Just finished installing my trunk with the tommy kaira wing and their 4th piece lip thing... @BRZtoni i did it buddy.





side note, never install a trunk by yourself. SHIT IS SO HARD. took me a good 2 and a half hours.

true baller, i cant wait to see your car in person

CF mid section is always nice. i dont hav carbon parts thus no need for the extra baller $$$$

[byun]

Whiteline rear subframe inserts and diff inserts and kartboy short shifter and shifter bushing. Much more noise!


Sent from my iPhone using Tapatalk

[B-R-Z]

Originally Posted by Teseo

Wheel info. Thanks

XXR 527 in matte bronze. Be warned, this paint color is known to peel as it did on mine. I had mine powder coated matte bronze after the peeling started.

These are 18x8.75

Original paint starting to peel. Each wheel had this, and none of them were exposed to any chemicals or anything like that. XXR offered to inspect for replacement at my expense of dismounting the tires and paying for shipping. The wheels cost about $600 IIRC shipped so I just decided to have them powder coated. :


Powder coated:

[Choco]

Originally Posted by go_a_way1

Can I get away with a breaker bar?? Or should I use an impact gun?? I rather not set up the compressor as its in storage haha.

You can if you're strong enough.

[Luftwaffel]

Cusco 20mm front, 16mm rear stabilizer bars. Took about 45 minutes front, 20 rear. The front assembly is a little more complicated and needs the under tray removed.

[KR-S]

Looking at all these mods makes me jerry.

[1GiantTurtle]

Originally Posted by go_a_way1

Can I get away with a breaker bar?? Or should I use an impact gun?? I rather not set up the compressor as its in storage haha.

I used a power drill that had a impact feature to take it off, hold the drill firmly on the screw and slowing unscrew and try not to strip the screw,

[BRZtoni]

[iarefluffy]

@BRZtoni you painted it all blue?

Sent from brick

[spicyricecake]

Originally Posted by kberkel

I'd have to find a good color match, so not sure yet, but maybe in the future.

I think I am switching to a better material too.. just waiting on samples. I'll let you know.

perfect sounds good!

[BRZtoni]

Originally Posted by iarefluffy

@BRZtoni you painted it all blue?

Sent from brick

Yeah I decided since my roof not black yet if anything I can repaint haha or wrap