WHAT DID YOU DO TO YOUR FRS TODAY?

[JonAvalon]

Originally Posted by wdninja

What's the installation process like on the side skirts? Drill? Tape?

Thanks.

Drill and i added tape for extra security. To be honest i'm not even sure if i did it right. Or if any one has tips on how you installed your side skirts i'd like to know. My left side skirt is half-assed installed, i didn't drill two of the holes but it's holding ok enough for now until i can get it done. The right side is on pretty good, all holes drilled into it.

I'm not big into drilling into a relatively new car. There was no instructions included so i basically went off the HT Autos install on Koru's blog. Problem is the hardware is different so i had to wing it with the drilling. It includes 4 bolts with nuts and a bunch of small screws. My question is how do i attach the nut to the bolt? unlike the front bumper you can't exactly get inside to screw it on or put the bolt inside or am i just overlooking it?

I will probably have to run by the hardware store to get better screws to keep things secured.

[skidmark86]

,

[*LongFella]

Just doing a little bit of work...

[Midarete]

New Beat Sonic Shark Fin!

[mrharry]

Just test fitted my spacers today and just wondering if i rolled these guard would i scrub?

[t.chk]

Originally Posted by mrharry

Just test fitted my spacers today and just wondering if i rolled these guard would i scrub?

Don't know if serious? Assuming you are serious, you probably would not rub if going in a straight line with fenders rolled...but if you turned the wheel and the car leaned for a turn you would probably rub a bit/lot. Maybe add a little camber?

Not enough tuck if you ask me but it seems a lot of people want hellaflush or a lot of poke.

[Squishy86]

Originally Posted by mrharry

Just test fitted my spacers today and just wondering if i rolled these guard would i scrub?

I was about to freak out and wonder how the hell you got those wheels then I realized you're in Australia and Regamasters are relatively easy to come by there. More pics and specs please. You tease so well.

EDIT: Nvm. Stalked your profile and found it. Those look amazing!

[maxfun]

I did my toyota flip key today. Bought it from Ebay 2 weeks ago. Paid less then 20$ including shipping (Canada) and professionnel key cutting.

First tought, feels a bit cheap in hand but looks good and very small in pockets.

It took me around 20 mins to get the chip out of the shell of my original key. I used a heat gun and it went pretty well. You can view a video youtube of the installation you need to make ( [ame="http://www.youtube.com/watch?v=KlmjV7oRvlA"]Toyota Flip Key - www.duplicatekeys.in - YouTube[/ame] ) I did the same but I didn't use the valet key for the chip.

Final thought, worth the 20$ invested!

[Vincenttam]

Installed a drop in k&n. Now it sounds like an airplane at 4k+ rpm. Wanna do an exhaust next but no ones selling

[*LongFella]

Finished her up! Need to install the driveshaft, but she idles nice...no codes, no leaks, oil cooler is awesome...

[mush]

got the wheels on friday

[marky]

Originally Posted by mush

got the wheels on friday

Toms lights are so dope.. clean style.. have it too..

[N1rve]

Originally Posted by Vincenttam

Installed a drop in k&n. Now it sounds like an airplane at 4k+ rpm. Wanna do an exhaust next but no ones selling

Do a berk muffler delete LOLOL

[mush]

Originally Posted by Vincenttam

Installed a drop in k&n. Now it sounds like an airplane at 4k+ rpm. Wanna do an exhaust next but no ones selling

are u talkin about the high pitch sound?