FA20Club Turbo Kit Owners Topic

[King Tut]

Originally Posted by lbroskee

bc the intercooler outlet. if it was designed with a reg 2 side outlet it wud require a washer bottle delete

I have a reg 2 side outlet and a factory washer bottle, so do the AVO kits.

[King Tut]

Originally Posted by Frs300

i would run a remote washer bottle before i cut crash beam

Is your kit running a different piping route than the other FA20Club kits?

[lbroskee]

Originally Posted by King Tut

I have a reg 2 side outlet and a factory washer bottle, so do the AVO kits.

My bad i was thinking intake. Now I'm curious y this weird IC LOL

[Sportsguy83]

Originally Posted by lbroskee

My bad i was thinking intake. Now I'm curious y this weird IC LOL

Making the pipe run as short as possible.

[King Tut]

Originally Posted by Sportsguy83

Making the pipe run as short as possible.

Yep. I have to say that I do admire the shorter piping routing of the kits that run the outlet of the turbo over the top of the radiator versus going through the headlight areas.

[lbroskee]

Originally Posted by King Tut

Yep. I have to say that I do admire the shorter piping routing of the kits that run the outlet of the turbo over the top of the radiator versus going through the headlight areas.

Tru. Jus boils down to radiator compatibility after that

[Frs300]

Originally Posted by King Tut

Is your kit running a different piping route than the other FA20Club kits?

Not sure about routing but I know its different sizes due to inlet/outlet being different on the 6266. On the ic pics toni threw up in the thread there was only one inlet/outlet on the ic itself if i remember correctly. So I don't know if its same routing

[sid3way5]

Hmm ok the guys at mr performance are installing my kit now they said they have to make their own piping bc toni told them to cut the hid box so the ic pipes would fit but they don't want to do that

[bgibbsunc]

Originally Posted by sid3way5

Hmm ok the guys at mr performance are installing my kit now they said they have to make their own piping bc toni told them to cut the hid box so the ic pipes would fit but they don't want to do that

Thats when you say well Ill be taking it somewhere else to be installed. lol
Its really not as serious as it looks. its a 4-6 inch notch out. Me personally I like it because the piping from the turbo to the IC is literally maybe a foot. Only thing i wish is that the filter location could be different, but there really isnt a lot of room. Im going to try and get mine down in front of the wiper fluid and run the fog light cut out that APR makes.

[sid3way5]

My kit should be the standard ic piping with the fa20 kits I didn't request special piping

[sid3way5]

Lol to late to take it some where else its almost complete now

[bgibbsunc]

Originally Posted by sid3way5

Lol to late to take it some where else its almost complete now

So how the hell are they mounting the IC? Or are they using a different IC? Only thing I can think is mount it lower but depending on your suspension that would be way too low.

[sid3way5]

they want to make their own ic pipes

[bgibbsunc]

Originally Posted by sid3way5

they want to make their own ic pipes

I understand that but don't really see how they are going to make piping that works with that front mount. It can only really mount under the crash bar. Well post pics when its done.