The Gen 2 Exhaust Thread - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sport-Tech · 01-03-2022, 06:47 AM

Quote:

Originally Posted by Fingat

I did some in-cockpits today, had some issues getting the phone in a good spot.

Like I said Ill have a full edited video soon.

Thanks - is that with any other mods in addition to the exhaust? Sounds like there may be UEL headers present....

SA2K12 · 01-03-2022, 09:31 AM

Here's mine with the Borla S-Type Cat-back.

AK2112 · 01-03-2022, 12:02 PM

Quote:

Originally Posted by SA2K12

Here's mine with the Borla S-Type Cat-back.

Would definitely like to hear more. Sounds promising.

Simmons · 01-03-2022, 09:28 PM

OK all of the stock exhaust is replaced.
JDL UEL, PLM over pipe, PLM front with HFC, Perrin 2.5" cat back.

In car video

SpectreRT · 01-03-2022, 09:33 PM

Quote:

Originally Posted by Simmons

OK all of the stock exhaust is replaced.
JDL UEL, PLM over pipe, PLM front with HFC, Perrin 2.5" cat back.

Did you weigh all the stock items that were removed? I dont think I've seen metrics on how much the OEM stuff weighs.

BTW, your set up looks great.

Simmons · 01-03-2022, 09:39 PM

Yes I added all of it to the 2nd gen weight thread in the Autox section. I will weigh the stock manifold tomorrow. The PLM over and front saved me 6lbs

joemysterio · 01-03-2022, 09:56 PM

In car sounded great! Can you do a cold start and a few revs after when you can?

Simmons · 01-03-2022, 10:31 PM

Quote:

Originally Posted by joemysterio

In car sounded great! Can you do a cold start and a few revs after when you can?

No cold start video yet, but damn it's crazy

Fingat · 01-04-2022, 04:21 AM

Quote:

Originally Posted by Sport-Tech

Thanks - is that with any other mods in addition to the exhaust? Sounds like there may be UEL headers present....

Only the catback, everything else is stock.

Chris_f · 01-04-2022, 04:58 AM

Quote:

Originally Posted by Fingat

Only the catback, everything else is stock.

So sounds like the 2.4L has a bit more of that rumble sound with the stock header than the old 2.0L

Sport-Tech · 01-04-2022, 08:08 PM

Quote:

Originally Posted by Fingat

Only the catback, everything else is stock.

Impressive power for only a catback, had my chair vibrating when I watched it through my A/V setup.

It will be interesting to see if there is much drone at highway cruising speeds.

OkieSnuffBox · 01-07-2022, 03:13 PM

Quote:

Originally Posted by Sport-Tech

Impressive power for only a catback, had my chair vibrating when I watched it through my A/V setup.

It will be interesting to see if there is much drone at highway cruising speeds.

The SP didn't drone on my first Gen, but the rest of the exhaust was stock as well.

Clott · 01-07-2022, 03:17 PM

Quote:

Originally Posted by Panda Grahams

I didn't know if this fit and have been looking at the MXP Comp RS. I had the N1 on my first gen. I may have to get it again.

side note Panda: where did you get your profile photo? I'd love that as my phone wallpaper lol.

Panda Grahams · 01-08-2022, 01:52 AM

Quote:

Originally Posted by Clott

I didn't know if this fit and have been looking at the MXP Comp RS. I had the N1 on my first gen. I may have to get it again.

side note Panda: where did you get your profile photo? I'd love that as my phone wallpaper lol.

Here ya go!

Name: image0.jpg
Views: 805
Size: 259.6 KB

01-03-2022, 09:28 PM	#130
Simmons Senior Member Join Date: Jun 2012 Drives: 2022 BRZ Location: PA Posts: 957 Thanks: 300 Thanked 570 Times in 266 Posts Mentioned: 17 Post(s) Tagged: 0 Thread(s)	OK all of the stock exhaust is replaced. JDL UEL, PLM over pipe, PLM front with HFC, Perrin 2.5" cat back. In car video Attached Images __________________ 2022 BRZ 71 STR Sponsors Xero-Limit//Karcepts

01-03-2022, 09:39 PM	#132
Simmons Senior Member Join Date: Jun 2012 Drives: 2022 BRZ Location: PA Posts: 957 Thanks: 300 Thanked 570 Times in 266 Posts Mentioned: 17 Post(s) Tagged: 0 Thread(s)	Yes I added all of it to the 2nd gen weight thread in the Autox section. I will weigh the stock manifold tomorrow. The PLM over and front saved me 6lbs __________________ 2022 BRZ 71 STR Sponsors Xero-Limit//Karcepts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FR-S and BRZ Exhaust Compilation Thread	Spd229	Engine, Exhaust, Transmission	660	01-03-2024 10:10 AM
2022+ Exhaust compilation thread	Yoshoobaroo	Engine, Exhaust, Transmission	22	04-22-2022 06:17 AM
The Boosted Exhaust Thread	The Racers Line	Forced Induction	49	06-05-2014 01:13 AM
The Exhaust Weights thread	qoncept	Engine, Exhaust, Transmission	5	06-12-2013 02:34 PM
Agency Power Exhaust Thread PT II	vividracing	Engine, Exhaust, Transmission	222	07-28-2012 12:52 AM

01-03-2022, 09:31 AM	#128
SA2K12 Junior Member Join Date: Jul 2016 Drives: 2022 ISM BRZ Limited Location: TX Posts: 1 Thanks: 0 Thanked 7 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here's mine with the Borla S-Type Cat-back.

01-03-2022, 09:56 PM	#133
joemysterio Senior Member Join Date: Dec 2021 Drives: Mini Location: Hayward Posts: 136 Thanks: 98 Thanked 51 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	In car sounded great! Can you do a cold start and a few revs after when you can?

User Name		Remember Me?
Password