|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
09-30-2013, 07:33 PM | #1 |
Senior Member
Join Date: Mar 2013
Drives: Whiteout FRS
Location: South, Ga
Posts: 348
Thanks: 19
Thanked 144 Times in 80 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Help?!? Maybe..Ecutek tune
So I am not sure if I should be worried or not, but when i go from around 3-4500 there is a hard rattle like metal on metal. 2 things happened the day it started got tuned and 7500 oil change @ Toyota. Now my first thought was retards left something loose well I checked and everything was good took it all off and drove but it's still there. I thought "no way it could be the tune" so i flashed to stock and its gone...or at least 90 percent gone. Only mod I have is an fa20club intake. Anyone seen this before?
|
09-30-2013, 07:35 PM | #2 |
Senior Member
Join Date: Aug 2012
Drives: 2013 WRB BRZ Limited
Location: Dublin, OH
Posts: 349
Thanks: 215
Thanked 147 Times in 97 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Who did you get a tune through? Logs taken while it's happening? Sound like something hitting the frame, or something else?
|
09-30-2013, 07:37 PM | #3 |
Senior Member
Join Date: Mar 2013
Drives: Whiteout FRS
Location: South, Ga
Posts: 348
Thanks: 19
Thanked 144 Times in 80 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Sounds like something hitting the frame. Checked the intake that was my first thought took it off and checked and there were no rub marks or anything were it could hit. Gonna take the heat shield off the stock header next i think...fa20club tune and logs were sent in while it was doing that..and i should tell tony now that it goes away mostly with the stock tune
|
09-30-2013, 07:45 PM | #4 |
Senior Member
Join Date: Aug 2012
Drives: 2013 WRB BRZ Limited
Location: Dublin, OH
Posts: 349
Thanks: 215
Thanked 147 Times in 97 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
I know the first few tunes from Toni can be a little rough - definitely let him know and give him what you have so he can get back to you - since you have the stock file I'd flash back to that for the time being - I had to do the same thing with the first few revisions I got, just for safety's sake.
Just as a side note, I have had the metal on metal sound, but not with the stock header - started happening with my current setup until I adjusted - the overpipe runs very close to the cross member so if you get the car's engine to move enough they can touch, just an fyi. |
09-30-2013, 07:54 PM | #5 |
Senior Member
Join Date: Mar 2013
Drives: Whiteout FRS
Location: South, Ga
Posts: 348
Thanks: 19
Thanked 144 Times in 80 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Yeh I am gonna stay on the stock file for now. already sent the logs just waiting for the next update and I just sent an email updating tony with the problem I am having
|
09-30-2013, 08:06 PM | #6 |
Senior Member
Join Date: Mar 2013
Drives: Whiteout FRS
Location: South, Ga
Posts: 348
Thanks: 19
Thanked 144 Times in 80 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
I think I found...there is part of the heat shield near the overpipe and i can move it with ease(up down left right and a clamping motion). Still don't know why its more noticeble with the tune tho...
Here is a pic of the part i am talking about Last edited by JerryMichaels7; 09-30-2013 at 08:35 PM. |
09-30-2013, 11:47 PM | #7 | |
Senior Member
Join Date: Oct 2012
Drives: 2013 Raven FRS
Location: Virginia Beach, Va
Posts: 496
Thanks: 30
Thanked 143 Times in 93 Posts
Mentioned: 18 Post(s)
Tagged: 3 Thread(s)
|
it's more noticeable with tune due to engine harmonics being changed at that given RPM with Toni's tune. I had the same thing happen in the same RPM range. I stuck some black foam tape stuff to my aluminum underpanel, thinking that was what was rattling, and it is completely gone now. Though that could really just be from taking it off, and putting it back on, made it shift slightly so that it wouldn't touch the heat shield anymore.
__________________
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does anybody know if the tune from the vortech is better than the ecutek? | Frsexxxy | Forced Induction | 16 | 04-08-2013 11:53 AM |
WTB: Ecutek Tune Bay area | hyperpunx | Engine, Exhaust, Bolt-Ons | 0 | 04-02-2013 11:38 AM |
Ecutek visconti tune | ft86me | Engine, Exhaust, Transmission | 24 | 03-14-2013 10:35 AM |
Ecutek Tune From Visconti | tonytduc | Engine, Exhaust, Transmission | 3 | 03-13-2013 08:28 PM |
FA20CLUB.COM ECUTEK TUNE | hayleybeaners | Engine, Exhaust, Transmission | 21 | 11-13-2012 09:52 AM |