06-09-2019, 05:07 PM | #1 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
KW V3, WL FSB, Velux camber plates, more
ALL PARTS ARE SOLD.
KW V3 dampers. These outstanding, German engineered, dual tube dampers are available at a reasonably priced premium of $500 shipped (lower 48). All four dampers in the set are in good working condition. All adjusters work properly and adjustments can be felt. There are no leaks or damage. As is expected with KW’s, 2 or 3 of the set screws have stripped the plastic collar at some point or another. I have never had a perch migrate though so I have never bothered fixing them. This particular set have gloriously damped suspension motion on moving automobiles for total distances of approximately 35,000 miles which is a high estimate because I can’t tell you for sure. I do not believe that they have ever been rebuilt. They have had an easy life because they’ve been used with those enormous bump stops which take up all the travel so they’ve done pretty much nothing. Included, for your shock absorbing pleasure, with these fine automotive compliments are the upper spring perches for the front, spring centering rings to allow use with O.E. top hats in the rear, original bump stops for all four corners, lower perches of course, two original KW helper springs with couplers, and that’s it. I will include a set of springs for an additional $60. $560 gets you the V3's with a pair of 250 lb springs and a pair of 275 lb springs, shipped. No I do not have the original springs. I am located in Virginia, about an hour east of Richmond for pick ups. Brand new never used Velox camber plates. I bought these just recently and decided not to use them. One has never been out of the bubble wrap that it was shipped in. Original hardware and sticker included. I mounted one up to take measurements but there is no damage or wear at all. These go for $330 with free shipping. I’ll take $275 shipped for these. SALE PENDING Package deal: I will sell the KWs, both pairs of springs mentioned, and the Velox plates all together for a total $1125 shipped lower 48. That's as good as that deal is going to get though because I still have to take shipping and the PayPal fee out of that. NLA Whiteline rear swaybar endlinks. $45 shipped. One nut is missing. SOLD Whiteline front swaybar. Two adjustment settings. I’ll take $140 shipped at this point. Not available at a reduced price as a package deal with the KWs because it would still need to be shipped separately. I cannot promise fast shipping on this because I do not have a box for it so it may take a few days to find something. SALE PENDING Last edited by CoolHandMoss; 07-18-2019 at 02:58 PM. |
06-11-2019, 11:04 AM | #2 | |
Member
Join Date: Nov 2018
Drives: 86
Location: ELA
Posts: 61
Thanks: 9
Thanked 6 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Laziness at its best.. "One nut is missing" ...just replace the nut at your hardware store and have a complete item for sale.
__________________
2014 FRS-RIP 10/2020
2021 Prius 2015 RCF 2004 350Z Stillen SC Stage 3 |
|
06-11-2019, 12:03 PM | #3 |
Senior Member
Join Date: Jul 2013
Drives: 2013 FR-S Argento
Location: Westport,CT
Posts: 1,855
Thanks: 517
Thanked 1,039 Times in 616 Posts
Mentioned: 7 Post(s)
Tagged: 1 Thread(s)
|
Package deal: I will sell the KWs, both pairs of springs mentioned, and the Velox plates all together for a total $1125 shipped lower 48.
Smoking deal, someone take these. |
06-11-2019, 02:19 PM | #4 |
Member
Join Date: Dec 2018
Drives: 2015 BRZ
Location: Eugene Oregon
Posts: 52
Thanks: 10
Thanked 8 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
He priced them pretty well considering the buyer could just go to a local hardware store and pick up a nut for less than a dollar. Haha
|
06-11-2019, 02:30 PM | #5 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Yet everyone wants to low ball me on those lol.
How's this for lazy. If no one gives me $45 for them soon they just go in the trash where the worthless things belong. I'm hesitant to sell them at all with or without hardware. Likely the worst end-links available. |
06-12-2019, 02:07 PM | #6 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I also have a Whiteline rear sway bar that I could let go of with the front. That could make for a good package deal if anyone is interested.
|
06-12-2019, 02:20 PM | #7 | |
Senior Member
Join Date: Jun 2018
Drives: frs
Location: arlingtong va
Posts: 184
Thanks: 33
Thanked 41 Times in 28 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
06-14-2019, 12:51 PM | #8 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I'm a long 2.5 hours from Arlington, but if you insist!
|
06-16-2019, 02:10 PM | #9 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Still have all of this. I'd drop the price but I don't think I can go any lower!
|
06-22-2019, 08:05 AM | #10 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Not a bump but... I suddenly have an controllable impulse to post in this thread.
|
06-28-2019, 09:23 PM | #11 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
$265 shipped for the Velox camber plates. $1100 shipped for the KWs, camber plates, and springs all together.
|
07-04-2019, 03:25 PM | #12 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Alright. Springs are now included with dampers for free. That is the pair of brand new in plastic 250 lb springs and the pair of 275's. Dampers with springs can be had for $750 shipped. A full set of dampers is not cheap to ship so that's really letting them go cheap.
$950 shipped for the dampers, springs and camber plates. This stuff is taking up too much room in my garage and I have more things to buy. $250 shipped for just the camber plates. Front and rear Whiteline sway bars including rear end links $220 shipped. It appears obvious that people are worried about the miles on these dampers. I live in a rural area where going to the grocery store is a 30 mile round trip on smooth roads. A very good portion of the miles on them have been on very smooth roads where the dampers aren't really doing anything. And as stated in the description, they have always been used with the very large bump stops which means they weren't traveling much even in bumpy conditions. Miles can be deceiving. These have had an easy life. I would not hesitate to keep running these if I hadn't found a good deal on a set of monotubes that I couldn't live without. They have no leaks, and they work as well as they ever have. Not to mention, 35k isn't really that many miles for a set of good dampers anyway. Just some data for consideration. Last edited by CoolHandMoss; 07-04-2019 at 03:40 PM. |
07-10-2019, 04:44 PM | #13 |
Senior Member
Join Date: Jan 2018
Drives: 2013 FRS
Location: VA
Posts: 305
Thanks: 1
Thanked 86 Times in 55 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Endlinks sold. Everything else is still available. See above post for reduced pricing.
|
07-10-2019, 10:30 PM | #14 |
Junior Member
Join Date: Jul 2012
Drives: '98 Impreza JDM STI v8 conversion
Location: San Ramon, CA
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Are the camber plates still availble?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Uneven camber with the camber plates maxed. | fr-steezz | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 37 | 09-27-2022 09:15 AM |
Camber bolts and camber plates? | fatoni | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 6 | 12-14-2018 05:36 AM |
KW coilovers and camber (without camber plates) | wparsons | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 16 | 07-09-2018 08:53 PM |
FS: HVT Non-raising camber plates & WL camber bolts | trippinbillies40 | Brakes, Suspension, Chassis | 1 | 05-16-2015 09:00 PM |
Question about adjustable LCA's vs Camber Plates vs Camber Bolts | djdnz | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 13 | 03-27-2013 11:38 PM |