ABS + Traction Light After Fog Install - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Wyattkb · 03-22-2015, 05:21 PM

So i just got done installing my fog lights into my FRS. After I got done, took it for a spin and the ABS + Traction control light came on after I exceeded 15 MPH. It goes off after I restart the car, but then comes back once I exceed 15 MPH again.

The only thing I can think of that may be causing this is somehow the wheel did not go back on straight (since I installed a new stalk). When driving straight the 12 o clock position of the wheel is at the 10 o clock position. Could this be causing the issue?

I am going to try and fix the steering wheel issue tonight. Just though I could pick some knowledgeable forum members brains in the mean time.

Thanks

Wyattkb · 03-22-2015, 05:47 PM

So I figured it out.

What I did was drive down a dead end street and let the wheel find dead center by itself, stopped took wheel off then put it back on straight. No more issues.

03-22-2015, 05:21 PM	#1
Wyattkb Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout FRS Location: United States Posts: 444 Thanks: 56 Thanked 159 Times in 87 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	ABS + Traction Light After Fog Install So i just got done installing my fog lights into my FRS. After I got done, took it for a spin and the ABS + Traction control light came on after I exceeded 15 MPH. It goes off after I restart the car, but then comes back once I exceed 15 MPH again. The only thing I can think of that may be causing this is somehow the wheel did not go back on straight (since I installed a new stalk). When driving straight the 12 o clock position of the wheel is at the 10 o clock position. Could this be causing the issue? I am going to try and fix the steering wheel issue tonight. Just though I could pick some knowledgeable forum members brains in the mean time. Thanks

03-22-2015, 05:47 PM	#2
Wyattkb Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout FRS Location: United States Posts: 444 Thanks: 56 Thanked 159 Times in 87 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	So I figured it out. What I did was drive down a dead end street and let the wheel find dead center by itself, stopped took wheel off then put it back on straight. No more issues. Last edited by Wyattkb; 03-23-2015 at 02:38 AM. Reason: Found Fix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
traction light, engine light = cam sprocket , ecu	nivek111070	Issues \| Warranty \| Recalls / TSB	27	03-13-2016 09:28 AM
Abs and Traction Light	nabil_frs	Issues \| Warranty \| Recalls / TSB	14	07-09-2015 09:39 AM
CEL and Traction Light came on today	myjobis2pimp	NY / NJ / CT / PA	9	10-05-2014 01:45 AM
Traction controll problem after steeing wheel install...	NickGTI32	Issues \| Warranty \| Recalls / TSB	9	10-01-2014 03:09 PM
CEL ABS and Traction Light	DieselxIndustry	Issues \| Warranty \| Recalls / TSB	3	01-31-2013 01:04 PM

User Name		Remember Me?
Password