|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
09-14-2017, 02:04 PM | #1 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Cracking Header
Hello All,
This is my first time posting but I've tried going through all the trends for help but have not found what I'm looking for. I have a supercharged BRZ and keep getting cracks in my header. First header was a Borla UEL which cracked once, I welded it and then cracked in another spot. I then cracked the stock header and then an Invidia header. I'm trying to find a better header that has a thicker gage wall, 304 or better stainless steel, TIG welded and back purged but its hard to find info on these headers without just buying and seeing the parts. Does anyone have recommendations on better headers or a way to prevent cracking? Side Note - I have added panels to protect my header from water but there is just as much airflow so the header can cool properly. I also have not used exhaust wrap. Any help would be greatly appreciated especially that I'm spending way too much on headers. |
09-14-2017, 02:16 PM | #2 |
Resident Gear Head
Join Date: Nov 2012
Drives: 2013 BRZ
Location: Ohio
Posts: 734
Thanks: 264
Thanked 914 Times in 339 Posts
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
|
This is what people get with inexpensive parts.
I am not mocking you BTW just stating a fact. Yes they are sub $700 headers but you have already had to buy 2 instead of 1 at the same cost I would recommend Tomei, JDL, ACE, Nameless they are a quality part
__________________
Subaru BRZ/FRS Facebook News and Tech Page
My FB Build page CLICK AND LIKE! Twitter and Instagram @misairubrz |
09-14-2017, 02:27 PM | #3 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,531
Thanks: 8,920
Thanked 14,177 Times in 6,835 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
How are your EGTs?
|
09-14-2017, 02:39 PM | #4 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
celek - Ill definately take a look at the brands you suggested.
CSG Mike - I have not tried measuring the temps. |
09-14-2017, 04:21 PM | #5 |
-
Join Date: Nov 2012
Drives: '13 FRS - STX
Location: SF Bay Area
Posts: 10,366
Thanks: 13,733
Thanked 9,480 Times in 4,999 Posts
Mentioned: 94 Post(s)
Tagged: 3 Thread(s)
|
Out of curiosity what are the engine mods?
Is it just a lot of track time because cracking three headers including OE is insane, even if you can blame the quality of the aftermarket headers, cracking the OE ones is rare but not unheard of if tracked and with FI. |
09-14-2017, 05:53 PM | #6 |
Senior Member
Join Date: Apr 2013
Drives: 2005 Toyota Camry
Location: 91745
Posts: 6,562
Thanks: 493
Thanked 6,093 Times in 3,029 Posts
Mentioned: 95 Post(s)
Tagged: 3 Thread(s)
|
Spend better money on a tune, then work on fixing any header problems.
|
09-14-2017, 06:19 PM | #7 |
Lowly Cartuber
Join Date: Jul 2016
Drives: 2016 BRZ, 2005 Honda S2000
Location: California
Posts: 904
Thanks: 41
Thanked 422 Times in 281 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
JDL are known for having thicker metal which incidentally makes it a tad quieter. Also what kind of supercharger are you using? I was Edelbrock supercharged and never had an issue for 6 months (before i took off the SC). my friend is JRSC boosted and he cracked his OEM header, but that was after a full year of track days
__________________
2016 Limited MT WR Blue BRZ | Delicious Flash n Go Tune | Delicious Flex Fuel Kit | Nameless 2.5" with 5" Mufflers | JDL UEL Headers | Bayson R Diffuser/Side Skirts | APR Front Splitter | VIS Racing GT Wing | ST Suspension Coilovers | Grammlights Rays 57CR 17x9 +38 | Sumitomo HTR Z iii 235/45/17 |
|
09-15-2017, 05:40 PM | #8 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Hello All,
Sorry I have been busy today and haven't been very responsive. Engine Mods have just been adding a Edelbrock E Force supercharger with the standard pulley. The tune was custom and done by P Tuning without flashing and was not cheap. I saw all the setting and charts and no issues there. I decided to buy a Tomei and a JDL to see which has better welds and material thickness. Thank you all for the help. Let me know if you have other suggestions to prevent cracking. Last edited by djghez; 09-15-2017 at 08:17 PM. |
09-15-2017, 05:50 PM | #9 |
Senior Member
Join Date: Jun 2014
Drives: frs
Location: Gunsai
Posts: 4,877
Thanks: 7,153
Thanked 2,922 Times in 1,769 Posts
Mentioned: 23 Post(s)
Tagged: 2 Thread(s)
|
When you say was not cheap sounds you was ripped of
|
09-15-2017, 05:55 PM | #10 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I have all the data from the tune so what should I see wrong that would cause header cracking? I'm asking so that if they screwed up I can go back and have it fixed.
|
09-15-2017, 06:12 PM | #11 |
LMGTFY
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,646 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
Would LOVE to hear how you "tuned" the car without flashing.
|
09-15-2017, 07:21 PM | #12 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Sorry should have said we didnt just flash a premade tune.
|
The Following User Says Thank You to djghez For This Useful Post: | x808drifter (09-16-2017) |
09-15-2017, 07:28 PM | #13 |
Lowly Cartuber
Join Date: Jul 2016
Drives: 2016 BRZ, 2005 Honda S2000
Location: California
Posts: 904
Thanks: 41
Thanked 422 Times in 281 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
Surprised you have a heating issue with the Edelbrock. that kit is known for its incredible heat managment. Methinks the tune might be the issue. While you might have been tuned for best performance...that . might have come at a cost
__________________
2016 Limited MT WR Blue BRZ | Delicious Flash n Go Tune | Delicious Flex Fuel Kit | Nameless 2.5" with 5" Mufflers | JDL UEL Headers | Bayson R Diffuser/Side Skirts | APR Front Splitter | VIS Racing GT Wing | ST Suspension Coilovers | Grammlights Rays 57CR 17x9 +38 | Sumitomo HTR Z iii 235/45/17 |
|
09-15-2017, 07:42 PM | #14 |
Junior Member
Join Date: Apr 2016
Drives: Subaru BRZ WRB
Location: Batimore
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
What's the best way to adjust the tune for lower exhaust temp? Running rich, lower compression?
|
|
|
Tags |
borla, crack, exhaust, header, invidia |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The cracking shounds | Tofu-86 | Engine, Exhaust, Transmission | 19 | 10-11-2016 07:25 PM |
Paint Stain/Cracking? | nimble | Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs) | 5 | 11-26-2015 12:13 AM |
Window seal cracking | ironsurfer129 | Scion FR-S / Toyota 86 GT86 General Forum | 9 | 11-29-2014 08:59 PM |
Paint Cracking? | Heero | Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs) | 46 | 01-29-2014 12:53 PM |
exhaust cracking and leaking | driver01 | Engine, Exhaust, Transmission | 80 | 09-17-2013 03:25 AM |