Open Flash Header Discussion - Page 42 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Cjymiller · 04-16-2015, 01:11 AM

Quote:

Originally Posted by cameronjones239

I have a greddy evo gt 3" catback...

I rode in a BRZ with an EVO3 catback and it droned soooo bad for me and was terribly loud. Although you may be satisfied with your noise level now, a header is going to make that setup really loud.

Robert@Openflash · 04-22-2015, 06:35 PM

Dear OpenFlash Customers,
We understand many of you have been waiting for quite some time for you header to show up. Due to the West Coast Port closure it has caused a major delay and headache for all of us. Good news is that our shipment of 25 has showed up. At the same time we have already prepped and shipped out all of the orders up until 4/1/2015. If you order after 4/1 your header shipment will be fulfill when the next shipment arrives. Right now the update is that we should get our next shipment some time next week. Everyone who ordered the header before 4/1 should have tracking either from UPS or USPS (international) orders. If you did not get tracking please email me at: sales@openflashperformance.com with your Full Name that was used to place the order and we will provide tracking for you. Those that ordered after 4/1 please be patient and we will fulfill your order as soon as the next shipment arrives. If you ordered the combo kit and would like to receive your tablet first please also email me at: sales@openflashperformance.com and I will make arrangement for your tablet to ship first. Again we want to apologize for the delay and thank you all for being so patient with us. If you have any questions please feel free to email us and we will get back to you.

Have a wonderful day, Cheers
Robert@Openflash

Fizz · 04-23-2015, 01:37 AM

@Robert@Openflash @Shiv@Openflash

I'm planning to fit an aftermarket wideband in the rear O2 location, but my concern is that the longer rear sensor bung on the header may affect the accuracy of the wideband sensor reading, since the tip of the sensor is away from the exhaust flowstream(??)

Does anyone know of issues with placing aftermarket sensors on the rear O2 location on this particular header? Or do you think it'll be close enough for the sensor to pick up an accurate read?

BBYZILA · 04-23-2015, 12:47 PM

@Robert@Openflash @Shiv@Openflash

If i were to purchase a OFH right now, today. When can I expect to receive it?

I would like to get a general idea of how long the wait will be before I pull the trigger.

Thanks guys.

Timmy_Jones · 04-23-2015, 01:14 PM

Quote:

Originally Posted by BBYZILA

@Robert@Openflash @Shiv@Openflash

If i were to purchase a OFH right now, today. When can I expect to receive it?

I would like to get a general idea of how long the wait will be before I pull the trigger.

Thanks guys.

Same
@Robert@Openflash @Shiv@Openflash

SCHN3LL · 04-23-2015, 03:32 PM

Quote:

Originally Posted by Timmy_Jones

Same
@Robert@Openflash @Shiv@Openflash

I'm interested as well. Would like to pull the trigger soon.

Thanks.

Robert@Openflash · 04-23-2015, 07:45 PM

@BBYZILA @Timmy_Jones @SCHN3LL

If you order today the soonest we will be able to deliver the header is around two weeks or so. We still have some headers on back order but we have one shipment coming in next week and another one the week after.

Cheers

Fizz · 04-26-2015, 12:31 PM

Has anyone wrapped this header with it already fitted? Was it difficult to get it wrapped tightly?

Planning to wrap it but don't want to go through the hassle of removing the header.

Teseo · 04-26-2015, 01:19 PM

Quote:

Originally Posted by Fizz

Has anyone wrapped this header with it already fitted? Was it difficult to get it wrapped tightly?

Planning to wrap it but don't want to go through the hassle of removing the header.

Do it right and once, remove it. Dont take shortcuts

Stealthy · 04-27-2015, 12:32 PM

[ame]http://youtu.be/3-l9bU2N2cw[/ame]

For anyone wondering what this header sounds like paired with the stromung axleback. Vids don't do it justice but it's real rumbly in person

nivek111070 · 04-27-2015, 03:05 PM

spend my money on OFT/OFH or deductible on gallbladder surgery; it's a close one

Porcupint · 04-27-2015, 03:25 PM

Quote:

Originally Posted by Fizz

Has anyone wrapped this header with it already fitted? Was it difficult to get it wrapped tightly?

Planning to wrap it but don't want to go through the hassle of removing the header.

Probably better off getting it properly coated for a street car. From what I've heard, the wraps can hold moisture and cause accelerated corrosion issues.

Struckbylitenin · 04-27-2015, 09:48 PM

Quote:

Originally Posted by nivek111070

spend my money on OFT/OFH or deductible on gallbladder surgery; it's a close one

payment plan on the surgery... they wont charge until after anyway!

in other words,

D_Thissen · 04-27-2015, 10:46 PM

Just planning my next few mods. I've narrowed down my header choice to OFH and Tomei. What are the main differences between the two? I'm planning a custom dyno tune as well.

Sorry if it's been covered.

Dan

04-27-2015, 10:46 PM	#588
D_Thissen Senior Member Join Date: Jan 2014 Drives: '13 Argento FR-S (Sold) Location: Ontario Posts: 2,126 Thanks: 3,209 Thanked 1,439 Times in 855 Posts Mentioned: 19 Post(s) Tagged: 2 Thread(s)	Just planning my next few mods. I've narrowed down my header choice to OFH and Tomei. What are the main differences between the two? I'm planning a custom dyno tune as well. Sorry if it's been covered. Dan __________________ My FR-S Build IG: dthissen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Flash Header - Sound and Performance Comparison	nlowell	Engine, Exhaust, Transmission	41	05-19-2014 06:29 PM
FS: Open Flash Header - SoCal Pickup	nlowell	Engine, Exhaust, Bolt-Ons	9	05-12-2014 06:29 PM
Open Flash Tablet	Andrew025	Engine, Exhaust, Bolt-Ons	3	04-26-2014 05:03 PM
Open Flash Header Catless Clip	Vmax911	Engine, Exhaust, Transmission	25	03-08-2014 06:51 AM
Open flash tablet.	cooldandani	Scion FR-S / Toyota 86 GT86 General Forum	1	02-22-2014 07:14 PM

04-22-2015, 06:35 PM	#576
Robert@Openflash Join Date: Sep 2013 Drives: C6 Z06 Location: SF Bay Area Posts: 132 Thanks: 160 Thanked 96 Times in 46 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Dear OpenFlash Customers, We understand many of you have been waiting for quite some time for you header to show up. Due to the West Coast Port closure it has caused a major delay and headache for all of us. Good news is that our shipment of 25 has showed up. At the same time we have already prepped and shipped out all of the orders up until 4/1/2015. If you order after 4/1 your header shipment will be fulfill when the next shipment arrives. Right now the update is that we should get our next shipment some time next week. Everyone who ordered the header before 4/1 should have tracking either from UPS or USPS (international) orders. If you did not get tracking please email me at: sales@openflashperformance.com with your Full Name that was used to place the order and we will provide tracking for you. Those that ordered after 4/1 please be patient and we will fulfill your order as soon as the next shipment arrives. If you ordered the combo kit and would like to receive your tablet first please also email me at: sales@openflashperformance.com and I will make arrangement for your tablet to ship first. Again we want to apologize for the delay and thank you all for being so patient with us. If you have any questions please feel free to email us and we will get back to you. Have a wonderful day, Cheers Robert@Openflash

04-23-2015, 01:37 AM	#577
Fizz Senior Addict Join Date: Jan 2013 Drives: 86 GT Location: Perth, Australia Posts: 1,217 Thanks: 249 Thanked 336 Times in 215 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	@Robert@Openflash @Shiv@Openflash I'm planning to fit an aftermarket wideband in the rear O2 location, but my concern is that the longer rear sensor bung on the header may affect the accuracy of the wideband sensor reading, since the tip of the sensor is away from the exhaust flowstream(??) Does anyone know of issues with placing aftermarket sensors on the rear O2 location on this particular header? Or do you think it'll be close enough for the sensor to pick up an accurate read?

04-23-2015, 12:47 PM	#578
BBYZILA Senior Member Join Date: Dec 2014 Drives: 2013 Firestorm FR-S Location: Michigan Posts: 103 Thanks: 50 Thanked 70 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	@Robert@Openflash @Shiv@Openflash If i were to purchase a OFH right now, today. When can I expect to receive it? I would like to get a general idea of how long the wait will be before I pull the trigger. Thanks guys.

04-23-2015, 07:45 PM	#581
Robert@Openflash Join Date: Sep 2013 Drives: C6 Z06 Location: SF Bay Area Posts: 132 Thanks: 160 Thanked 96 Times in 46 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	@BBYZILA @Timmy_Jones @SCHN3LL If you order today the soonest we will be able to deliver the header is around two weeks or so. We still have some headers on back order but we have one shipment coming in next week and another one the week after. Cheers

04-26-2015, 12:31 PM	#582
Fizz Senior Addict Join Date: Jan 2013 Drives: 86 GT Location: Perth, Australia Posts: 1,217 Thanks: 249 Thanked 336 Times in 215 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	Has anyone wrapped this header with it already fitted? Was it difficult to get it wrapped tightly? Planning to wrap it but don't want to go through the hassle of removing the header.

04-27-2015, 12:32 PM	#584
Stealthy Senior Member Join Date: Jun 2014 Drives: 2014 WRB Bravo Romeo Zulu Location: Canadia Posts: 107 Thanks: 62 Thanked 57 Times in 30 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	[ame]http://youtu.be/3-l9bU2N2cw[/ame] For anyone wondering what this header sounds like paired with the stromung axleback. Vids don't do it justice but it's real rumbly in person

04-27-2015, 03:05 PM	#585
nivek111070 Senior Member Join Date: May 2014 Drives: 2014 GB Scoobie BRZ Location: Fort Worth, TX Posts: 115 Thanks: 121 Thanked 37 Times in 29 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	spend my money on OFT/OFH or deductible on gallbladder surgery; it's a close one

User Name		Remember Me?
Password