Zeta Performance - 2013+ FR-S/BRZ/GT86 Carbon Fiber Headlight EyeLid Cover

[ZetaPerformance]

2013+ FR-S / BRZ / GT86 Carbon Fiber Headlight EyeLid Cover

We are here to present our Zeta Performance carbon fiber headlight eyelid cover. Easy installation with double-sided tape.









Please check out our thread in the marketplace for pricing!
http://www.ft86club.com/forums/showt...600#post749600

Any question, please contact us at any time,

[asphalt86_915]

Sick!

[cslntuee]

Is there a concave there (red cycle) or just the light reflection issue?
Thanks.

[PNW FRS]

Originally Posted by Asphalt~86

Judging by the other photos I would guess it is a lighting issue.

Better ask the vendor... from my experience, that looks like some sort of change in the curvature of the piece... the shape of the highlight seems to be following some sort curve. Hard to know for sure.. so as mentioned.. message the vendor.

[Asphalt~86]

Originally Posted by PNW FRS

Better ask the vendor... from my experience, that looks like some sort of change in the curvature of the piece... the shape of the highlight seems to be following some sort curve. Hard to know for sure.. so as mentioned.. message the vendor.

Agreed, it looks like a curvature.

[cslntuee]

Originally Posted by PNW FRS

Better ask the vendor... from my experience, that looks like some sort of change in the curvature of the piece... the shape of the highlight seems to be following some sort curve. Hard to know for sure.. so as mentioned.. message the vendor.

I am not sure about the FRS the head light (should be the same), but I check my BRZ head light. I do not think that I have this kind of curvature in the side of my head light.
I did plan to place to place the order, before I saw this. Modellista is a little bit too expensive. I checked the Modellista again. However, I did not see this issue.
Can vender give us some explanations? Thanks

[JPxM0Dz]

Originally Posted by cslntuee

I am not sure about the FRS the head light (should be the same), but I check my BRZ head light. I do not think that I have this kind of curvature in the side of my head light.
I did plan to place to place the order, before I saw this. Modellista is a little bit too expensive. I checked the Modellista again. However, I did not see this issue.
Can vender give us some explanations? Thanks

I love CF , but these are much cleaner look

[cslntuee]

Originally Posted by Asphalt~86

Agreed, it looks like a curvature.

This picture is even clear. ><

http://www.zetaperformanceltd.com/ou...t-eyelids.html

[ZetaPerformance]

Originally Posted by cslntuee

Is there a concave there (red cycle) or just the light reflection issue?
Thanks.

Yes, there is a concave spots on the cover, as it is acting as the "Aero Stabilizer Fin", which you will also find a similar design on your stock taillight,

on the TRD front bumper corner piece,

on the rear quarter panel,

as they are intended to change the direction and speed up the air flow for aerodynamics.

Originally Posted by cslntuee

I am not sure about the FRS the head light (should be the same), but I check my BRZ head light. I do not think that I have this kind of curvature in the side of my head light.
I did plan to place to place the order, before I saw this. Modellista is a little bit too expensive. I checked the Modellista again. However, I did not see this issue.
Can vender give us some explanations? Thanks

Thanks for the picture. Yes, Modellista are also offering a similar product with the concave spot as well, for both front and rear eyelid cover:

[Minovsky]

Originally Posted by ZetaPerformance

Yes, there is a concave spots on the cover, as it is acting as the "Aero Stabilizer Fin", which you will also find a similar design on your stock taillight,

on the TRD front bumper corner piece,

on the rear quarter panel,

as they are intended to change the direction and speed up the air flow for aerodynamics.


Thanks for the picture. Yes, Modellista are also offering a similar product with the concave spot as well, for both front and rear eyelid cover:

I wish the ones you had were slightly thicker~~ =/

[cslntuee]

[QUOTE=ZetaPerformance;757228]Yes, there is a concave spots on the cover, as it is acting as the "Aero Stabilizer Fin", which you will also find a similar design on your stock taillight,


HI,
Thanks. I catch your point.
However, Modellista one looks symmetry between head and tail light which both are small convex wing. Your is a concave which is opposite shape of the tail light? Or both are concave, just the image issue?
Thanks

[Rayme]

WIll you guys do a similar setup for the rear lights? They are quite flat on the top, it would be a nice touch.

[ZetaPerformance]

[quote=cslntuee;760310]

Originally Posted by ZetaPerformance

Yes, there is a concave spots on the cover, as it is acting as the "Aero Stabilizer Fin", which you will also find a similar design on your stock taillight,


HI,
Thanks. I catch your point.
However, Modellista one looks symmetry between head and tail light which both are small convex wing. Your is a concave which is opposite shape of the tail light? Or both are concave, just the image issue?
Thanks

Our eyelid cover are the same as the Modellista, which is "convex" and the bump is above the surface, not concave, it might be just an image issue.

Originally Posted by ottopilot

WIll you guys do a similar setup for the rear lights? They are quite flat on the top, it would be a nice touch.

We only offering the front set at this moment, but the rear one is still in development.

[JDMenrique]

Ive never been a fan of eyelids but you guys keep coming out with great looking products. Any engine bay CF components in the future? Keep up the good work!