OFT users with ZA1J700C and ZA1J900C ROMs - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Shiv@Openflash · 12-16-2013, 10:09 PM

Hi guys,
We are in the process of sorting out Advance Multiplier logging for these early USDM ROM types. One person has reported that Adv Mult stays at 0 (i.e., doesn't log correctly). While another has reported (and just sent me a log) of it logging correctly (i.e. displaying a value between 0 and 1.0).

Could I have some more feedback from others with these ROM types? Just need to know the following:

1) What is your ROM type (ZA1J700C or ZA1J900C)
2) What does your Advance Multiplier value right after a write process (it is either going to be 1.0 or 0.0)

That's it! Feedback would be greatly appreciated. I know most users have newer ROM types (ZA1JA00C and ZA1JA01C) so I'm probably not going to get too many responses

I am also aware that many non-USDM ROMs do not currently log Adv Mult either. And this will be addressed after we address this issue in USDM cars

Cheers,
shiv

FrsDuke · 12-16-2013, 10:57 PM

Mine 700c started at 1, but I think you knew that 8)
Thanks again!

cnk · 12-16-2013, 11:01 PM

ZA1J700C
Starts at 1

I actually posted a log up of a run right after I updated to the 1.34 ROM here: http://www.datazap.me/u/cnk/oft-134-tune-11-24-2013?1

Nothing crazy, just a cruise to check out the logging feature when it was released. You can see the IAM is 1 across the entire run.

garfull · 12-16-2013, 11:47 PM

ZA1J700C. havent tried logging but the real time view shows it always at 1.0 running stock e85 too.

3essess · 12-17-2013, 03:41 AM

700c and mine starts at 1.0 with previous and latest tunes

Indestruct · 12-17-2013, 04:18 AM

700c and mine is always at 1 as welll

Vmax911 · 12-17-2013, 12:22 PM

Quote:

Originally Posted by shiv@vishnu

1) What is your ROM type (ZA1J700C or ZA1J900C)
2) What does your Advance Multiplier value right after a write process (it is either going to be 1.0 or 0.0)

I'm the guy have problems logging the Advance multiplier with the stock ROM. To answer the two questions:

1) ZA1J700C
2) I don't know, I haven't written anything to the ECU. I simply initiated the OFT, did a read, and tried datalogging the Stock ROM values. In this scenario Advanced multipier is always 0.

Shiv@Openflash · 12-17-2013, 01:03 PM

Quote:

Originally Posted by Vmax911

I'm the guy have problems logging the Advance multiplier with the stock ROM. To answer the two questions:

1) ZA1J700C
2) I don't know, I haven't written anything to the ECU. I simply initiated the OFT, did a read, and tried datalogging the Stock ROM values. In this scenario Advanced multipier is always 0.

You will be able to log Adv Mult when you load one of our OTS maps.

Shiv@Openflash · 12-17-2013, 01:55 PM

Thanks for the feedback gents!

12-16-2013, 10:09 PM	#1
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,469 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	OFT users with ZA1J700C and ZA1J900C ROMs Hi guys, We are in the process of sorting out Advance Multiplier logging for these early USDM ROM types. One person has reported that Adv Mult stays at 0 (i.e., doesn't log correctly). While another has reported (and just sent me a log) of it logging correctly (i.e. displaying a value between 0 and 1.0). Could I have some more feedback from others with these ROM types? Just need to know the following: 1) What is your ROM type (ZA1J700C or ZA1J900C) 2) What does your Advance Multiplier value right after a write process (it is either going to be 1.0 or 0.0) That's it! Feedback would be greatly appreciated. I know most users have newer ROM types (ZA1JA00C and ZA1JA01C) so I'm probably not going to get too many responses I am also aware that many non-USDM ROMs do not currently log Adv Mult either. And this will be addressed after we address this issue in USDM cars Cheers, shiv Last edited by Shiv@Openflash; 12-17-2013 at 12:57 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Differences between the 00 and 01 Roms	brn12345	Software Tuning	1	11-04-2013 10:42 PM
PSA RE: Torque app users	ZionsWrath	Other Vehicles & General Automotive Discussions	1	10-24-2013 06:28 PM
I need help please, I don't see any roms on my ecutek	Frsexxxy	Engine, Exhaust, Transmission	2	04-26-2013 12:03 PM
E-85 users thread	Crossover Auto	Engine, Exhaust, Transmission	41	11-16-2012 07:21 PM
Rwd toyota users here?	aphxero	Other Vehicles & General Automotive Discussions	14	12-23-2009 09:34 PM

12-16-2013, 10:57 PM	#2
FrsDuke Fanboy Join Date: Dec 2013 Drives: 2013 ultramarine frs Location: Tx Posts: 612 Thanks: 242 Thanked 337 Times in 203 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Mine 700c started at 1, but I think you knew that 8) Thanks again!

12-16-2013, 11:01 PM	#3
cnk Senior Member Join Date: Aug 2012 Drives: '13 DGM BRZ Limited Location: NJ Posts: 1,201 Thanks: 59 Thanked 547 Times in 339 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	ZA1J700C Starts at 1 I actually posted a log up of a run right after I updated to the 1.34 ROM here: http://www.datazap.me/u/cnk/oft-134-tune-11-24-2013?1 Nothing crazy, just a cruise to check out the logging feature when it was released. You can see the IAM is 1 across the entire run.

12-16-2013, 11:47 PM	#4
garfull Senior Member Join Date: Apr 2013 Drives: FRS(sold), AP2, R35, FJC, ED9 Location: 510 Posts: 527 Thanks: 370 Thanked 192 Times in 128 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	ZA1J700C. havent tried logging but the real time view shows it always at 1.0 running stock e85 too.

12-17-2013, 03:41 AM	#5
3essess Member Join Date: Jun 2012 Drives: frs Location: middle of the pacific Posts: 45 Thanks: 53 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	700c and mine starts at 1.0 with previous and latest tunes

12-17-2013, 04:18 AM	#6
Indestruct Senior Member Join Date: Mar 2012 Drives: 2013 SWP Limited BRZ, MT Location: Oakland, CA Posts: 252 Thanks: 52 Thanked 51 Times in 34 Posts Mentioned: 6 Post(s) Tagged: 1 Thread(s)	700c and mine is always at 1 as welll

12-17-2013, 01:55 PM	#9
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,469 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	Thanks for the feedback gents!

User Name		Remember Me?
Password