follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > 2nd Gens: GR86 and BRZ > GR86 General Topics (2nd Gen 2022+ Toyota 86)

GR86 General Topics (2nd Gen 2022+ Toyota 86) General topics for the GR86 second-gen 86


User Tag List

Reply
 
Thread Tools Search this Thread
Old 01-30-2023, 01:10 PM   #85
JDMChris
Senior Member
 
Join Date: Oct 2013
Drives: 2016
Location: Riverside, CA
Posts: 277
Thanks: 51
Thanked 121 Times in 88 Posts
Mentioned: 6 Post(s)
Tagged: 2 Thread(s)
Send a message via AIM to JDMChris
Quote:
Originally Posted by zeroomega View Post
Local 86cup fb group. Gen1 car with 2015 engine. I don't know the owner so I don't know more details. I guess now you see one example.
It means nothing without knowing variables. He could have been low on oil for all we know. Could have been running crappy oil. Who knows.
JDMChris is offline   Reply With Quote
Old 01-30-2023, 01:31 PM   #86
Dzmitry
Senior Member
 
Dzmitry's Avatar
 
Join Date: Jul 2019
Drives: 2018 Subaru BRZ Limited with PP
Location: Phildalphia, Pennsylvania
Posts: 975
Thanks: 2,123
Thanked 609 Times in 391 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Garage
Just btw, I don't believe this was linked anywhere here. Good read on a large discussion over gen1 FA20 oiling issues. Worth skimming and reading through most of the thread (11 pages) for you @KillerBMotorsport, if you haven't seen it yet. Some good testing and data provided in there.

https://www.ft86club.com/forums/showthread.php?t=134863

Last edited by Dzmitry; 01-31-2023 at 07:30 AM.
Dzmitry is offline   Reply With Quote
Old 01-30-2023, 03:40 PM   #87
timurrrr
Senior Member
 
timurrrr's Avatar
 
Join Date: May 2019
Drives: 2022 GR86
Location: Between Sonoma and Laguna Seca
Posts: 1,717
Thanks: 2,135
Thanked 1,314 Times in 725 Posts
Mentioned: 31 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by Dzmitry View Post
Just btw, I don't believe this was linked anywhere here. Good read on a large discussion over gen1 FA20 oiling issues. Worth skimming and reading through most of the thread (11 pages) for you @KillerBMotorsport, if you haven't seen it yet. Some good testing and data provided in there.
Forgot to paste the actual link?
__________________
Follow the build thread for my GR86!
timurrrr is offline   Reply With Quote
The Following User Says Thank You to timurrrr For This Useful Post:
Dzmitry (01-31-2023)
Old 01-30-2023, 05:22 PM   #88
JDMChris
Senior Member
 
Join Date: Oct 2013
Drives: 2016
Location: Riverside, CA
Posts: 277
Thanks: 51
Thanked 121 Times in 88 Posts
Mentioned: 6 Post(s)
Tagged: 2 Thread(s)
Send a message via AIM to JDMChris
Quote:
Originally Posted by zeroomega View Post
Local 86cup fb group. Gen1 car with 2015 engine. I don't know the owner so I don't know more details. I guess now you see one example.
It was a junkyard engine. So who knows what it could have been. He did mention temps and pressures were fine.
JDMChris is offline   Reply With Quote
Old 01-30-2023, 09:30 PM   #89
zeroomega
Member
 
zeroomega's Avatar
 
Join Date: Jul 2018
Drives: Supra MKV, FR-S
Location: Bay area, CA
Posts: 75
Thanks: 22
Thanked 76 Times in 31 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Some updates after last weekend at Buttonwillow.

TL;DR, I don't think Syms Racing oil pan baffle is quite useful. But it doesn't seem to make the matter worse.

I did a side by side comparison of oil pressure log with and without Syms Racing oil pan baffle (a picture can be found from https://www.japanparts.com/parts/detail/?id=64611). See the data log image (click it to see the full res image) below,
* Red is logged with the oil pan baffle installed with oil temperature around 220F on Jan. 28, 2023
* Green and blue is logged without oil pan baffle with oil temperature around 210F on Nov. 25, 2022

(disclaimer, I am new to Buttonwillow track so my driving might not be consistent enough)



If you are familiar with Buttonwillow 13CW layout (see the map below), all the turns that has oil pressure drops marked in the image are right turns. And the pattern is quite similar, it starts with a hard braking and a right turn with more than 1g lateral.

Name:  ButtonWillowMapRE.jpg
Views: 691
Size:  41.4 KB

* Turn Off Ramp: With baffle, it looks like the pressure is even slightly lower to 22psi. But I am not too worried about this turn as the RPM dropped below 4k and pressure recovered before throttle increased.
* Turn Club Corner: Pressure dropped for less than 0.5sec and with baffle, the minimal pressure is marginally improved.
* Turn Riverside: Oil pressure is oscillating regardless of presence of baffle. This is a 6sec 1.1g right turn with a little bit positive camber. However, unlike other turn marked here, the car enter the turn with throttle instead of braking.
* Turn Phil Hill: This is a right turn with hill top. With baffle, the minimal pressure is improved from 30psi to 40psi. The pressure drop lasted for around 1 sec.
* Turn Sweeper: This is a long double apex flat right turn with around 1.1g. Oil pressure is oscillating regardless of presence of baffle.

So, yeah, the syms oil pan baffle (even though it is on Japan's 86cup approve list) doesn't seem to improve or worsen anything, at least at Buttonwillow CW13. But the pressure drops at BW is also not as bad as what I seen at Thunderhill West, where at T5 the car dropped to 30psi for around 5 sec.

I don't think the pressure drops I experienced are AVCS related. If it is, I should see the same pressure drops in left turns. But from the log, the pressure drop looks simply correlated to right turn or hill top (or both), so I highly suspect it may be simply due to the oil pick up is installed to the passenger side. It would be great if we could have a transparent oil pan and mount a camera there to see what is actually happening. The AVCS is probably responsible to the slight pressure drop when engine RPM is near red line. But I don't think that amount of drop should be worried about.

I personally don't use the case that a shop car with certain mods survived a track or not as an indicator on whether that platform or mod is reliable on track. Especially without published data logs on the car's running conditions. And unfortunately not many shop or vendor will publish that data. A single car survival or failure in a certain track for a single HPDE track day doesn't mean much. If it survived a 24h endurance racing, that is a different story. But previous gen 86 doesn't have a good track record in endurance. IIRC TAPG's 86 blew the engine in Thunderhill 25hr in 2018. So I won't say the car/engine is alright just because I didn't see any failure at some tracks. :-) In fact, I have seen 3 FA20 engine blows personally, though they may not related to oiling. With FA24, it would take years for us to know if it better or worse than previous gen FA20. With this uncertainty, I prefer to play it safe and do logging if I can. In the worse case when it fails, I at least have some data to do a post mortem.

Another issue is that for most HPDE/ Amateur time trial drivers, setting up data logs that is not directly from ECU is quite complicated. When I decide to log oil pressure, there is no off the shelf product (that is economical enough) that I can use to log the data into a AIM Solo DL2 or some data logging apps like RaceChronos. I have to build 3 iterations of circuit boards to read oil pressure sensor input and send it over CAN bus so it can be logged. Below are the boards I built for logging the oil pressure:
Name:  IMG_1912RE.jpg
Views: 745
Size:  145.3 KB

I would hope some company can build a similar product with reasonable price. The market for this might not very big or profitable though.
zeroomega is offline   Reply With Quote
The Following 8 Users Say Thank You to zeroomega For This Useful Post:
BioRebel (01-31-2023), Code Monkey (01-30-2023), DarkSunrise (01-30-2023), Dzmitry (01-31-2023), jongers (02-01-2023), nissanfanatic (01-30-2023), Pat (01-30-2023), Will_ (01-30-2023)
Old 01-30-2023, 10:09 PM   #90
nissanfanatic
Member
 
nissanfanatic's Avatar
 
Join Date: Oct 2022
Drives: 2023 BRZ
Location: localhost
Posts: 57
Thanks: 43
Thanked 52 Times in 21 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by zeroomega View Post
* Turn Riverside: Oil pressure is oscillating regardless of presence of baffle. This is a 6sec 1.1g right turn with a little bit positive camber. However, unlike other turn marked here, the car enter the turn with throttle instead of braking.
Doesn't the pickup sit towards the rear of the pan? It appears to based on the pictures I looked at. That would track with the drop happening under right handers with deceleration, and not as bad under accel.

Think it would be possible to give a few brake pedal stabs next time out on hard right handers?XD
I've done some basic hardware stuff like UART stuff on routers, rpi stuff, etc so I'll start looking into building something similar to what you have unless you happen to open source your stuff first.
nissanfanatic is offline   Reply With Quote
Old 01-30-2023, 10:58 PM   #91
zeroomega
Member
 
zeroomega's Avatar
 
Join Date: Jul 2018
Drives: Supra MKV, FR-S
Location: Bay area, CA
Posts: 75
Thanks: 22
Thanked 76 Times in 31 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by nissanfanatic View Post
Doesn't the pickup sit towards the rear of the pan? It appears to based on the pictures I looked at. That would track with the drop happening under right handers with deceleration, and not as bad under accel.
Yes, the drop is not as bad as some brake and right turns like "off ramp". But it still drops, probably because lateral g is way higher than longitudinal g and it is a long corner so the pump depletes the pan eventually.

Quote:
Originally Posted by nissanfanatic View Post
Think it would be possible to give a few brake pedal stabs next time out on hard right handers?XD
I would avoid trail braking into Riverside, that is asking for trouble XD. Last Saturday is a timed event so I need to prioritize lap time instead of doing experiments. But it would be nice to experiment different braking strategy on other slower technical hard right turns to see how the oil pressure reacts.

Quote:
Originally Posted by nissanfanatic View Post
I've done some basic hardware stuff like UART stuff on routers, rpi stuff, etc so I'll start looking into building something similar to what you have unless you happen to open source your stuff first.
The 2nd iteration is open-source already: https://github.com/zeroomega/canmim it contains reference circuit schematic and Gerber file so you can order the PCB from some PCB manufactures and build your own copy. I am still cleaning up the software for the 3rd iteration board so it will take some time for me to update the repo with the 3rd iteration. But this board is mostly work for GR86 that the CAN data is logged from ASC unit, not the OBD2. If you have a gen1, you probably have to implement your own programming to work with the OBD2 CAN protocol.
zeroomega is offline   Reply With Quote
Old 01-31-2023, 01:13 AM   #92
Blighty
Senior Member
 
Join Date: Oct 2012
Drives: WR Blue Pearl 2022 Subaru BRZ
Location: Melbourne
Posts: 818
Thanks: 790
Thanked 517 Times in 274 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by KillerBMotorsport View Post
snip
...

On the dyno is where it needs to be done. It's a controlled environment. You monitor inlet/outlet pressure and flow. You do pulls and recharge the accumulator at various RPM points and watch what happens.
Would a dyno be able to replication the low pressure conditions though? The pressure drops are still when the pump is trying hard, so faking pressure through modifying the pump cycle would not be a great test for instance.
Blighty is offline   Reply With Quote
The Following User Says Thank You to Blighty For This Useful Post:
nissanfanatic (01-31-2023)
Old 01-31-2023, 06:59 AM   #93
KillerBMotorsport
 
KillerBMotorsport's Avatar
 
Join Date: Apr 2021
Drives: BRZ
Location: Virginia
Posts: 568
Thanks: 89
Thanked 711 Times in 325 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Blighty View Post
Would a dyno be able to replication the low pressure conditions though? The pressure drops are still when the pump is trying hard, so faking pressure through modifying the pump cycle would not be a great test for instance.
Again, the pressure drop off or light throttle is not the concern here. Pressure drop at WOT is very much the concern, and easy to duplicate on the dyno.

The accumulator would be drained to whatever its minimum would be and recharged under load. I would do it at 1,000 RPM increments to start with. On the dyno you can prolong the pull, shorten it, or hold it at a certain RPM and just hold full load continually. So, you can set up some pretty severe conditions while very closely monitoring oil pressure, temperature and flow.
KillerBMotorsport is offline   Reply With Quote
The Following User Says Thank You to KillerBMotorsport For This Useful Post:
Blighty (02-01-2023)
Old 01-31-2023, 07:30 AM   #94
Dzmitry
Senior Member
 
Dzmitry's Avatar
 
Join Date: Jul 2019
Drives: 2018 Subaru BRZ Limited with PP
Location: Phildalphia, Pennsylvania
Posts: 975
Thanks: 2,123
Thanked 609 Times in 391 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by timurrrr View Post
Forgot to paste the actual link?
LOL, yes I did.
https://www.ft86club.com/forums/showthread.php?t=134863
Dzmitry is offline   Reply With Quote
Old 01-31-2023, 01:59 PM   #95
Ansix Auto
FT86Club Official Vendor
 
Join Date: Oct 2022
Drives: 2023 BRZ
Location: Canada
Posts: 64
Thanks: 5
Thanked 77 Times in 34 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
We actually built a prototype unit as well that can send oil pressure to the Canbus for logging. We're evaluating the feasibility at the moment since it's quite labor intensive to build. If people are interested in this, please let us know. Maybe we can do a small production run or group buy.

@zeroomega I noticed both baffles you've tested don't have trap doors. Would that be something you'd be interested in? We can send you ours to try out.

https://ansixauto.com/2022-brz/gr86-...il-pan-baffle/
__________________
Check out our GR86 and BRZ products!

https://ansixauto.com/subaru/
Ansix Auto is offline   Reply With Quote
The Following User Says Thank You to Ansix Auto For This Useful Post:
nissanfanatic (01-31-2023)
Old 01-31-2023, 02:08 PM   #96
nissanfanatic
Member
 
nissanfanatic's Avatar
 
Join Date: Oct 2022
Drives: 2023 BRZ
Location: localhost
Posts: 57
Thanks: 43
Thanked 52 Times in 21 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Ansix Auto View Post
We actually built a prototype unit as well that can send oil pressure to the Canbus for logging. We're evaluating the feasibility at the moment since it's quite labor intensive to build. If people are interested in this, please let us know. Maybe we can do a small production run or group buy.
Would a DIY kit be more feasible?
nissanfanatic is offline   Reply With Quote
Old 01-31-2023, 02:12 PM   #97
Ansix Auto
FT86Club Official Vendor
 
Join Date: Oct 2022
Drives: 2023 BRZ
Location: Canada
Posts: 64
Thanks: 5
Thanked 77 Times in 34 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Good question.. I'm not sure if I have a good answer. A DIY kit is a bit of a half measure, you might as well just fully DIY then?
__________________
Check out our GR86 and BRZ products!

https://ansixauto.com/subaru/
Ansix Auto is offline   Reply With Quote
Old 01-31-2023, 02:27 PM   #98
zeroomega
Member
 
zeroomega's Avatar
 
Join Date: Jul 2018
Drives: Supra MKV, FR-S
Location: Bay area, CA
Posts: 75
Thanks: 22
Thanked 76 Times in 31 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Ansix Auto View Post
We actually built a prototype unit as well that can send oil pressure to the Canbus for logging. We're evaluating the feasibility at the moment since it's quite labor intensive to build. If people are interested in this, please let us know. Maybe we can do a small production run or group buy.

@zeroomega I noticed both baffles you've tested don't have trap doors. Would that be something you'd be interested in? We can send you ours to try out.

https://ansixauto.com/2022-brz/gr86-...il-pan-baffle/
Thanks for the offering but I would prefer to avoid using baffle with rubber trap doors as some Japanese drivers tested the cusco oil pan baffle (which also use rubber trap doors). The rubber trap doors fall off and clogged the oil pick up.

From my test data, I don't think the horizontal oil pan baffle is enough to the pressure drop issue, there probably needs vertical baffles near the driver side lower pan to mitigate the pressure drop in right hand corners.


I agree on labor intensive part of building the board. For DIYers like me, it took me 2hr to assemble a board with SMD components. I won't make a profit if I decide to sell it at low price. The price can be greatly reduced if the board is pre-soldered from a manufacture like JLCPCB though.
zeroomega is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AD08R tire pressure Drag Race pro_turbo Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack 0 11-13-2021 04:04 AM
Oil pressure drops to zero after a cold start? MINOCIN Engine, Exhaust, Transmission 24 07-10-2014 02:57 PM
Darren drops his phone onto the Formula D track... DarrenDriven Northwest 2 07-22-2013 03:30 AM
No Race Track Seats in Race Car Drivers Every Day Cars..!! JohnnyNight Cosmetic Modification (Interior/Exterior/Lighting) 24 10-16-2012 04:42 PM
FRS @ willow springs (1.8 mile race track with 12 corners) scionnut Southern California 7 08-04-2012 02:29 AM


All times are GMT -4. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.