10-28-2021, 11:27 AM | #4355 |
Senior Member
Join Date: Mar 2021
Drives: Honda Insight
Location: North Carolina
Posts: 113
Thanks: 39
Thanked 42 Times in 24 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
So install the Edelbrock be content with 285 to the wheels and save the additional 15 grand as a down payment on a Nissan Z. Gotcha.
|
10-30-2021, 08:36 AM | #4356 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,542
Thanks: 8,930
Thanked 14,189 Times in 6,840 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
|
10-30-2021, 12:35 PM | #4357 | |
Senior Member
Join Date: Mar 2021
Drives: Honda Insight
Location: North Carolina
Posts: 113
Thanks: 39
Thanked 42 Times in 24 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Which really the Exige would be over 100k too after doing the necessary work so both are likely not options right now. Why don't you recommend the Z? |
|
10-31-2021, 06:22 PM | #4358 | |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,542
Thanks: 8,930
Thanked 14,189 Times in 6,840 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
Quote:
The Z's powertrain is recycled out of known parts, which is why I can conclusively say this. Realistically, a 2020 Supra with $2k spent in addition will get you a rock solid 500whp for the street/strip, and run 10's all day, while still being trackable. That identical spend in a new Z, assuming it's 40k, will ultimately be higher to match the Supra's capability. Stock for stock, out of the box, the Z's punching at a higher price point, but I doubt most people are buying Supras to leave it alone, which is where the Supra's value lies; the Supra punches under its price point stock. |
|
11-01-2021, 10:38 AM | #4359 | |
Senior Member
Join Date: Mar 2021
Drives: Honda Insight
Location: North Carolina
Posts: 113
Thanks: 39
Thanked 42 Times in 24 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
11-16-2021, 09:09 PM | #4360 |
Senior Member
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 415
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
|
Dang ol Delicious man, I tell you what. My car had some idle issues and an MAF code. I went through all the connections from the DD box. One of them had a wire that was not inserted into the harness. I feel like I got it inserted well and secured. (Little orange grommet goes over wire into harness) plugged it back in and connected my battery. No more codes, idle smooth and doesn’t stall, traction control is restored.
Getting dyno tuned for E85 on the 30th! |
The Following User Says Thank You to dpfarr For This Useful Post: | GPhilly (01-07-2022) |
11-16-2021, 10:51 PM | #4361 | |
Senior Member
Join Date: Jun 2021
Drives: 2015 FR-S
Location: San francisco
Posts: 362
Thanks: 151
Thanked 157 Times in 103 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
11-16-2021, 11:56 PM | #4362 | |
Senior Member
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 415
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
|
Quote:
It was fried. I got an upgrade from Delicious for new one and new ff sensor. I hacked the hard plastic off the connector and did some heat shrink over it. It sucks but I couldn’t pull it off so fingers crossed. The first gen alternators are a different amperage so there’s no possibility of me figuring that shit out. Feeling anxious when I get to take it to the track. Been having way too much fun getting loose! |
|
12-07-2021, 06:15 PM | #4363 |
Senior Member
Join Date: Jul 2018
Drives: 2016 Scion FRS Release Series 2#439
Location: Chatham, Ontario, Canada
Posts: 726
Thanks: 4
Thanked 156 Times in 129 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quick Question…
I’m nearing the completion of the installation of my previously enjoyed Edelbrock S/C.
My question is, do I re-install the black plastic shroud which covers the space between the crash bar and the upper rad support? It seems critical to the OEM to control air flow to the a/c condenser and radiator. Would it not be beneficial to re-install it after adding the Edelbrock heat exchanger? Don’t see any instruction in the installation manual. |
12-09-2021, 09:15 AM | #4364 |
Senior Member
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 516
Thanks: 202
Thanked 203 Times in 142 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Quick update on the remote MAP kits for the Edelbrock. We are up to 6 orders as follows: @aKaGorganZola @Auto_egr @boldfin @Brewster @dpfarr @Swolzee
If we can get to 8, I'll put in the order for the CNC shop and hope the 2 additional follow up some time soon. The more orders we get, the cheaper I can get it to you. 10 being the bare minimum otherwise it gets pretty costly per unit. These are aluminum billet CNCed with black anodized finish. All lines, o-rings, and fittings included for the basic install. There's also a second way to install (the way I have on my car) that requires a bit more expensive T-adapter ($11 before tax). Both ways work fine, it's just a matter of where you would rather get your vacuum for the bypass valve. Stock kit gets it from the remote adapter line, the additional t-adapter gets it from the brake booster vacuum line. If you would like your name added or taken off the list, please PM me. |
The Following 2 Users Say Thank You to B T For This Useful Post: | aKaGorganZola (12-10-2021), Auto_egr (12-09-2021) |
12-09-2021, 05:23 PM | #4365 |
Senior Member
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 415
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
|
Asked the guy at Snail for a conservative tune for longevity. Don’t know if that’s why my numbers are what they are but…
|
12-10-2021, 01:48 PM | #4366 |
Senior Member
Join Date: May 2017
Drives: 2013 FR-S Series 10
Location: CA
Posts: 1,073
Thanks: 172
Thanked 497 Times in 326 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Cleaned my air filter for the first time the other day. For anyone who's yet to do it, make sure you let the damn thing dry 100%. I let it sit in the sun for a few hours and it felt perfectly dry and flicked it around with no water coming out of it. Installed it and my car would crank, start and then just die. Pulled the MAF and the thing was SOAKED. Cleaned the maf with some maf cleaning spray and wiped all the wet parts down with IPA and let everything dry. Dried the filter indoors with a space heater blowing on it (not too close obviously) overnight. Luckily my MAF didn't have to be replaced and car runs fine. I did reclean and reoil it since the filter should be 100% dry before you oil it.
This is the OG oiled filter, have not switched to the dryflow. For what it's worth, it's been almost 30k miles and the filter wasn't that dirty at all, probably could have let it go longer. My throttle body looked clean as a whistle too which was nice to see. Little to no carbon or oil buildup.
__________________
2013 FR-S 10 Series ~75k (SOLD)
RCE SS-1 Coilovers Corsa Catback Edelbrock Supercharger installed @ 50k |
12-10-2021, 02:29 PM | #4367 | |
Member
Join Date: Feb 2020
Drives: 2017 BRZ Series. Yellow
Location: CT
Posts: 93
Thanks: 25
Thanked 28 Times in 24 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
12-10-2021, 04:50 PM | #4368 | |
Member
Join Date: Jan 2019
Drives: 2017 Series.yellow BRZ
Location: Central Ohio
Posts: 33
Thanks: 63
Thanked 15 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Your numbers look like my Edelbrock stock numbers. Mustang dynos can provide misleading numbers. For comparison to other dynos they should use the SAE correction factor. Also they need to be recalibrated annually and most are not. Put your car on a dynojet to see realistic numbers. No I don’t sell them. |
|
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vortech Owner Thread & Setup Questions | reyruiz191 | Forced Induction | 340 | 05-17-2022 12:44 PM |
Edelbrock E-Force Supercharger | itsibarra | Forced Induction | 938 | 07-31-2021 04:48 PM |
Most annoyingly over-asked questions on FT86 forums | mit_peid | Off-Topic Lounge [WARNING: NO POLITICS] | 36 | 01-16-2014 02:48 PM |
Brz Info/Specs (helpful info for questions asked often) | Gaen | BRZ First-Gen (2012+) -- General Topics | 0 | 05-24-2012 10:09 PM |