SOCAL: Local FS/FT

[jaycee]

Hey all looking for some stock headers to purchase.

I'm in the Orange County area and willing to do a bit of driving so you don't have to ship. PM me if you have any questions, thanks!

[g_steelo99]

Wtb: toms tailights and cusco or aem strut bar with master cylinder brace


Sent from my iPhone using Tapatalk

[Smackdaddy955]

Originally Posted by VIP BRZ

WTB, Used Front Bumper cover 2013 - 2016 Subaru BRZ

Can be damaged to some extent, /w or /w out badge. any color!
Lmk what you got

I'm also looking for an undamaged driver side front fender if anyone has one, again any color.

I have a WRB one off my 2014 BRZ. Tabs a bit damaged, can provide pics if interested, lmk.

[jflogerzi]

First one to claim it and pick gets it, 2 batteries, water proof case and a pick of a bunch of un-open accessories. It also has an external Mic.

[Deezsniderz]

**SOLD**

[fitcious]

Originally Posted by Deezsniderz

Lots of life left, $200, pick up only

Are these stock tires? What is the manufactured date? Location?

[MujisGarage]

WTB:
BBK rotors that will fit Wilwood Superlite 6R Big Brake Front

Located in the IE willing to travel for them.

[Deezsniderz]

Originally Posted by fitcious

Are these stock tires? What is the manufactured date? Location?

Yeah stock tires, i don’t know the manufacture date, but i bought the car new last January. South Pasadena

[MujisGarage]

Located in IE
Not willing to ship
Willing to meet up half way
Asking Price: 300

Brand new never opened Injen Evolution CAI

[manualmotive]

FS: (Click on pictures for full size)
Pickup in 92691

SSI UEL Catless Header - $400
(No gaskets or hardware)




Cosmis MR-II 18x8.5 +22 5x100 Gun Metal - $500
2 wheels have bends (one barely noticeable) but hold air, all have curb rash.
3 tires are good with tread (Indy 500 245/35R18), 4th is popped.




Zenki BRZ bumper parts
DRLs $60
Fog light bezels $20
Fog lights $20




6qt 0w-20, 4L 75w90 engine & gear oil - $30
Brand new oil, enough for engine, trans, and diff change. Switching to 5w30 & Motul so I no longer need.






WTB:
High flow frontpipe
Tein Mono Sport/Racing coils
'13-'16 BRZ wiring harness (cut is fine)

[beltax90]

looking for zenki front bumper in decent shape, some scratches are okay. mainly just want all the tabs to still be intact.

any color fine but would prefer black or red.

willing to pick up in socal area

thanks

[fitcious]

WTB: stock intake and stock wheels with tires.

Or trade plus cash.

Anyone want to buy my TRD intake for $200 plus your stock one.

[deesu]

WTS>
Tein Streetflex $700 obo. Great condiition. DM me for more photos
Openflash Tablet v1, unmarried $350 obo. Has a small scratch from previous owner

[kask2_6.0]

Custom Turbo Kit - $4000
I am an automotive engineer and designed/fabricated this setup about 4 years and 15k miles ago. I still believe this is one the best setups for a FA20.

Included:
Borg Warner EFR 6758 - 0.80 A/R T4 Twin Scroll
Turbosmart IWG75 twin port wastegate actuator - 12 psi springs. Can run 12-20+ psi on this spring setup.
4-port boost solenoid
Turbosmart Race Port BOV
ACE 4-2-1 header with custom overpipe and custom investment cast 304 SS turbo inlet for the T4 twin scroll. Also comes with A350 overpipe to run NA if needed.
Custom intercooler with treadstone C1035 core which is rated for 600+ hp.
Modified bumper beam for intercooler mounting.
Mechanical cam-driven oil pump (from the FA20-DIT) and sump for the low mounted turbo.
Custom catch to integrate the sump vent.
Perrin engine mount brackets with brand new rubber isolators. Required for the close clearance of the twin scroll overpipe.
P-Tuning front sway bar (needed to clear low mounted turbo).
Perrin silicone radiator hoses with CSF aluminum water neck.
Perrin master cylinder brace.
Aluminum steering rack bushings.
ACT XT Street clutch kit (SB7-XTSS)
JDM ac delete pulley. Not necessary to fit the turbo though.
Nameless performance alternator and ac belt covers - Black.

All hot side components are coated with swaintech white lightning ceramic. This coating is very good but extremely hard to keep clean as you can see from the pics. Can be painted over with any high temp paint if you choose to do so. All cold side piping was just powder coated with a fine texture satin black when the kit was removed.

See the build thread for more info and pics of the turbo setup: https://www.ft86club.com/forums/showthread.php?t=99861

Located in SD.