KM4SH rocketbunnyXspeedhunters kit - Page 7 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

huertash · 11-25-2014, 07:29 PM

Quote:

Originally Posted by No5ki

order took 3-4 weeks, shipping to Texas was $1k usd

I just installed mine a week or two ago. ill post pics later. there are some in the rocket bunny registry now.

nice to meet you #004! #005 here! That makes you the first KM4SH in Canada?! any word on #006+?

Im not from Canada. I'm from Puerto Rico. Hopfully the #006☺️. Or at least one of the single digits.

Sent from my iPhone using Tapatalk

d.liang · 11-28-2014, 12:17 PM

Can we see some pics from the front and rear? Trying to get an idea of how flush you are so I can figure out my wheel specs. I just got my kit the other day.

dobbrz · 11-29-2014, 01:48 AM

Quote:

Originally Posted by No5ki

Kit requires quite a large drop. Note the area in front of the rear tire. If your suspension travels beyond this point, you'll have to lift the car from the LCAs. I've ordered some coilovers, but until then it's all about driving slow over bumps. Already I can feel when I go over bumps, the tire drops and rubs the fender. 17x9.5 for reference.

Please lower it...:/
Ps you may want to get 18s for more ground clearance when you lower it

BRZPDX · 11-29-2014, 12:48 PM

Quote:

Originally Posted by No5ki

Enkei RPF1 17x9.5 +18 with adapters (2x 15mm Front; 2x25mm rear)

Effective offset is like -7 rear +3 front? Little poke up front, little sunk in the rear.

pictures in my build journal. There's a link to an album too.

http://www.ft86club.com/forums/showthread.php?t=78380

did they cut both front/rear fenders? How much was install/paint/labor total?

dobbrz · 11-29-2014, 04:30 PM

Quote:

Originally Posted by No5ki

Ordered some Fortune Auto coilovers yesterday. FWIW, This is already on -.75 spring drop. I thought about 18's but I love the look of this kit on 17s. blah blah unsprung weight blah

It looks like the lower you are the the more clearance you have for that part at the back :p You can lower it a little more trust me

dobbrz · 11-29-2014, 08:00 PM

Quote:

Originally Posted by No5ki

I plan to play around with 1.5-1.7" drop and see how that goes.

cool. Can't wait to see it

HarrisRees · 12-11-2014, 06:53 AM

Hey its #0004 again!

Sorry that I haven't kept direct contact with everyone, especially #0005!

As both of us know this is a big ordeal to undertake!

Obviously #0005 is in the lead drastically. I have no chance of keeping up with his furious pace.

Mine is still in its comfy bubble wrap awaiting the right time for its time to shine.

I cant tell you when I will start my progress. But what I can tell you is:

1.The kit and sticker are safely in my possession in Fernie, British Columbia.

2.I am still making the call between KW Variant 3's or Airrex. But Static is almost certain... unless I am forced to the dark side.

3.I just ordered some interior candy (Flossy, Bride and Vertex Junk.)

4.Spent the extra buck on the TRD Louvers.

5.Fenders mirrors ordered. Objects in mirror are even more further than they will appear.

6.Wheels are very undetermined. This is the hardest part for me to conclude on. I may end up being called KopyK4T. Likely the 6666's when they are released, but really anything 9.5F+ and 10.5R+ that will look good in black to match my Ravenmobile.

I think this is it for now.

I would appreciate any input on my wheel choice. (Crazy offsets in black would be nice). Feed me.

Sorry for no pictures, development porn or what not. Frs-hit aint cheap. and kraft dinner is starting to feel expensive. I will post as soon as I fit my stuffs.Probably on a 1+ megapixel chocolate phone camera or equivalent.

huertash · 02-26-2015, 03:30 PM

Just ordered mine today!! Still dont know which #00 will be!! Let you guys know!!

Sent from my iPhone using Tapatalk

calmtigers · 04-24-2015, 01:09 AM

did they sell out? Can't seem to find the link for the kit

Dr Evil · 04-24-2015, 02:19 AM

Quote:

Originally Posted by calmtigers

did they sell out? Can't seem to find the link for the kit

http://store.speedhunters.com/us/pro...km4sh-bodykit/

NyC Zn6 · 04-24-2015, 11:13 AM

Anyone running the front lip only?

calmtigers · 04-24-2015, 03:37 PM

Quote:

Originally Posted by NyC Zn6

Anyone running the front lip only?

This is actually the reason i was looking. But it seems there is like two stage lips? The lip and the "under lip". If the bottom is just a sheet I may just make one myself for that

huertash · 05-12-2015, 12:30 PM

Does anyone has photos of how you "massaged" and alteres your rear Panels??

Sent from my iPhone using Tapatalk

cdrazic93 · 05-12-2015, 03:00 PM

Sticky this thread omg.

04-24-2015, 01:09 AM	#93
calmtigers Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout TRD FR-S 6MT Location: Fresno / DTLA Posts: 928 Thanks: 628 Thanked 376 Times in 214 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	did they sell out? Can't seem to find the link for the kit __________________ "I love dinosaurs so much that I’ve based my life on burning as much black melted dinosaur flesh as I can on a daily basis...even the screaming sound of prehistoric reptilians being burnt through any of the classic Japanese four cylinders gives me great joy."

05-12-2015, 03:00 PM	#98
cdrazic93 Junior Join Date: Aug 2013 Drives: a car Location: Probably at school Posts: 4,341 Thanks: 3,184 Thanked 2,512 Times in 1,502 Posts Mentioned: 20 Post(s) Tagged: 0 Thread(s)	Sticky this thread omg. __________________ "Ah! What music! They could have never imagined, those pioneers who invented the automobile, that it would posses us like this, our imaginations, our dreams. Men love women, but even more than that, men love CARS!"-Lord Hesketh

11-28-2014, 12:17 PM	#86
d.liang Member Join Date: Aug 2013 Drives: 13 whitout frs Location: boston Posts: 39 Thanks: 2 Thanked 14 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can we see some pics from the front and rear? Trying to get an idea of how flush you are so I can figure out my wheel specs. I just got my kit the other day.

12-11-2014, 06:53 AM	#91
HarrisRees Junior Member Join Date: Mar 2013 Drives: 2013 Raven FRS Location: Saskatoon, SK Posts: 8 Thanks: 0 Thanked 10 Times in 5 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Hey its #0004 again! Sorry that I haven't kept direct contact with everyone, especially #0005! As both of us know this is a big ordeal to undertake! Obviously #0005 is in the lead drastically. I have no chance of keeping up with his furious pace. Mine is still in its comfy bubble wrap awaiting the right time for its time to shine. I cant tell you when I will start my progress. But what I can tell you is: 1.The kit and sticker are safely in my possession in Fernie, British Columbia. 2.I am still making the call between KW Variant 3's or Airrex. But Static is almost certain... unless I am forced to the dark side. 3.I just ordered some interior candy (Flossy, Bride and Vertex Junk.) 4.Spent the extra buck on the TRD Louvers. 5.Fenders mirrors ordered. Objects in mirror are even more further than they will appear. 6.Wheels are very undetermined. This is the hardest part for me to conclude on. I may end up being called KopyK4T. Likely the 6666's when they are released, but really anything 9.5F+ and 10.5R+ that will look good in black to match my Ravenmobile. I think this is it for now. I would appreciate any input on my wheel choice. (Crazy offsets in black would be nice). Feed me. Sorry for no pictures, development porn or what not. Frs-hit aint cheap. and kraft dinner is starting to feel expensive. I will post as soon as I fit my stuffs.Probably on a 1+ megapixel chocolate phone camera or equivalent.

02-26-2015, 03:30 PM	#92
huertash Member Join Date: Jul 2012 Drives: KM4SH FRS Location: Puerto Rico Posts: 23 Thanks: 2 Thanked 4 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Just ordered mine today!! Still dont know which #00 will be!! Let you guys know!! Sent from my iPhone using Tapatalk

04-24-2015, 11:13 AM	#95
NyC Zn6 Senior Member Join Date: Apr 2013 Drives: 10 Series #974 6m/t Location: NYC Posts: 1,956 Thanks: 1,357 Thanked 1,141 Times in 669 Posts Mentioned: 6 Post(s) Tagged: 2 Thread(s)	Anyone running the front lip only?

05-12-2015, 12:30 PM	#97
huertash Member Join Date: Jul 2012 Drives: KM4SH FRS Location: Puerto Rico Posts: 23 Thanks: 2 Thanked 4 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Does anyone has photos of how you "massaged" and alteres your rear Panels?? Sent from my iPhone using Tapatalk

User Name		Remember Me?
Password