|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
05-28-2018, 04:25 PM | #1 |
Member
Join Date: Sep 2015
Drives: BRZ
Location: California
Posts: 53
Thanks: 7
Thanked 7 Times in 6 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
OIL TEMP/PRESSURE GAUGES
Does anybody run a turbo with dual radiator oil cooler? I previously had Jackson racing supercharger which is why I went with Jackson racing dual radiator. Now I have ant to monitor both oil pressure and oil temp. I used to have oil pressure at galley plug but now that I’m turbo(JDL) that galley plug feeds oil to the turbo so I’m left with no port. Now, due to the turbo intake, the oil fitting for the radiator don’t clear. I was thinking about stacking a TRD sandwich plate to hook up the temp and pressure there and at the same time clear the radiator oil lines to the Jackson adaptor. I wanted to get other opinions about doing this or other ideas.
Pictures: JR Supercharger before JDL Turbo after Please give a helping hand
__________________
Nightflo
Fresno, CA BOOSTED ‘15 BRZ Since ‘14 Last edited by Nightflo; 05-28-2018 at 05:31 PM. |
05-28-2018, 07:29 PM | #2 |
Senior Member
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,884
Thanks: 5,668
Thanked 5,805 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
|
Just get a T adapter and T into the other line. If the sensor needs space you can get a spacer too. Should work fine.
https://www.glowshiftdirect.com/1-8-...SABEgKvWvD_BwE |
05-28-2018, 07:32 PM | #3 |
Senior Member
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,884
Thanks: 5,668
Thanked 5,805 Times in 3,299 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
|
http://www.ft86club.com/forums/showthread.php?t=125350
Here is a link with a writeup I made with the galley plug locations. You could also go or T into the dummy oil sensor location. |
|
|
Tags |
gauges, jackson racing, jdl, oil, trd |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing OEM Oil Temp/Pressure sender | Bodalenko | DIY (Do-It-Yourself) Guides | 6 | 11-30-2017 03:32 PM |
pressure and temp oil in this car? | pepe | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 2 | 08-25-2015 05:02 PM |
Anyone run Tyredog pressure/temp monitors? | Thorpedo | Tracking / Autocross / HPDE / Drifting | 11 | 01-23-2015 01:51 AM |