Todoroki Front Fenders - Page 14 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mitch t · 01-13-2017, 07:40 PM

Man I wish these were available in carbon fiber.

I would love to be able to run them without dealing with the paint shop.

jordonallison · 07-09-2017, 12:25 AM

If anyone is looking to purchase a set, I am selling my Todoroki fenders for $1,100 shipped. PM me.

gypsy_seven · 07-09-2017, 12:36 AM

Quote:

Originally Posted by jordonallison

If anyone is looking to purchase a set, I am selling my Todoroki fenders for $1,100 shipped. PM me.

How much not shipped? Interested

Sent from my SM-G900V using Tapatalk

jordonallison · 07-09-2017, 12:38 AM

Quote:

Originally Posted by gypsy_seven

How much not shipped? Interested

$1k picked up, Seattle, WA.

Jav · 07-20-2017, 06:48 PM

Quote:

Originally Posted by jordonallison

If anyone is looking to purchase a set, I am selling my Todoroki fenders for $1,100 shipped. PM me.

Interested. Let me know if still avaliable.

jordonallison · 07-20-2017, 11:22 PM

Quote:

Originally Posted by Jav

Interested. Let me know if still avaliable.

Sorry, sold.

ImAdopted · 09-14-2017, 02:41 PM

does anyone know if these make the front same width as the rear? or is 30mm up front too wide for the rear? i couldnt find anything but hoping to have a nice square setup for the car

TylerLieberman · 09-14-2017, 04:28 PM

Quote:

Originally Posted by ImAdopted

does anyone know if these make the front same width as the rear? or is 30mm up front too wide for the rear? i couldnt find anything but hoping to have a nice square setup for the car

Front will be a bit wider than rear.

I ran 18x9.5 +40 with 265s on my car. I ran a 3mm spacer on the rear and 24mm spacer up front so sit perfectly flush. Though I ran about .5 degrees more camber up front.

ImAdopted · 09-14-2017, 06:12 PM

Quote:

Originally Posted by TylerLieberman

Front will be a bit wider than rear.

I ran 18x9.5 +40 with 265s on my car. I ran a 3mm spacer on the rear and 24mm spacer up front so sit perfectly flush. Though I ran about .5 degrees more camber up front.

do you know how much wider the car is in the rear than the front by chance? and is it easily to spot the front being wider or is it kinda hard to tell?

TylerLieberman · 09-14-2017, 07:57 PM

Quote:

Originally Posted by ImAdopted

do you know how much wider the car is in the rear than the front by chance? and is it easily to spot the front being wider or is it kinda hard to tell?

I dont..... what exactly are you trying to accomplish?

Teku18 · 09-22-2017, 05:05 PM

Quote:

Originally Posted by TylerLieberman

I dont..... what exactly are you trying to accomplish?

I think looks wise he wants the front fender to match the rear quarters. He doesn't want the front fenders to be wider than the rear of the car when it comes to profile shots. This has been my concern for a while as well, nut I'm starting to look away from that aspect of it.

TylerLieberman · 09-23-2017, 04:01 PM

I mean, from what I remember, it's very slightly wider than the rear.. but not not really noticeable unless you're just the right angle.

This is probably the best pic that shows it. It's nowhere near as pronounced as the Rocket Bunny stuff. Much more subtle.

ImAdopted · 09-26-2017, 10:53 AM

Quote:

Originally Posted by Teku18

I think looks wise he wants the front fender to match the rear quarters. He doesn't want the front fenders to be wider than the rear of the car when it comes to profile shots. This has been my concern for a while as well, nut I'm starting to look away from that aspect of it.

Quote:

Originally Posted by TylerLieberman

I mean, from what I remember, it's very slightly wider than the rear.. but not not really noticeable unless you're just the right angle.

This is probably the best pic that shows it. It's nowhere near as pronounced as the Rocket Bunny stuff. Much more subtle.

perfect explanation as to what i was trying to say Teku lol

thanks for the pic Tyler, it seems like unless you get eye level and youre measuring tape out 9/10 people wont even notice

ap3x · 10-01-2017, 04:59 PM

Hey guys, my plan is a 18x10 +38 up front with 255/35/18 tires .. will be adding camber plates to my coilovers and probably 25mm spacers up front as well. I ordered these fenders already and kind of worried if I will have some fitment issues. What do u guys think?

07-09-2017, 12:25 AM	#184
jordonallison Member Join Date: Oct 2015 Drives: 2013 FR-S Location: Seattle Posts: 60 Thanks: 14 Thanked 30 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	If anyone is looking to purchase a set, I am selling my Todoroki fenders for $1,100 shipped. PM me. __________________ IG @jordonallison

09-14-2017, 02:41 PM	#189
ImAdopted Super Saiyan Join Date: Jun 2016 Drives: 9000 HP FRS Location: Heaven Posts: 205 Thanks: 67 Thanked 56 Times in 44 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	does anyone know if these make the front same width as the rear? or is 30mm up front too wide for the rear? i couldnt find anything but hoping to have a nice square setup for the car __________________

09-23-2017, 04:01 PM	#194
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,674 Thanks: 655 Thanked 3,341 Times in 1,575 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	I mean, from what I remember, it's very slightly wider than the rear.. but not not really noticeable unless you're just the right angle. This is probably the best pic that shows it. It's nowhere near as pronounced as the Rocket Bunny stuff. Much more subtle. __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: BRZ PS headlight, hood, front wide fenders, front bumper/ body kit	Guildjs	Want-To-Buy Requests	5	10-31-2013 08:35 PM
WTB :OEM front fenders	zERoTu	Want-To-Buy Requests	0	08-14-2013 04:44 AM
Looking for 85 GTS OEM front fenders	ft86me	Exterior Parts (Aero, Lighting, Etc.)	0	03-17-2013 03:16 AM
Question About Front Fenders on FRS	c0rbin	Scion FR-S / Toyota 86 GT86 General Forum	18	05-28-2012 02:40 PM

01-13-2017, 07:40 PM	#183
mitch t Senior Member Join Date: Sep 2013 Drives: stx class lava frs Location: Los Angeles Posts: 155 Thanks: 67 Thanked 74 Times in 54 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Man I wish these were available in carbon fiber. I would love to be able to run them without dealing with the paint shop.

10-01-2017, 04:59 PM	#196
ap3x Member Join Date: Apr 2014 Drives: 2014 DGM Subaru BRZ Limited Location: Socal Posts: 33 Thanks: 3 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey guys, my plan is a 18x10 +38 up front with 255/35/18 tires .. will be adding camber plates to my coilovers and probably 25mm spacers up front as well. I ordered these fenders already and kind of worried if I will have some fitment issues. What do u guys think?

User Name		Remember Me?
Password