OpenFlash Tablet: RomRaider parameters for Launch Control and Flat-foot Shift - Page 8 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

continuecrushing · 02-18-2015, 08:03 PM

Quote:

Originally Posted by acj47

I am using the v2.06 Stg2_EL_E85_A01C.bin map.

When I am using launch control, the engine will rev to two different RPM values based on the transmission in neutral vs. in gear (tested with 1st gear).

EDIT: all testing values below are at rest, i.e. 0 mph.

For example, I have tested it with (3) separate LC RPM Delta values.
(Launch Control Disable Speed is set to the default value (6), and Flat-Foot Shift RPM Delta is set to the default value (0) for all tests.

Launch Control RPM Delta value set at 3600 (7600-3600=4000 RPM)
- clutch off, neutral: RPM=3600
- clutch on, neutral: RPM=3600
- clutch on, 1st gear: RPM=4000

Launch Control RPM Delta value changed from 3600 to 3100 (7600-3100=4500 RPM)
- clutch off, neutral: RPM=4100
- clutch on, neutral: RPM=4100
- clutch on, 1st gear: RPM=4500

Launch Control RPM Delta value changed from 3100 to 2600 (7600-2600=5000 RPM)
- clutch off, neutral: RPM=4600
- clutch on, neutral: RPM=4600
- clutch on, 1st gear: RPM=5000

It seems that no matter the setpoint, with the transmission in neutral the RPM value = LC delta - 400 RPM. Has anyone else noticed this, and/or is it an expected behavior? It doesn't do any harm, I'm mostly just curious why it happens more than anything.

I had noticed this a while back, but wasn't sure if I was doing something wrong or was using an older version or something. I only noticed, since I wasn't able to rev over 4k in neutral, while sitting still-clutch in/out didnt matter nor did being in 1st/neutral.

cameronjones239 · 02-19-2015, 11:18 AM

Quote:

Originally Posted by AlexBinJackson

Anyone know when the lc and ffs will be available for d00C cals just got oft today and cant wait to tune.

Curious how this is coming along as well, picked up the OFT excited to try these features out and a bit bummed when I saw it was not available for the 15's yet

@Shiv@Openflash

scarfo · 03-03-2015, 12:33 AM

anymore word about this, im on the DOOG rom still nothing as of yet( altough its a new rom)

einrejosh · 06-04-2015, 12:00 AM

Bump.

With the new V2 OTS tunes do we have to wait for the new XML files for the V2 OTS tunes to get LC/FFS?

Because I understand that i'd have to use a V1.x tune with the XML V1.x files to get LC/FFS, but I just don't want to considering the V2 is the most updated.

einrejosh · 06-04-2015, 12:30 AM

Quote:

Originally Posted by cameronjones239

If you have a 2015, don't hold your breath...

Nah 2014, frs. B00C

D_Thissen · 06-22-2015, 08:32 PM

Neeeeat! Thanks Shiv!
[ame]http://www.youtube.com/watch?v=DqqicIWZrO4&sns=em[/ame]

poolboy54 · 07-30-2015, 09:57 PM

Do the same concept apply to the v2.067?
I want launch control at 3k. So 7600-4600=3000, I did that but when I put the tune on my car. It started then died...

steve99 · 07-30-2015, 10:26 PM

Quote:

Originally Posted by poolboy54

Do the same concept apply to the v2.067?
I want launch control at 3k. So 7600-4600=3000, I did that but when I put the tune on my car. It started then died...

yes same patch

make sure your using the oft V2x definitions that come with V2 tune pack and not the V1.5x definitions.

poolboy54 · 07-31-2015, 07:59 AM

Thanks

kingxix · 06-22-2016, 10:11 PM

Hey guys I have my car on the oft stage 2 uel tune and I'm trying to find the launch control setting. Now I've heard all you have to do is plug the oft in, put it in first and gas it but when I do that the launch control doesn't engage. What am I doing wrong?

Songha · 06-22-2016, 10:24 PM

Quote:

Originally Posted by kingxix

Hey guys I have my car on the oft stage 2 uel tune and I'm trying to find the launch control setting. Now I've heard all you have to do is plug the oft in, put it in first and gas it but when I do that the launch control doesn't engage. What am I doing wrong?

Mine works fine, there's no setting, it's just there preset at like 5.7k. Clutch in, hold, first gear, gas and wamwamwam, lol. To change it you go into RomRaider and adjust I believe.

steve99 · 06-23-2016, 12:34 AM

Quote:

Originally Posted by kingxix

Hey guys I have my car on the oft stage 2 uel tune and I'm trying to find the launch control setting. Now I've heard all you have to do is plug the oft in, put it in first and gas it but when I do that the launch control doesn't engage. What am I doing wrong?

not all oft rom calid have the launch/FFS software patch.

open your tune in romraider using the oft defininition and see in the launch and ffs tbles are in tune.

or else ring the oft guys on phone

Dr. BRZ · 09-01-2016, 03:44 PM

i think its time you upload a video showing how to edit launch control @Shiv@Openflash !!

everythingsablur · 09-01-2016, 05:32 PM

Quote:

Originally Posted by Dr. BRZ

i think its time you upload a video showing how to edit launch control @Shiv@Openflash !!

Isn't it just:

Open RomRaider
Open a ROM file to edit that works on the calid of your car
Go to the Alpha BRZ LC/FFS settings
Edit Launch Control Delta RPM
Change value to xxxx (where 7600 - xxxx = your desired LC RPM)
Save
Copy to OFT
Plug into car and flash like any other ROM

06-04-2015, 12:00 AM	#102
einrejosh Senior Member Join Date: Feb 2014 Drives: 2014 Scion FR-S Location: Fremont, Ca Posts: 109 Thanks: 18 Thanked 37 Times in 26 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	Bump. With the new V2 OTS tunes do we have to wait for the new XML files for the V2 OTS tunes to get LC/FFS? Because I understand that i'd have to use a V1.x tune with the XML V1.x files to get LC/FFS, but I just don't want to considering the V2 is the most updated. __________________ My Members Journal

06-22-2015, 08:32 PM	#104
D_Thissen Senior Member Join Date: Jan 2014 Drives: '13 Argento FR-S (Sold) Location: Ontario Posts: 2,126 Thanks: 3,209 Thanked 1,439 Times in 855 Posts Mentioned: 19 Post(s) Tagged: 2 Thread(s)	Neeeeat! Thanks Shiv! [ame]http://www.youtube.com/watch?v=DqqicIWZrO4&sns=em[/ame] __________________ My FR-S Build IG: dthissen Last edited by D_Thissen; 06-22-2015 at 08:43 PM.

06-22-2016, 10:11 PM	#108
kingxix Junior Member Join Date: Jun 2016 Drives: 2015 Subaru BRZ Location: Palmdale ca Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Launch Control Hey guys I have my car on the oft stage 2 uel tune and I'm trying to find the launch control setting. Now I've heard all you have to do is plug the oft in, put it in first and gas it but when I do that the launch control doesn't engage. What am I doing wrong?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet	Rombinhood@OpenFlash	Software Tuning	1838	07-29-2023 06:35 PM
Is Openflash tablet detectable?	Boofneenee	Software Tuning	25	05-02-2014 10:03 PM
WTB Openflash Tablet	Vlady	Want-To-Buy Requests	0	10-25-2013 12:10 AM
racerom flat foot shifting	ft86me	Engine, Exhaust, Transmission	10	07-25-2013 03:02 PM
EcuTek RaceRom Flat Foot Shifting !	Visconti	Engine, Exhaust, Transmission	79	11-14-2012 09:36 PM

03-03-2015, 12:33 AM	#101
scarfo Senior Member Join Date: Jan 2013 Drives: gts 86 Location: australia Posts: 136 Thanks: 12 Thanked 23 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	anymore word about this, im on the DOOG rom still nothing as of yet( altough its a new rom)

07-30-2015, 09:57 PM	#105
poolboy54 Member Join Date: Apr 2014 Drives: Scion FRS. Silver with black badges Location: Texas Posts: 25 Thanks: 2 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Do the same concept apply to the v2.067? I want launch control at 3k. So 7600-4600=3000, I did that but when I put the tune on my car. It started then died...

07-31-2015, 07:59 AM	#107
poolboy54 Member Join Date: Apr 2014 Drives: Scion FRS. Silver with black badges Location: Texas Posts: 25 Thanks: 2 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks

User Name		Remember Me?
Password