follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > 1st Gens: Scion FR-S / Toyota 86 / Subaru BRZ > Scion FR-S / Toyota 86 GT86 General Forum

Scion FR-S / Toyota 86 GT86 General Forum The place to start for the Scion FR-S / Toyota 86 | GT86


User Tag List
go_a_way1, MisterSheep

Reply
 
Thread Tools Search this Thread
Old 07-29-2017, 09:57 PM   #17207
SuperTom
Senior Member
 
SuperTom's Avatar
 
Join Date: Feb 2014
Drives: C5 Corvette, '17 Toyota 86, Jeep XJ
Location: New Castle DE
Posts: 1,500
Thanks: 1,433
Thanked 914 Times in 528 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by JDM_inspired View Post
According to HKS HERE the "Premium" is louder than the "Sport". I also have the Legamax Premium so I figure that it might sound a bit more aggressive than the one in the video after I get it installed
well its louder and higher pitched. I like the deeper sound of the sport. But its gotten better after a 1000 miles
__________________
SuperTom is offline   Reply With Quote
Old 07-30-2017, 03:07 AM   #17208
zeal86
Senior Member
 
zeal86's Avatar
 
Join Date: Jul 2014
Drives:
Posts: 1,947
Thanks: 1,149
Thanked 1,773 Times in 872 Posts
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Sorry for the Picture overload....

From my Saturday Hangar Shoot...













































__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Last edited by zeal86; 08-01-2017 at 07:06 PM.
zeal86 is offline   Reply With Quote
The Following 11 Users Say Thank You to zeal86 For This Useful Post:
Astroboy (07-30-2017), carsebuco (07-30-2017), dhuang (07-31-2017), humfrz (07-30-2017), Is Always Angry (07-30-2017), MJones_RB (07-31-2017), OrangeGuitar (07-30-2017), Overdrive (07-30-2017), Raven86Project (07-30-2017), SuperTom (07-30-2017), trvth (08-01-2017)
Old 07-30-2017, 08:31 PM   #17209
Overdrive
Sittin' Sideways
 
Overdrive's Avatar
 
Join Date: Nov 2016
Drives: 2016 Toyota FR-S
Location: United States
Posts: 830
Thanks: 885
Thanked 530 Times in 342 Posts
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Garage
Mmmmmmmm....hangar.
__________________
-O/D
2016 FR-S, Hot Lava
Overdrive is offline   Reply With Quote
Old 07-31-2017, 07:41 AM   #17210
wolverenz
Junior Member
 
wolverenz's Avatar
 
Join Date: Jun 2017
Drives: Toyota GT86
Location: Las Vegas
Posts: 7
Thanks: 0
Thanked 22 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by SuperTom View Post
Very nice fitment
Thank you! Glad it turned out nice.
Quote:
Originally Posted by MJones_RB View Post
Those black rims look absolutely evil with that color car. Nice!
Thanks man, I know it looks black but the color is actually called Gun Blue, its basically like blue-ish space gray.
wolverenz is offline   Reply With Quote
Old 07-31-2017, 07:55 AM   #17211
15limited
Senior Member
 
15limited's Avatar
 
Join Date: Apr 2015
Drives: BRZ
Location: PNW
Posts: 387
Thanks: 456
Thanked 150 Times in 113 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by zeal86 View Post
Sorry for the Picture overload....

From my Saturday Hangar Shoot...









































__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix
Which harness bar is that, beatrush?

Sent from my 2PQ93 using Tapatalk
__________________
Perrin Transmission Bolt, Drift Button,Intake Tube, Radiator Hoses, Engine Mounts, Gurney Flap Diode Dynamics Always On Module OLM 3k HID Foglights GCS Smoked Side Markers Motul Gear 300/300 V OE Acantara arm rest Password JDM Dry Carbon rear diffuser Rally Armour Mud flaps H.I.C side & rear visor Gruppe-S UEL header/OP HKS Front Pipe Leg Sport Cat Back Koyorad aluminum radiator Wheelhaus CF low pro 3rd brake light Toms JDM Clear Tail Lamps
15limited is offline   Reply With Quote
Old 07-31-2017, 08:53 AM   #17212
Ashikabi
Senior Member
 
Ashikabi's Avatar
 
Join Date: Aug 2014
Drives: 2013 FR-S
Location: Northwest Iowa
Posts: 7,354
Thanks: 454
Thanked 4,542 Times in 2,947 Posts
Mentioned: 59 Post(s)
Tagged: 5 Thread(s)
Quote:
Originally Posted by 15limited View Post
Which harness bar is that, beatrush?

Sent from my 2PQ93 using Tapatalk
Pretty sure it's the Essex painted beatrush gold
Ashikabi is offline   Reply With Quote
The Following User Says Thank You to Ashikabi For This Useful Post:
zeal86 (07-31-2017)
Old 07-31-2017, 09:05 AM   #17213
zeal86
Senior Member
 
zeal86's Avatar
 
Join Date: Jul 2014
Drives:
Posts: 1,947
Thanks: 1,149
Thanked 1,773 Times in 872 Posts
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by 15limited View Post
Which harness bar is that, beatrush?

Sent from my 2PQ93 using Tapatalk
Exactly what @Ashikabi replied... the Essex harness bar painted Beatrush gold... it is of exceptional quality...I would definitely recommend it if you're looking for one.





__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix
zeal86 is offline   Reply With Quote
Old 07-31-2017, 01:19 PM   #17214
KDad2
Senior Member
 
KDad2's Avatar
 
Join Date: Jan 2014
Drives: 2013 Raven
Location: Texas
Posts: 485
Thanks: 202
Thanked 345 Times in 183 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
I hit a semi truck tire on the way to work today. There was no time to avoid it without causing a wreck or more damage to the car. Bent up my bumper real bad. That was the first thing to pop back into place and reattach just to get home. The impact also pushed in the grill so that it was loose and bent the license plate in half. Also, my bumper is cracked and has a hole where the end of the crash beam passenger side is located. It was actually sticking out of the hole. Tore up my under panel pretty good. Luckily no damage that I can see to the radiator. I was able to get the car on jack stands and put the bumper back on after removing what was left of some damaged clips. I'm glad I have extra clips. For most of the front skid plate I was able to drill holes and use zip ties to stitch it back together. Some tabs are broken on the bumper and used some more zip ties there. It could of been worse and I'll probably take it in to have it inspected for more damage. So, at this point, I can replace with an OEM bumper, upgrade to a custom bumper, patch the hole and use rattle can touch up, or just slap a sticker on it and be done. As a daily driver, it has a lot of road rash on it. I'm leaning more towards patch and touch-up paint, or a sticker to cover the damage.
KDad2 is offline   Reply With Quote
The Following User Says Thank You to KDad2 For This Useful Post:
MJones_RB (07-31-2017)
Old 07-31-2017, 02:17 PM   #17215
Dadhawk
1st86 Driver!
 
Dadhawk's Avatar
 
Join Date: Feb 2012
Drives: '13 FR-S (#3 of 1st 86)
Location: Powder Springs, GA
Posts: 19,798
Thanks: 38,786
Thanked 24,907 Times in 11,362 Posts
Mentioned: 181 Post(s)
Tagged: 4 Thread(s)
Quote:
Originally Posted by KDad2 View Post
I hit a semi truck tire on the way to work today. There was no time to avoid it without causing a wreck or more damage to the car. Bent up my bumper real bad. .
By bumper, I assume you mean bumper cover. If you hit hard enough to do that much damage to the cover, there are pretty good odds you have damage to the structure you aren't seeing. You will definitely want to have it checked.

See my owner's journal towards the end, but I had a minor incident with no damage to the cover other than being knocked off and one little gouge. Underneath though the fender supports and the bumper bar were bent.

Check your hood lines for weird gaps. That's how I first noticed further damage to mine.

Glad you are OK!
__________________

Visit my Owner's Journal where I wax philosophic on all things FR-S
Post your 86 or see others in front of a(n) (in)famous landmark.
What fits in your 86? Show us the "Junk In Your Trunk".
Dadhawk is offline   Reply With Quote
The Following User Says Thank You to Dadhawk For This Useful Post:
OrangeGuitar (07-31-2017)
Old 07-31-2017, 02:27 PM   #17216
KDad2
Senior Member
 
KDad2's Avatar
 
Join Date: Jan 2014
Drives: 2013 Raven
Location: Texas
Posts: 485
Thanks: 202
Thanked 345 Times in 183 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by Dadhawk View Post
By bumper, I assume you mean bumper cover. If you hit hard enough to do that much damage to the cover, there are pretty good odds you have damage to the structure you aren't seeing. You will definitely want to have it checked.

See my owner's journal towards the end, but I had a minor incident with no damage to the cover other than being knocked off and one little gouge. Underneath though the fender supports and the bumper bar were bent.

Check your hood lines for weird gaps. That's how I first noticed further damage to mine.

Glad you are OK!

Thanks,
Yes, I am ok. And, I meant bumper cover. Also, that's a good idea to check the hood lines. I'll be sure to do that this evening and schedule to have it inspected.
KDad2 is offline   Reply With Quote
Old 08-01-2017, 05:12 PM   #17217
Raven86Project
JDM Spirit of the '90s
 
Raven86Project's Avatar
 
Join Date: Dec 2016
Drives: 2015 FR-S Turbo
Location: South Florida
Posts: 303
Thanks: 321
Thanked 474 Times in 208 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
My new custom gauge faces


For more info and pictures go to my build thread
__________________
IG: raven86project
Build Thread HERE

Raven86Project is offline   Reply With Quote
The Following 9 Users Say Thank You to Raven86Project For This Useful Post:
Juan_Ri (08-01-2017), Kairo (08-08-2017), Kiibiiin (08-04-2017), Lorico (08-03-2017), MJones_RB (08-04-2017), OrangeGuitar (08-01-2017), Overdrive (08-01-2017), stranger things (08-01-2017), zeal86 (08-01-2017)
Old 08-01-2017, 11:46 PM   #17218
zeal86
Senior Member
 
zeal86's Avatar
 
Join Date: Jul 2014
Drives:
Posts: 1,947
Thanks: 1,149
Thanked 1,773 Times in 872 Posts
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Today I recorded the following video of my third Red Intake Manifold Cover Prototype . I've decided to polish it first...if the Devcon I used to fill the gaps doesn't look good after I polish it, I'll have it painted. It will serve as my temp until I complete my final version. Afterwards I plan on selling it if anyone is interested.

The following pics in the link above are pre Devcon but illustrate the fitment of this third prototype. The temporary top hardware will change to a countersunk hex head bolt.

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix
zeal86 is offline   Reply With Quote
Old 08-03-2017, 01:38 PM   #17219
zeal86
Senior Member
 
zeal86's Avatar
 
Join Date: Jul 2014
Drives:
Posts: 1,947
Thanks: 1,149
Thanked 1,773 Times in 872 Posts
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Today I finished Sanding my custom red intake manifold cover prototype to 2000 grit and then proceeded to polish it with Flitz metal polish to get an idea what it will look like when fully polished.

I still need to finish polishing it using white rouge and a buffing wheel... Should really be blinging soon!













__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix
zeal86 is offline   Reply With Quote
The Following User Says Thank You to zeal86 For This Useful Post:
MJones_RB (08-04-2017)
Old 08-03-2017, 09:56 PM   #17220
mpross
Senior Member
 
mpross's Avatar
 
Join Date: Mar 2016
Drives: 2015 Scion FRS
Location: Naperville
Posts: 104
Thanks: 33
Thanked 50 Times in 29 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Garage
Installed an invidia catless unresonated FP and really like it. Compliments my Greddy Revolution RS catback nicely




Sent from my iPhone using Tapatalk
mpross is offline   Reply With Quote
 
Reply

Tags
:popcorn:, :popcorn: funny tags, nsfc, rice rice baby

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Saw My First FR-S Today Marrk Scion FR-S / Toyota 86 GT86 General Forum 26 05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81 Juanito08 Scion FR-S / Toyota 86 GT86 General Forum 7 05-22-2012 04:54 PM
If my FRS was here already, today I would... bestwheelbase Scion FR-S / Toyota 86 GT86 General Forum 101 05-12-2012 06:20 PM
Sat in a FRS today!! Ladnerd Scion FR-S / Toyota 86 GT86 General Forum 12 04-30-2012 01:48 PM
Got my VIN today... Enemies BRZ First-Gen (2012+) -- General Topics 63 04-12-2012 10:19 PM


All times are GMT -4. The time now is 05:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.