BRZEdit (ECUEdit)

[epifan]

Some of latest factory bins included in brzEdit ECUs pack, including ZA1JA00C.
Pro version users can dump ECU bins for collect ECUs pack

Originally Posted by Foobar

I presume from some of the screenshots that other members have posted that the factory files you're providing are the original ones that don't include Subaru's latest TSB fix. Any chance you have the files available for the latest factory reflash? That's ZA1JA00C for USDM 6MT, for instance.

[jedibow]

If I read your website correctly, the only way to locate, identify, and edit new maps within the edu is if you have the "pro" tuning kit?

Forgive me for my ignorance.

George

[mad_sb]

Originally Posted by jedibow

If I read your website correctly, the only way to locate, identify, and edit new maps within the edu is if you have the "pro" tuning kit?

Forgive me for my ignorance.

George

I don't believe that is correct. Even with EcuFlash, the process of finding new maps does not involve ecuflash... testing them does, but finding is normally done with a dis-assembly program not the editor program itself.

I'm fairly sure The personal and pro versions will updated as new maps are found. And of course if you find a new map via whatever means, if you email the data to Epifan, I'm sure he will make it available via a program update.

The personal version was just released this week and there have already been two updates published.

[epifan]

With Pro version you have access to raw ECU bin using internal HEXViewer tool. So you can get access to all possible maps (1700+) and create defs for them.

Originally Posted by jedibow

If I read your website correctly, the only way to locate, identify, and edit new maps within the edu is if you have the "pro" tuning kit?

[86drift]

Originally Posted by epifan

Some of latest factory bins included in brzEdit ECUs pack, including ZA1JA00C.
Pro version users can dump ECU bins for collect ECUs pack

Welcome to the forum! It's good to have vendors on to help answer questions.

Hopefully the admins will set up a setup a sub-category for tuning because there's going to be a lot of questions and interest in this stuff.

[xjohnx]

Originally Posted by epifan

With Pro version you have access to raw ECU bin using internal HEXViewer tool. So you can get access to all possible maps (1700+) and create defs for them.

Does that mean owners of the Pro version could theoretically read maps flashed by ecutek tuners?

[brzEdit]

No, Ecutek maps will carry a proprietary encryption applied to them. So I doubt you will be able to ready them using our software.

[ft_sjo]

Can you read the OEM cal with this?

[epifan]

Yes, in special "dump" format using Pro version only

Originally Posted by ft_sjo

Can you read the OEM cal with this?

[ft_sjo]

Originally Posted by epifan

Yes, in special "dump" format using Pro version only

Thanks. Do you have the latest UK cal with the idle fix in it?

[epifan]

Yes

Originally Posted by ft_sjo

Thanks. Do you have the latest UK cal with the idle fix in it?

[xjohnx]

Originally Posted by brzEdit

No, Ecutek maps will carry a proprietary encryption applied to them. So I doubt you will be able to ready them using our software.

Thanks.

For the record, i was just asking to make sure those guys were safe. I wouldn't know what to do with the rom even if i had it.

[ft_sjo]

Originally Posted by epifan

Yes

Thanks, and could you also please confirm if realtime map tracing is enabled for all x/y tables and datalogging?

[epifan]

Originally Posted by ft_sjo

Thanks, and could you also please confirm if realtime map tracing is enabled for all x/y tables and datalogging?

Yes, sure. This is standard feature of all ecuEdit-based products