NORCAL: Local Marketplace Buy/Sell

[kuczynskika]

BUMP

Originally Posted by kuczynskika

Putting feelers out there. I haz two things that may interest some of you.

1. Cosworth Stage 1.1 Catback Exhaust (only problem is aesthetic - cracking tips. Can easily be welded and repaired if one was so inclined)
Price: $900





2. WRX STi option wheels (18x8.5 et. 55) with conversion spacers (5x100 to 5x114.3) fitment with the spacers is impeccable and you can run a 245 tire. Get the STi look and still run some meaty rubber!
Price $1200



Let me know, no hurry to sell.

[F R YESS]

Originally Posted by F R YESS

FS:

Invidia N1 Stainless Tips with silencers great shape less than 10k miles - 400



Greddy SP Elite Axleback great shape; less than 15k miles - 275



TRD Drop In Air Filter some wear from being stored; not installed - 30



Willing to throw in filter w/ either exhaust.

Located in Dublin. Please PM. Thanks!



Sent from my iPhone using Tapatalk

All are SOLD!


Sent from my iPhone using Tapatalk

[AFRichZC6]

SOLD

I purchased these wheels from a friend who was the original owner of them. I'm only selling these because I've moved into the STX class so I'm on new 17x9 wheels now. These have only been used for Street Class autocross events on FRS/BRZ. If you're looking for unique, lightweight wheels to compete in D Street in your 86, FRS, or BRZ that aren't Enkei RPF1 that everybody else has, these are for you! As far as I know, this spec has been discontinued for a couple years now.

These are the more rare "SF Challenge" version of the P1 Racing model so it has a lower, +42 offset than normal. SCCA Solo Street Class rules allow for an offset deviation of ±7mm. Stock is +48 so these will get you about as low an offset as you can get without installing extended wheel studs and spacers. They weigh about 17 lbs each, and center caps (installed) and additional wheel decals (pictured) are included. If you're looking to install on your own FRS, BRZ, or Toyota 86, I can include a set of hubcentric rings.

They were refinished and powdercoated by Nick at RMS in Fremont just last year. There are no bends, flat spots, or curb rash. There are just a few minor blemishes from cone marks during autocross and from tire mounting, but they are not very noticeable.

Price: $500

[phanguy]

Originally Posted by phanguy

Hi all. Finally cleaning stuff out. I'll list everything I'm selling, but will only post the appropriate pictures depending on the sub-forum. All items are used unless otherwise noted. Shipping included. Here we go!

Red Perrin Inlet $100 SOLD
Red Perrin Radiator Kit(New/unused) $90
Perrin Rear Shifter Bushing(New/unused) $20 SOLD
Stock Antenna $25
Faux/fake TRD shifter(New/unused) $15 SOLD
Stock rearview mirror $25
Homelink mirror(the bracket on this is for a Tacoma so it won't fit exactly...) $60 SOLD
Stock FR-S stereo $50
Driver and passenger window controls (white led swap) $25 each or $40 for both
Traction control buttons (white led swap) $20
Stock HVAC(I believe one or both bulbs are burnt out) $60
Stock Primacy tire $50 SOLD
Stock rims (They were plastidipped when i bought them, but they were banged up pretty bad during shipping. I tried to clean one off, but gave up.) $100

http://i.imgur.com/IscdVrK.jpg?1

http://i.imgur.com/fZTymBh.jpg?1

http://i.imgur.com/VqfrA22.jpg

http://i.imgur.com/vBy0CKE.jpg


http://i.imgur.com/ooiNY1u.jpg
http://i.imgur.com/u03dyOY.jpg



http://www.ft86club.com/forums/showthread.php?t=111260
http://www.ft86club.com/forums/showthread.php?t=111261
http://www.ft86club.com/forums/showthread.php?t=111262
http://www.ft86club.com/forums/showthread.php?t=111263
http://www.ft86club.com/forums/showthread.php?t=111264

BUMP BUMP BUMP

[Shaun Perry]

*** TAKE $100 OFF THE EXHAUST/COILS/WHEELS&TIRES. MOTIVATED TO SELL,
MAKE AN OFFER, I NEED THEM GONE***

1. 100% custom 2.5" center exit/dual stainless steel 3" tips cat-back exhaust w/ a 22" Magnaflow Straight muffler and flex joint right after the end of the front pipe $500 AVAILABLE





2. RSR black-i coilovers 6k miles $1400 obo AVAILABLE





3. Rota torque white 17x9 +30 offset with Bridgestone Potenza S-04 Pole position 245/45/17 with tredwear white lettering tire tread is very healthy, less than 10k miles $800 obo AVAILABLE







4. Depo 2in1 boost and oil temp gauge $80 AVAILABLE

5. Aem afr gauge $120 AVAILABLE

6. Cravenspeed 2-pod gauge flex mount $100 AVAILABLE

*5,6,7 take for $220

7. Rally Armor Mud Flaps in Red w/ white lettering $90 AVAILABLE

TEXT ME 510-377-8981, E-MAIL: SHAUN.DEGUIA@GMAIL.COM

[Clipdat]

@thecarfilmer

Originally Posted by FR-Sky

Test Water:
Want to trade my Greddy SP cat back for Greddy RS single exit cat back exhaust.
About 5000+/- miles, 0 drone 0 rasp pure exhaust sound<<Greddy did a very good job.
Currently still on the car, if you can swap it. It is a plus. I can travel around the bay area. Reason for trade because wanted a different setup and weight reduction purpose for track. Thanks!

http://www.ft86speedfactory.com/gred...l#.WPZ9yIgrLcc

[FR-Sky]

Originally Posted by Clipdat

@thecarfilmer

I asked nick, he doesnt want it haha thanks~~

[MisterSheep]

For sale.

Rays Gramlight 57xtremes in 18x8.5+33 and 18x9.5+40 with practically new Yokohama AD08R tires. 1 tire is currently blown on the rear and is in the process of being replaced. Front tires at 235/40/18 rear are 255/35/18. One of the rear wheels has some curb rash with a small blemish on one of the spokes.

I ran this setup for over a year and worked great with stock suspension and was actually able to get up to -2.5 degrees of negative camber up front with no rubbing.

Tires are very nice.. and expensive.

Send me a PM if you want any other information or pictures.

Looking for $1400 for everything. $1000 for just wheels.

[nstymatt]

Looking for stock suspension lmk what you have!

[Rplnsh]

Originally Posted by nstymatt

Looking for stock suspension lmk what you have!

Ive got it but it has RSR superdown springs installed. I do have the stock springs as well.

[nstymatt]

Originally Posted by Rplnsh

Ive got it but it has RSR superdown springs installed. I do have the stock springs as well.

PMd!

[huhu89151734]

Need a set of 2017 OEM suspension please PM with price and mileage.

Also selling: OEM BRZ head unit( the older 2012-2016 ones) $20 has a scratch on the screen.

OEM original diffuser I bought new with the car. Used for 20k miles and took it off. $50

[Maddumpling]

Originally Posted by Tofurky

Part Out
Located in Emeryville, CA
Velox Motorsports Front Splitter w/ Endplates 375
Velox Motorsports Rear Diffuser 375
Carbon SARD Rep Wing w/ Custom Brackets to fit with TRD Wing 475
Openflash Tablet SOLD
TRD Canards 100
Works Bell Hub and Quick Release with Personal Steering Wheel 450
XXR 531 17x8.25 with 225/40/17 Hankook Ventus RS3 375
Unknown Side Splitters and Rear Spats 80 (will not separate)
Gruppe-S Header 200 plus stock header (I will not be doing the swap/pay for it)
All prices are firm

Pmed.

[Shaun Perry]

BUMP

Take $100 off the exhaust/coils/wheels&tires. Need these gone! Make me an offer!

1. 100% custom 2.5" center exit/dual stainless steel 3" tips cat-back exhaust w/ a 22" Magnaflow Straight muffler and flex joint right after the end of the front pipe $500 AVAILABLE





2. RSR black-i coilovers 6k miles $1400 obo AVAILABLE





3. Rota torque white 17x9 +30 offset with Bridgestone Potenza S-04 Pole position 245/45/17 with tredwear white lettering tire tread is very healthy, less than 10k miles $800 obo AVAILABLE







4. Depo 2in1 boost and oil temp gauge $80 AVAILABLE

5. Aem afr gauge $120 AVAILABLE

6. Cravenspeed 2-pod gauge flex mount $100 AVAILABLE

*5,6,7 take for $220

7. Rally Armor Mud Flaps in Red w/ white lettering $90 AVAILABLE

TEXT ME 510-377-8981, E-MAIL: SHAUN.DEGUIA@GMAIL.COM