|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
05-19-2023, 06:23 AM | #1 |
Senior Member
Join Date: Apr 2019
Drives: 86 GT
Location: Malaysia
Posts: 358
Thanks: 218
Thanked 205 Times in 105 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Greddy water-cooled oil cooler kit
Greddy has released a kit for the GR86/BRZ that routes the coolant to a core before going back into the OEM regulator.
https://store.shopping.yahoo.co.jp/m...-12015700.html I'd suppose at that price point, one would just opt for an air-to-oil cooler but what would be the advantages of this setup? At the top of my head is that coolant is cheaper than oil and with the reduced risk of spilling oil.
__________________
DIY stuff at Compelica Works
|
05-19-2023, 08:21 AM | #2 |
Airborne at your service
Join Date: Sep 2014
Drives: '17 BRZ Series.Yellow
Location: El Paso, Texas
Posts: 6,325
Thanks: 4,528
Thanked 5,586 Times in 2,928 Posts
Mentioned: 33 Post(s)
Tagged: 2 Thread(s)
|
Looks like a glorified Cusco oil cooler. Interesting idea and could have some advantages. But I think most would either do the Forester XT retrofit or just get an air oil cooler.
__________________
|
The Following User Says Thank You to weederr33 For This Useful Post: | Teseo (05-25-2023) |
05-19-2023, 08:55 AM | #3 |
Senior Member
Join Date: Nov 2017
Drives: 17 BRZ ,21 GR Yaris, 23 GR86
Location: Poland
Posts: 150
Thanks: 395
Thanked 134 Times in 77 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I'm wondering how effective it really is. I like the idea because it eliminates thermostatic plate and spacer from the equation.
|
05-19-2023, 09:08 AM | #4 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,196
Thanks: 500
Thanked 1,066 Times in 775 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
|
|
05-19-2023, 09:56 AM | #5 | |
Anti stance.
Join Date: Feb 2016
Drives: 17 White 860. RCE Tarmac 2. RE-71RS
Location: Not Canada
Posts: 1,629
Thanks: 897
Thanked 956 Times in 546 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
05-19-2023, 12:20 PM | #6 |
Rust bucket enthusiast
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 3,932
Thanks: 3,199
Thanked 4,095 Times in 2,045 Posts
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
|
Maybe they're trying to give an additional buffer to the temp by adding an additional coolant core, rather than increasing potential oil pressure drop with an external cooler and lines.
Anyone who has the existing solution could add a radiator in-line to see what difference it makes. Very much interested
__________________
Turbo FR-S Build - Build Thread
JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block |
05-19-2023, 12:32 PM | #7 |
Member
Join Date: Dec 2016
Drives: 2013 FR-S 6 spd in Halo
Location: San Diego
Posts: 81
Thanks: 10
Thanked 69 Times in 34 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I thought these bullet points spoke volumes:
・Although it is a specification that assumes street use, it has been repeatedly tested at the circuit and commercialized. This item is recommended for those who are concerned about the oil temperature rising during sports driving on the street or winding roads. ・Please install the air-cooled GReddy Oil Cooler Kit Standard ZN8/ZD8 10-stage Circuit Spec (CODE: 12014641) when performing continuous laps or drifting |
The Following 3 Users Say Thank You to Spairo For This Useful Post: |
05-21-2023, 08:32 PM | #8 |
Member
Join Date: Aug 2022
Drives: Don't yet have a Toyobaru
Location: USA
Posts: 21
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Don't the 2nd gens have a similar system?
|
05-24-2023, 12:26 AM | #9 | |
Senior Member
Join Date: Apr 2019
Drives: 86 GT
Location: Malaysia
Posts: 358
Thanks: 218
Thanked 205 Times in 105 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
2nd gens only have the regulator.
__________________
DIY stuff at Compelica Works
|
|
05-24-2023, 09:06 AM | #10 |
Anti stance.
Join Date: Feb 2016
Drives: 17 White 860. RCE Tarmac 2. RE-71RS
Location: Not Canada
Posts: 1,629
Thanks: 897
Thanked 956 Times in 546 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Coolant only runs through the core when the thermostat is opened. It will definitely warm up the oil.
Last edited by Tokay444; 05-24-2023 at 09:22 AM. |
05-24-2023, 10:44 AM | #11 |
Senior Member
Join Date: Apr 2019
Drives: 86 GT
Location: Malaysia
Posts: 358
Thanks: 218
Thanked 205 Times in 105 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
How the coolant warms the oil is via the regulator... but if the coolant now has to circulate thru the core, that wouldn't warm the oil as fast as previously since colder coolant will now go to the regulator?
__________________
DIY stuff at Compelica Works
|
05-25-2023, 07:22 AM | #12 |
Senior Member
Join Date: Jun 2014
Drives: frs
Location: Gunsai
Posts: 4,877
Thanks: 7,146
Thanked 2,922 Times in 1,769 Posts
Mentioned: 23 Post(s)
Tagged: 2 Thread(s)
|
For the price, you could get the radiator/oil cooler from Jackson
|
05-29-2023, 07:54 PM | #13 |
Member
Join Date: Aug 2022
Drives: Don't yet have a Toyobaru
Location: USA
Posts: 21
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB jackson racing oil/water cooler | alphasaur | Want-To-Buy Requests | 4 | 04-25-2022 12:22 AM |
Oil cooled Vs Oil/Water cooled turbos | Joveen | Forced Induction | 20 | 11-12-2020 08:21 PM |
Sold - FS: Forester oil-to-water cooler setup | mkodama | Engine, Exhaust, Bolt-Ons | 12 | 01-19-2019 07:37 PM |
question about water cooled turbos and winter... | jackblack21 | Forced Induction | 2 | 10-22-2015 06:30 PM |
FS Cusco oil cooler (water cooled) | keen as | Australia Classifieds | 10 | 08-31-2014 01:25 AM |