BBK Fitment Database? - Page 12 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

davidog3 · 02-27-2019, 07:30 PM

Does anyone with motegi traklite mr131 17x7 have checked for the AP sprint kit?

Simok · 04-20-2019, 06:51 PM

Am I wrong In assuming that if a bbk clears the oem wheels it will likely clear most after market wheels?

churchx · 04-21-2019, 02:32 AM

Wrong. BBK clearance depends a lot from spoke shape design. Same with not safe to assume if eg. BBK clears some 17", then all 18" should clear.
So just find wheels you like design of, and then check clearance. Find threads here or on BBK vendor product description page if wheels in size you want are among ones that clear, also you can get/download brake clearance templates from most of BBK vendors. Glue on carton, cut template out, check in wheel shop clearance on the wheel. Or send link to template to some online wheel shop and ask for them to check clearance.

onewayracing · 11-19-2019, 05:56 AM

Does anyone know if there are any 17 in wheels that will clear stoptech st22 rear brakes? I only need them to fit the rear since I’m drag racing and need to run drag radials .

byun · 11-19-2019, 11:53 AM

Quote:

Originally Posted by onewayracing

Does anyone know if there are any 17 in wheels that will clear stoptech st22 rear brakes? I only need them to fit the rear since I’m drag racing and need to run drag radials .

Only wheel that might is te37 17x9.5. I had test fit on the front which I have the 355 kit and there was 1-2mm clearance. But wasn’t comfortable running them. Didn’t test the rear but since it’s 345 guessing probably would fit.

Sent from my iPhone using Tapatalk

onewayracing · 11-19-2019, 11:32 PM

Right on man ! Right now I’m running Advan Gt 18x9.5 with 255/35/18 Bridgestone potenza all the way around and I cant launch very well and spins part or second gear. I’m making 355whp . Just in case I can’t get the 17 to fit witch means no Mickey Thompson SS.does any one have recommendations on what brand of tire in 18in is the stickiest and will fit in the rear with out rubbing?

byun · 11-20-2019, 11:34 PM

Quote:

Originally Posted by onewayracing

Right on man ! Right now I’m running Advan Gt 18x9.5 with 255/35/18 Bridgestone potenza all the way around and I cant launch very well and spins part or second gear. I’m making 355whp . Just in case I can’t get the 17 to fit witch means no Mickey Thompson SS.does any one have recommendations on what brand of tire in 18in is the stickiest and will fit in the rear with out rubbing?

Nice, I’m running around 320whp and have the titan7 18x9.5 w/ 255/35 Yokohama A052 for track use. They have tons of grip. I don’t launch my car though.

Sent from my iPhone using Tapatalk

blown · 11-22-2019, 01:59 AM

anyone know if the enkei nt03 clears brembos?

18x9.5+40

Z06ZN6 · 10-02-2021, 11:40 PM

Does anyone have a template for the front PP brembos or know where to find one? I got the aftermarket brembo kit caliper template from racetechnologies but those appear to be different calipers than the PP kit. I need to check clearance on my winter wheels. I went through the PP brembo thread already. Thanks in advance for any info.

tx.pete86_ · 04-06-2023, 12:55 AM

Has anyone tried the stock 17x7 +48 wheels with the front ctsv brembo swap? Would I need 18s to fit or would stocks work with spacers? Thanks.

02-27-2019, 07:30 PM	#155
davidog3 Junior Member Join Date: Jun 2016 Drives: Scion fr-s Location: FLorida Posts: 4 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Motegi Tracklite mr131 Does anyone with motegi traklite mr131 17x7 have checked for the AP sprint kit?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno Database	E92M3Guy	Engine, Exhaust, Transmission	33	04-17-2013 10:20 AM
The Official BRZ Pre-Ordered Database Thread	Zaku	BRZ First-Gen (2012+) -- General Topics	727	03-17-2013 07:29 AM
We should start a dealer BRZ order database	eikond	BRZ First-Gen (2012+) -- General Topics	13	03-01-2012 12:56 PM

04-20-2019, 06:51 PM	#156
Simok Senior Member Join Date: Sep 2014 Drives: 2013 FRS Location: Noho Posts: 159 Thanks: 2 Thanked 12 Times in 11 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Am I wrong In assuming that if a bbk clears the oem wheels it will likely clear most after market wheels?

04-21-2019, 02:32 AM	#157
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,330 Thanks: 693 Thanked 2,081 Times in 1,432 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	Wrong. BBK clearance depends a lot from spoke shape design. Same with not safe to assume if eg. BBK clears some 17", then all 18" should clear. So just find wheels you like design of, and then check clearance. Find threads here or on BBK vendor product description page if wheels in size you want are among ones that clear, also you can get/download brake clearance templates from most of BBK vendors. Glue on carton, cut template out, check in wheel shop clearance on the wheel. Or send link to template to some online wheel shop and ask for them to check clearance.

11-22-2019, 01:59 AM	#162
blown Senior Member Join Date: Sep 2014 Drives: ft86 Location: ft86 Posts: 232 Thanks: 3 Thanked 25 Times in 21 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	anyone know if the enkei nt03 clears brembos? 18x9.5+40

10-02-2021, 11:40 PM	#163
Z06ZN6 Senior Member Join Date: Feb 2020 Drives: 2017 Toyota 86 Location: Los Angeles Posts: 126 Thanks: 39 Thanked 131 Times in 71 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Does anyone have a template for the front PP brembos or know where to find one? I got the aftermarket brembo kit caliper template from racetechnologies but those appear to be different calipers than the PP kit. I need to check clearance on my winter wheels. I went through the PP brembo thread already. Thanks in advance for any info.

04-06-2023, 12:55 AM	#164
tx.pete86_ Junior Member Join Date: Apr 2019 Drives: 2017 Toyota 86 Location: Tx Posts: 8 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Has anyone tried the stock 17x7 +48 wheels with the front ctsv brembo swap? Would I need 18s to fit or would stocks work with spacers? Thanks.

User Name		Remember Me?
Password