|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
03-05-2014, 11:59 AM | #1 |
PROUD OF BOXER
Join Date: Feb 2013
Drives: Raven FR-S
Location: Huntsville, AL
Posts: 668
Thanks: 221
Thanked 356 Times in 169 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Shifter bushing sleeve/bolt tolerance
For those guys that have installed a rear shifter bushing, what was the tolerance between the m8 bolt supplied and the sleeve? I picked up an energy suspension bushing and the tolerances... are... well....... excessive. Is this the case with the perrin or kart boy bushing?
The sleeve diameter reads .385", the bolt reads essentially .315" (8mm). I feel a .070" clearance would allow for a lot of vertical play. im considering picking up 3/8" shoulder bolts to reduce the clearance. Thoughts or suggestions? @FT-86 SpeedFactory would you be able to shed light on this for me?
__________________
|
03-05-2014, 11:53 PM | #2 |
Senior Member
Join Date: Sep 2013
Drives: frs
Location: The depths
Posts: 749
Thanks: 355
Thanked 427 Times in 241 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
The bushing is to keep the bolt from compressing the new shifter bushing. The fact that the bolt isn't snug inside the bushing is inconsequential. The bolt and washer will tighten against the bushing and keep the bushing from sliding around. The bushing will be pressed by the bolt and washer into the surface where the bushing bolts to. You don't have an issue here. Install and enjoy your improved shifter!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
kartboy short shifter and rear shifter bushing install and review. FR-S | UMB FR-S | DIY (Do-It-Yourself) Guides | 21 | 10-18-2014 01:41 AM |
Shifter TSB 03-71-13 v. Perrin Rear Shifter Bushing | swansons | Issues | Warranty | Recalls / TSB | 4 | 02-02-2014 02:27 PM |
Shifter Bushing | Vlady | Want-To-Buy Requests | 1 | 10-29-2013 05:39 PM |
Whiteline transmission bushing and Perrin shifter bushing review. | Superhatch | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 1 | 12-09-2012 08:40 PM |
Does the STI Rear Shifter Bushing fit the BRZ/FRS? | Hanakuso | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 08-27-2012 03:48 PM |