Clutch pedal squeaking when clutch is in motion

[Brz_racer]

So I recently had the engine block replaced on my 14 brz. They also replaced the throwout bearing while they were in there. Recently the clutch pedal has started making a squeaking noise when I press it, but only while the pedal is moving. Makes no difference whether the car is on or off. It sounds something similar to walking in wet flip flops. I took it to the dealer who did the work and they told me the pressure plate fingers are the cause of the noise. I suspect the throw out bearing. Has anyone else here experienced a clutch noise like this? And if so what was the cause.

[NCtoBRZ]

Have somebody listen around the engine bay while you operate the clutch. The first and easiest thing to check is that the push-rod on the slave cylinder is properly greased, it will squeak if dry. If that isn’t it, I would suspect the throw out bearing... but if that is being replaced you might as well replace the whole clutch assembly while the transmission is out.