FI Dyno thread

[mrfish]

- Ron Fish / mrfish
- AVO turbo kit, 8 PSI actuator, 3 bar MAP
- 91 Octane
- 9 PSI (tapers to 7)
- Stock fuel, stock clutch, stock everything else
- I superimposed some generic stock hp/trq lines on the chart for reference

[onzippy]

Automatic transmission

- Force Inducted Kit: AVO 6psi spring
- Fuel Type: 93
- Max Boost: 10.5
- Other Mods: exhaust, MBC
- Tuner: Moto-East (Moto-mike)
- Thread: http://www.ft86club.com/forums/showthread.php?t=66723

[kombatlion]

Kombatlion
Fiebruz Motorsport Turbo kit
91oct + Methanol
12.96psi
3" Fiebruz Overpipe, Front pipe, ultimate racing exhaust, snow meth kit, tuned by Fiebruz Motorsports
358whp With Meth
280whp 91oct

Sent from my SAMSUNG-SM-G900A using Tapatalk

[slowmo]

[ame="http://youtu.be/B1Z0-EJvivw"]http://youtu.be/B1Z0-EJvivw[/ame]

Gtx3076r
Ultimate racing 3 inch full exhaust
Built short block
93 octane
Dw265 lph
Tuner : sam, 1000 dunes dubai

[glamcem]

-glamcem
-Kraftwerks Supercharger (C30-94 )-Tuned by Moto-East - @moto-mike
-92 octane (Chevron)
-Standard size pulley- 9.5 psi (read from Ecu)
-Perrin 2.5" OP, Invidia 2.5" Catless FP, Tsudo 2.5" Catback
-4th gear pulls, 72F degree ambient temps

[protpibe]

- Alex / Protpibe
- AVO Turbo Kit
- 94 Octane
- 10 PSI
- Delicious Tune, 3" Perrin Catback, AVO 2.5" Overpipe, Perrin Cold Air

Put down just under 270 at the wheels today @ 10psi on 94 octane

[charged86]

Vortech super charger kit 2.87 pulley
E85 tune ecutek by @Hal@Dynosty
P&L Header with cat.
custom overpipe
Invidia Front pipe with no cat
Invidia Q300 catback
Perrin crank pulley

Dynojet 375whp and 264 wtrq sae correction 1.02
Dyno Dynamics 340 whp sae correction im not sure

http://www.ft86club.com/forums/showthread.php?t=52811

version 2.0 coming soon.

[ybotspawn]

Hi everyone, long time listener, first time caller.

Matt/Ybotspawn
- Innovate Stage 2 CARB
- 93 Pump Gas
- Stock pully 7~psi
- Installed by Ptuning

[bakerr6]

Originally Posted by charged86

Vortech super charger kit 2.87 pulley
E85 tune ecutek by @Hal@Dynosty
P&L Header with cat.
custom overpipe
Invidia Front pipe with no cat
Invidia Q300 catback
Perrin crank pulley

Dynojet 375whp and 264 wtrq sae correction 1.02
Dyno Dynamics 340 whp sae correction im not sure

http://www.ft86club.com/forums/showthread.php?t=52811

version 2.0 coming soon.

clint told me you were working on a different setup, but wasn't sure how it was changing. We need to catch up. text me haha

[charged86]

Originally Posted by bakerr6

clint told me you were working on a different setup, but wasn't sure how it was changing. We need to catch up. text me haha

ok~

[sw20kosh]

Kevin S. - sw20kosh
- Ptuning GT3076R kit
- 91 oct (green) and 91+torco (red)
- 8 and 11 psi
- Ptuning 3" exhaust, JDL Header
- 4th gear pulls, ~75 degree ambient temps

[chiefshayan]

Originally Posted by sw20kosh

Kevin S. - sw20kosh
- Ptuning GT3076R kit
- 91 oct (green) and 91+torco (red)
- 8 and 11 psi
- Ptuning 3" exhaust, JDL Header
- 4th gear pulls, ~75 degree ambient temps

@jamesm working his magic yet again with our terrible gas in CA

[MAPerformance]

Here is another one.

MAPerformance turbo kit with a GTX3076R
FIC 770 injectors
DW65 fuel pump
Prime flex fuel kit
Full 3" turbo back exhaust

Green line is stock
Red line is 11psi 91 Oct
Blue line is 17psi E85

[protpibe]

Here's a better shot of mine:



In my own inexperience, I guess I let off the throttle early (7200). I'm going to put it on the dyno again and run it to redline