OFFICIAL Torque Android app PID/Misc Thread - Page 47 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Junkwipe · 11-07-2014, 09:52 AM

Here. I think it's all ok like the firts post.
Sorry the first photo have a bad cut and i don't know why

Junkwipe · 11-07-2014, 11:25 AM

Here the second.

Junkwipe · 11-10-2014, 03:29 PM

no one can help me?

Flasher · 11-10-2014, 05:14 PM

Hey guys,

after I came back from vacation I noticed, that the battery in my car was dead. Probably because I left the OBD2 adapter connected for two weeks. After kickstarting the car, no phone can find the bluetooth adapter. It's probably broken (it was a SainSpeed one) and I need a new one. I was happy with the adapter up until now, but I probably should get one, that turns itself off after a while.

Any suggestions?

fika84 · 11-11-2014, 12:22 PM

I want this too. Have you gotten anywhere on it?

Quote:

Originally Posted by G_Rossney

So I know that there are other PIDs that can be configured because you can get this information on the Vbox Lite Data logger. I downloaded the CAN log for a Toyota GT86 and the following are available. However, I have no idea how to figure out get the info I need to setup the PIDs myself. If anyone knows the info or knows how to access it, please let me know.

Would love to get the setup info for Torque Pro;

Gear
Steer angle
Brake Travel
Clutch
WSP FL, FR, RL, RR (I'm gessing this is Wheel speed?)
TRC Mode

The following are in Torque Pro

RPM
Accel
Coolant Temp
Throttle
Oil Temp (thanks to the above)

Astroboy · 11-21-2014, 05:15 PM

Does torque's afr(m) respond correctly with the cars ecu. When ever I do a wot pull with my turbocharged frs it's lowest value reds 12.1

Foobar · 11-21-2014, 05:46 PM

Quote:

Originally Posted by Astroboy

Does torque's afr(m) respond correctly with the cars ecu. When ever I do a wot pull with my turbocharged frs it's lowest value reds 12.1

Mine goes lower than that with a Supercharger.

Sent from my Nexus 5 using Tapatalk

Astroboy · 11-21-2014, 09:25 PM

Quote:

Originally Posted by Foobar

Mine goes lower than that with a Supercharger.

Sent from my Nexus 5 using Tapatalk

Why doesn't mine?

Foobar · 11-22-2014, 06:49 AM

Quote:

Originally Posted by Astroboy

Why doesn't mine?

Dunno, which MAP sensor do you have, and which tune? Maybe MAF scaling is off or something?

Sent from my Nexus 5 using Tapatalk

texasbound972 · 11-22-2014, 11:14 AM

Anyone use the ethanol gauge? Mine doesn't work. Figure it would with the delicious tuning flex fuel kit.

Astroboy · 11-22-2014, 09:33 PM

Quote:

Originally Posted by Foobar

Dunno, which MAP sensor do you have, and which tune? Maybe MAF scaling is off or something?

Sent from my Nexus 5 using Tapatalk

Oem map sensor

Sent from my iPad using Tapatalk

Foobar · 11-22-2014, 10:45 PM

Quote:

Originally Posted by Astroboy

Oem map sensor

Sent from my iPad using Tapatalk

I think the OEM may be your culprit.

Sent from my Nexus 5 using Tapatalk

daiheadjai · 11-24-2014, 03:49 PM

Not sure if this has happened to anyone else:

I had setup the "fuel remaining" PID (2129) exactly as instructed.
It worked - for a time.

Then, I got a new adapter (the old one would drop the BT connection after a few minutes) and now I can't get the fuel remaining function to work anymore.
I've even deleted it and reinstalled - no dice.

Anyone run into this issue?

Thanks!

fika84 · 11-26-2014, 11:05 AM

Quote:

Originally Posted by Junkwipe

Here the second.

Did you ever get this working? It might be your equation. You have "AC-40" and I think it should be "A*C-40".

11-07-2014, 09:52 AM	#645
Junkwipe Member Join Date: Sep 2013 Drives: Toyota Gt86 Location: Italy Posts: 43 Thanks: 11 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here. I think it's all ok like the firts post. Sorry the first photo have a bad cut and i don't know why Attached Images Last edited by Junkwipe; 11-07-2014 at 11:24 AM.

11-07-2014, 11:25 AM	#646
Junkwipe Member Join Date: Sep 2013 Drives: Toyota Gt86 Location: Italy Posts: 43 Thanks: 11 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here the second. Attached Images

11-10-2014, 05:14 PM	#648
Flasher Smartass Join Date: Jan 2013 Drives: Toyota GT86 & Impreza STi Location: Germany Posts: 104 Thanks: 60 Thanked 17 Times in 10 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Hey guys, after I came back from vacation I noticed, that the battery in my car was dead. Probably because I left the OBD2 adapter connected for two weeks. After kickstarting the car, no phone can find the bluetooth adapter. It's probably broken (it was a SainSpeed one) and I need a new one. I was happy with the adapter up until now, but I probably should get one, that turns itself off after a while. Any suggestions? __________________ Toyota GT86, Leather, JBL-Sound, Aero-Kit, inferno orange MODS \|O.Z Leggera 18 x 8,5\|Front:Tarox B32\|Rear:OEM+EBC GreenStuff\|Braided Lines\|Milltek CAT-Back & Overpipe\|Motiv Concepts catted Frontpipe\| AVO Turbo\|AVO breather tank\|Mishimoto Oilcooler\|Exedy Stage 1 Clutch\|BeatSonic Sharkfin\|TRD Ducktail\|TRD Aero cover\|Valenti blinker

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque app for android question	Brody602	Electronics \| Audio \| NAV \| Infotainment	8	01-08-2015 04:53 PM
Torque for Android	Freeman	Scion FR-S / Toyota 86 GT86 General Forum	7	11-22-2012 11:05 PM
Android Torque app questions	Craig	Engine, Exhaust, Transmission	1	11-12-2012 04:14 PM
Bluetooth OBD scanner and Android Torque - less than 25 shipped	whataboutbob	Engine, Exhaust, Transmission	7	10-20-2012 01:15 PM
Android Tablet + torque	CharlieChaos	Electronics \| Audio \| NAV \| Infotainment	3	10-04-2012 08:23 PM

11-10-2014, 03:29 PM	#647
Junkwipe Member Join Date: Sep 2013 Drives: Toyota Gt86 Location: Italy Posts: 43 Thanks: 11 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	no one can help me?

11-24-2014, 03:49 PM	#657
daiheadjai Senior Member Join Date: Feb 2012 Drives: 2003 S2000, 2008 Fit Location: Toronto, ON, Canada Posts: 1,990 Thanks: 2,584 Thanked 1,154 Times in 688 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Not sure if this has happened to anyone else: I had setup the "fuel remaining" PID (2129) exactly as instructed. It worked - for a time. Then, I got a new adapter (the old one would drop the BT connection after a few minutes) and now I can't get the fuel remaining function to work anymore. I've even deleted it and reinstalled - no dice. Anyone run into this issue? Thanks!

User Name		Remember Me?
Password