Saskatchewan Thread

[JPxM0Dz]

^^^This is exactly what I suggested he do to begin with
I knew there was more to this story than Jason was posting. As I mentioned earlier, you need to send Moto-East a data log and do the proper research
@frs baby Please work this matter out directly with Moto-East instead slamming their good reputation

[Xero-Limit]

We take our reputation seriously because that's what sets us apart from a lot of the other folks that don't know the 86 platform like we do. Fortunately one of our customers clued us in as to this thread (and the facebook posts).

Originally Posted by frs baby

cars now going again no thanks to moto east with everything they sent me i couldve blown up car they sent me a horrible start up tune cameron from lightspeed took over the laptop and remotely fixed everything got the car to start put a safe base map for ne to get to red deere and properly tune the car

If you have beef with us please back up what you have posted here and elsewhere. You ordered a custom tune, do not give us your setup, and then we're at fault for the "tune not working right." If you blow up the car by giving us the wrong information, then you alone blew it up.

Originally Posted by frs baby

well lack of research shows you moto east as ive been told sends bad start up tunes cameron on his day off spent at least 3 hrs fixing and data logging moto east mess and he did at no cost because he knew i messed up so if you need a tune go see cameron at lightspeed or visconni

You are one of very few unhappy customers. VERY few. As in less than 1/2 of 1%. Some might wait a bit and that's not the best thing in the world, but if your tuner isn't busy then your tuner probably isn't very good.

Originally Posted by frs baby

all the frs guys and even cameron said moto east is known for bad start up tunes when the software arrived thought it was good to go they didn't say we need to know mods on car till after supercharger was installed

Who is Cameron? Care to back this up? If we don't even know who he is then I'm not quite sure why he's the authority on the quality of our tunes.

Originally Posted by SkAsphalt

How are you running a belt driven supercharger without boost exactly?

And moto east is great, something clearly went wrong in the process - which is too bad too hear.

Good question as his new much improved tune isn't safe to drive on with boost. But we're at fault right?

Originally Posted by frs baby

because cameron from lightspeed played around with ecu and has fuel cutoff at 4500 rpm wich is same mark as boost

So if you had simply answered our emails with appropriate responses (as in, answer our actual questions) or given us the time of day to help you, you'd be riding around at full boost right now without a problem.

Phil covered most of it above, but please do not make libelous statements without backing up what you have to complain about. I'm proud to say that we have one of the best track records in the industry, and we've been so busy that we have barely had time to post on the forums these days. But that reputation is well earned. If you'd like to take some cheap shots then have it backed up because otherwise you're making absurdly false statements.

[SkAsphalt]

Originally Posted by moto-mike

We take our reputation seriously because that's what sets us apart from a lot of the other folks that don't know the 86 platform like we do. Fortunately one of our customers clued us in as to this thread (and the facebook posts).

Glad to see you and Phil chime in here. Your shop's reputation is well known throughout this forum, and in Saskatchewan. I do not think Jason even has his own laptop to run ECUtek, he may have bitten off more than he could chew here.

[JTOFJPN]

Cam from Lightspeed is a full-on retard. Listen to this quote from him:

"Your car isn't tuned for highway pulls and top speed runs, it's tuned for drag racing"
-97 Talon TSI

Don't worry, that car blew up twice after he rebuilt and tuned it.

I wouldn't trust him to tighten the wheel on a skateboard let alone tune my motor.

[SkAsphalt]

Blacked out my headlights finally! now I may want to smoke my side markers and turn signals... so I added to my mod list? dammit

Have a few parts to put on over the next 2 weeks while I have a full garage and tools to myself. Not nearly as cool as JPx haha Need to put in some orders for parts but also need to balance the books.


Life everyone, life. Thankfully I can do some side work for coin... but handjobs don't pay as well with the low cost of oil...

[JPxM0Dz]

Originally Posted by SkAsphalt

Blacked out my headlights finally! now I may want to smoke my side markers and turn signals... so I added to my mod list? dammit

Have a few parts to put on over the next 2 weeks while I have a full garage and tools to myself. Not nearly as cool as JPx haha Need to put in some orders for parts but also need to balance the books.


Live everyone, life. Thankfully I can do some side work for coin... but handjobs don't pay as well with the low cost of oil...

LOL Did you black out your headlamps. I`ll be taking mine to Custom Auto Shield as he came highly recommended

[SkAsphalt]

Originally Posted by JPxM0Dz

LOL Did you black out your headlamps. I`ll be taking mine to Custom Auto Shield as he came highly recommended

Yep, baked, sprayed, baked again. Back together and in my FRS now. I would have posted pictures but the car is so dusty from storage. I need to tend to that before photos

I thought the BRZ head lights come mostly blacked out anyway?

[JPxM0Dz]

Originally Posted by SkAsphalt

Yep, baked, sprayed, baked again. Back together and in my FRS now. I would have posted pictures but the car is so dusty from storage. I need to tend to that before photos

I thought the BRZ head lights come mostly blacked out anyway?

Oh I see. I will be just covering mine with a 3M tint, nothing too involved
They might appear somewhat dark from different angles, but I'll be smoking the headlights, drl and fogs

[SkAsphalt]

Originally Posted by JPxM0Dz

Oh I see. I will be just covering mine with a 3M tint, nothing too involved
They might appear somewhat dark from different angles, but I'll be smoking the headlights, drl and fogs

oh yes, will look very nice!! Let me know (via DM) what the prices are like if you go that route. Would not mind knowing.

[JPxM0Dz]

Took some time to decide on which canard I wanted and finally ended up with these

[frs baby]

say what you want to say about cam but im so grateful on a sun night like 9pm he basically fixed my tune for free he spent about 2 to 3hrs figuring what was wrong got the car started and again all for free so ill be seeing him soon and my car will be where it should be

[empower-auto]

Oh boy .. real tempted to chime in here but I think the story speaks for itself well enough

[JTOFJPN]

Originally Posted by frs baby

say what you want to say about cam but im so grateful on a sun night like 9pm he basically fixed my tune for free he spent about 2 to 3hrs figuring what was wrong got the car started and again all for free so ill be seeing him soon and my car will be where it should be

If you paid for a tune, and he fucked up, and then fixes it.... Isn't that just good business practice? Not some magical gift

[TB]

Also don't be scared to mix in some punctuation here and there.