Sway bar option list - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Mikepage · 10-22-2013, 01:05 PM

I think it's a good idea to start a list like this to help users to make their choices easily.

Stock OEM bar FR-S/BRZ/GT86
Solid
Front : 18mm
Rear : 14mm

% = the % Stiffer than Stock

ST suspensions
Front : 19mm,
2 position 41% & 76%

Rear : 17.5mm
3 position 20%, 58% and 133%

Witheline
Solid
Front : 20mm, 22mm
20mm Fixed or 2 position in option,
Soft Setting - 118.5%
Hard Setting - 174%
22mm 2 position
Soft Setting - 212%
Hard Setting - 288%

Rear : 16mm
3 position
Soft Setting - 40.48%
Medium Setting - 88.78%
Hard Setting - 176.58%
18mm
Soft Setting - 114.63%
Medium Setting - 178.04%
Hard Setting - 263.90%
http://www.whiteline.com.au/do_segue...ehicle=2012-ON

Cusco
Front : 16mm, 20mm
1 position
Hollow
16mm 79%
Solid
20mm 174%

Rear : 14mm, 16mm
Hollow
1 position
14mm 73%
16mm 168%
http://www.cuscousainc.com/vehicle-r...&modelname=475

TRD Stabilizer Set
TRD Site
Jparts Site

Eibach
Hollow
Front : 25mm
2 position
P1 = 88 N/mm (500 lbs/in) +255%
P2 = 103 N/mm (585 lbs/in) +314%

Rear : 19mm
2 position
P1 = 45 N/mm (255 lbs/in) +126%
P2 = 60 N/mm (338 lbs/in) +200%
http://performance-suspension.eibach...-roll-kit_2013

Hotchkis
Hollow
Front : 25.4mm
2 position
500 lbs/in 170%
630 lbs/in 245%

Rear : 19mm
4 position
320 lbs/in 200%
405 lbs/in 275%
520 lbs/in 385%
700 lbs/in 550%
http://www.hotchkis.net/scion-frs-sp...sway-bars.html

Perrin
Front : 19mm, 22mm
2 position
19mm Hole #1 25%
19mm Hole #2 72%
22mm Hole #1 130%
22mm Hole #2 218%
http://perrinperformance.com/i-13324...-fr-s-brz.html

Rear : 16mm, 19mm, 22mm, 25mm
3 position
16mm Hole #1 30%
16mm Hole #2 65%
16mm Hole #3 116%
19mm Hole #1 150%
19mm Hole #2 243%
19mm Hole #3 347%
22mm Hole #1 400%
22mm Hole #2 535%
22mm Hole #3 729%
http://perrinperformance.com/i-13324...-fr-s-brz.html

Tanabe
% Stiffer compared to Japan OEM.
Front : 22mm
1 position 205%

Rear : 18mm
1 position 235%
http://www.tanabe-usa.com/rnd/?tag=/fr-s

Strano FSB
Front : 22mm
1 position
85% Stiffer than 18mm OEM bar
http://www.stranoparts.com/partdetails.php?PartID=928

SuperPro
Front : 20mm, 22mm

Rear : 18mm, 20mm
http://www.fastwrx.com/suswbafbr.html

RaceComp
Hollow
Front : 25mm (22mm solid equivalent)
2 position
P1 = 60 N/mm (335 lbs/in)
P2 = 80 N/mm (455 lbs/in)

Rear : 19mm (16mm solid equivalent)
2 position
P1 = 33 N/mm (188 lbs/in)
P2 = 45 N/mm (257 lbs/in)
http://www.racecompengineering.com/i...sway-bars.html

Progress
Front : 20.5mm

Rear : 17.5mm
2 position
http://www.progressauto.com/products.../productID/759

ST
Solid?
Front : 19mm
1 position

Rear : 17mm
1 position

Unicorn · 10-22-2013, 01:10 PM

Dear Mikepage,

Sounds a bit sexist.

Yours faithfully,
Unicorn

Mikepage · 10-22-2013, 01:15 PM

Sorry, it's better now...am Canadian you know, my first language is french.

Then correct me when am wrong

Beyer Subaru · 10-22-2013, 01:24 PM

Quote:

Originally Posted by Mikepage

I think it's a good idea to start a list like this to help users to make her choices.

He's just messing around with you. You put her in place of their in your OP.

I think this is a good idea as well.

Being the OEM nutbag that I am:
TRD Stabilizer Set -
TRD Site http://trdparts.jp/conceptcar/86_per...uspension.html

Jparts
http://www.japanparts.com/db/parts_d...=23&submit.y=4

Ocean-Grown 86 · 10-22-2013, 02:29 PM

The rear sway bar from a 2008+ (correct me if i'm wrong) WRX will fit. I swiped one off of NASIOC for 35 shipped

mfbmike · 10-22-2013, 02:32 PM

Quote:

Originally Posted by Ocean-Grown 86

The rear sway bar from a 2008+ (correct me if i'm wrong) WRX will fit. I swiped one off of NASIOC for 35 shipped

Sure, it fits. But does it improve handling at all? How so, why?

Sway bars are one of those things I see people often install on their cars for no real rhyme or reason but do it just to do it and sometimes hurt their car's handling in many cases.

Ocean-Grown 86 · 10-22-2013, 03:36 PM

Quote:

Originally Posted by mfbmike

Sure, it fits. But does it improve handling at all? How so, why?

Sway bars are one of those things I see people often install on their cars for no real rhyme or reason but do it just to do it and sometimes hurt their car's handling in many cases.

That's why^. I was bored.

Mikepage · 10-23-2013, 11:19 AM

Quote:

Originally Posted by Ocean-Grown 86

That's why^. I was bored.

People change parts to change parts without ask any questions why.

The goal is to make changes to improve something you want.

Unicorn · 10-23-2013, 11:36 AM

Quote:

Originally Posted by Ocean-Grown 86

The rear sway bar from a 2008+ (correct me if i'm wrong) WRX will fit. I swiped one off of NASIOC for 35 shipped

Dearn Ocean-Grown 86,

You may find the below links somewhat relevant:

http://www.ft86club.com/forums/showthread.php?t=28221

http://www.ft86club.com/forums/showthread.php?t=37006

Yours sincerely,
Unicorn

Calum · 10-23-2013, 12:55 PM

@CSG Mike & @Racecomp Engineering do sway bar manufacturers always use the same material? In not, how much of a difference can that make to the stiffness of the bar?
@Mikepage could you add the stock bars to the list?

Kostamojen · 10-23-2013, 03:32 PM

Don't forget the Strano FSB

Mikepage · 10-25-2013, 11:47 AM

I will update tonight for sure.

Sent from my iPhone using Tapatalk - now Free

simpleisbest · 10-25-2013, 11:52 AM

Tanabe
22mm
Hollow
1 position

Mikepage · 10-29-2013, 01:26 PM

Quote:

Originally Posted by Kostamojen

Don't forget the Strano FSB

Do you have a link for this?

10-25-2013, 11:47 AM	#12
Mikepage Senior Member Join Date: Oct 2012 Drives: Scion FR-S 2013 Raven Location: Canada Posts: 690 Thanks: 380 Thanked 184 Times in 103 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	I will update tonight for sure. Sent from my iPhone using Tapatalk - now Free __________________ *o= FR-S =o*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New F/I option	SnapOv3st3r	Forced Induction	41	03-24-2013 09:44 PM
Leather Option.	l0aded	Scion FR-S / Toyota 86 GT86 General Forum	20	03-02-2013 08:59 PM
Diffuser Option on the BRZ	Markone	AUSTRALIA	25	01-14-2013 03:21 AM
Scion FR-S Option list	Crashoverride	Scion FR-S / Toyota 86 GT86 General Forum	38	04-18-2012 03:37 PM
Considering this as another option 2011 WRX	Draco233	Other Vehicles & General Automotive Discussions	5	04-01-2012 10:01 PM

10-22-2013, 01:05 PM	#1
Mikepage Senior Member Join Date: Oct 2012 Drives: Scion FR-S 2013 Raven Location: Canada Posts: 690 Thanks: 380 Thanked 184 Times in 103 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	Sway bar option list I think it's a good idea to start a list like this to help users to make their choices easily. Stock OEM bar FR-S/BRZ/GT86 Solid Front : 18mm Rear : 14mm % = the % Stiffer than Stock ST suspensions Front : 19mm, 2 position 41% & 76% Rear : 17.5mm 3 position 20%, 58% and 133% Witheline Solid Front : 20mm, 22mm 20mm Fixed or 2 position in option, Soft Setting - 118.5% Hard Setting - 174% 22mm 2 position Soft Setting - 212% Hard Setting - 288% Rear : 16mm 3 position Soft Setting - 40.48% Medium Setting - 88.78% Hard Setting - 176.58% 18mm Soft Setting - 114.63% Medium Setting - 178.04% Hard Setting - 263.90% http://www.whiteline.com.au/do_segue...ehicle=2012-ON Cusco Front : 16mm, 20mm 1 position Hollow 16mm 79% Solid 20mm 174% Rear : 14mm, 16mm Hollow 1 position 14mm 73% 16mm 168% http://www.cuscousainc.com/vehicle-r...&modelname=475 TRD Stabilizer Set TRD Site Jparts Site Eibach Hollow Front : 25mm 2 position P1 = 88 N/mm (500 lbs/in) +255% P2 = 103 N/mm (585 lbs/in) +314% Rear : 19mm 2 position P1 = 45 N/mm (255 lbs/in) +126% P2 = 60 N/mm (338 lbs/in) +200% http://performance-suspension.eibach...-roll-kit_2013 Hotchkis Hollow Front : 25.4mm 2 position 500 lbs/in 170% 630 lbs/in 245% Rear : 19mm 4 position 320 lbs/in 200% 405 lbs/in 275% 520 lbs/in 385% 700 lbs/in 550% http://www.hotchkis.net/scion-frs-sp...sway-bars.html Perrin Front : 19mm, 22mm 2 position 19mm Hole #1 25% 19mm Hole #2 72% 22mm Hole #1 130% 22mm Hole #2 218% http://perrinperformance.com/i-13324...-fr-s-brz.html Rear : 16mm, 19mm, 22mm, 25mm 3 position 16mm Hole #1 30% 16mm Hole #2 65% 16mm Hole #3 116% 19mm Hole #1 150% 19mm Hole #2 243% 19mm Hole #3 347% 22mm Hole #1 400% 22mm Hole #2 535% 22mm Hole #3 729% http://perrinperformance.com/i-13324...-fr-s-brz.html Tanabe % Stiffer compared to Japan OEM. Front : 22mm 1 position 205% Rear : 18mm 1 position 235% http://www.tanabe-usa.com/rnd/?tag=/fr-s Strano FSB Front : 22mm 1 position 85% Stiffer than 18mm OEM bar http://www.stranoparts.com/partdetails.php?PartID=928 SuperPro Front : 20mm, 22mm Rear : 18mm, 20mm http://www.fastwrx.com/suswbafbr.html RaceComp Hollow Front : 25mm (22mm solid equivalent) 2 position P1 = 60 N/mm (335 lbs/in) P2 = 80 N/mm (455 lbs/in) Rear : 19mm (16mm solid equivalent) 2 position P1 = 33 N/mm (188 lbs/in) P2 = 45 N/mm (257 lbs/in) http://www.racecompengineering.com/i...sway-bars.html Progress Front : 20.5mm Rear : 17.5mm 2 position http://www.progressauto.com/products.../productID/759 ST Solid? Front : 19mm 1 position Rear : 17mm 1 position __________________ *o= FR-S =o* Last edited by Mikepage; 04-23-2014 at 11:54 PM.

10-22-2013, 01:10 PM	#2
Unicorn Banned Join Date: Oct 2013 Drives: GT86 Location: Over The Rainbow Posts: 40 Thanks: 1 Thanked 27 Times in 16 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Dear Mikepage, Sounds a bit sexist. Yours faithfully, Unicorn

10-22-2013, 01:15 PM	#3
Mikepage Senior Member Join Date: Oct 2012 Drives: Scion FR-S 2013 Raven Location: Canada Posts: 690 Thanks: 380 Thanked 184 Times in 103 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	Sway bar option list Sorry, it's better now...am Canadian you know, my first language is french. Then correct me when am wrong __________________ *o= FR-S =o* Last edited by Mikepage; 10-25-2013 at 11:48 AM.

10-23-2013, 12:55 PM	#10
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,867 Times in 1,499 Posts Mentioned: 82 Post(s) Tagged: 1 Thread(s)	@CSG Mike & @Racecomp Engineering do sway bar manufacturers always use the same material? In not, how much of a difference can that make to the stiffness of the bar? @Mikepage could you add the stock bars to the list?

10-23-2013, 03:32 PM	#11
Kostamojen Senior Member Join Date: Oct 2011 Drives: 1993 Impreza w/ WRX Swap + FWD! Location: Roseville, CA Posts: 2,071 Thanks: 217 Thanked 951 Times in 500 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Don't forget the Strano FSB

10-25-2013, 11:52 AM	#13
simpleisbest Senior Citizen Join Date: May 2012 Drives: Scion FR-S Location: So. Cal Posts: 571 Thanks: 143 Thanked 186 Times in 121 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Tanabe 22mm Hollow 1 position

User Name		Remember Me?
Password