|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
03-27-2021, 02:28 AM | #1 |
Member
Join Date: Jul 2013
Drives:
Posts: 96
Thanks: 8
Thanked 7 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
secondary fuel injector contribution
please someone help me to understand the secondary fuel injector table on the ecuflash or ecutek or romraider
by 0.3 is this means 30% secondary and 70% primary thanks |
03-27-2021, 07:21 AM | #2 | |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Quote:
I think the tables your refering to are the port to direct injection ratio tables. There are three cold warm and hot. Its best to keep same values in all 3 tables The value in the table is the amount of port injection sometimes its a value between 0 and 1 and sometimes it might be a percent depending on which definitions your using. so if tavle has 0.3 or 30% it means at that load rpm point ecu will use 30% port and 70% direct injection Best nevercto put 1 or 100% in the tables as that means all port injection. This means no fuel through the direct injectprs which are in combustion chamber of engine. That would likely cause direct injectors seals to overheat and get damaged. You probably want not to go over say 0.7 to 0.8 or 70 to 80 % port injection so your always runnog a good amount of fuel through the direct injectprs |
|
The Following 2 Users Say Thank You to steve99 For This Useful Post: | pro_turbo (03-27-2021), Ultramaroon (03-27-2021) |
03-27-2021, 09:20 AM | #3 | |
Member
Join Date: Jul 2013
Drives:
Posts: 96
Thanks: 8
Thanked 7 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Yeah it confirmed.. i just tried today on street It was very torque full I feel the pedal react to car move forward is better with pi table from the rom raider stage 1. I think all the same through all stage rite Even i have see the base ecutek map which is pretty the same . If not mistaken the value is 0.3 in low and 0.2 at the max The off in the middle of rpm And back on 5000 rpm up. Maybe you can share a stock ecutek table map And i think there is treshold of they switching. By temp or something else. I forgot. Well basically to translate from flash rom language to motec are really challenging. But i am not giving up as i can feel better and better in everything i do into the engine. |
|
The Following User Says Thank You to pro_turbo For This Useful Post: | Ultramaroon (03-27-2021) |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fuel injector voltage | toast | Engine, Exhaust, Transmission | 1 | 01-15-2019 11:56 AM |
Fuel injector Service? | HeadBanger | CANADA | 7 | 02-03-2016 10:52 PM |
Fuel injector install | xsnapshot | Engine, Exhaust, Transmission | 2 | 12-10-2015 12:17 AM |
Dented fuel injector? | pgranberg11 | Engine, Exhaust, Transmission | 7 | 07-14-2015 12:58 AM |
Fuel Injector Cleaner | Purdue FR-S | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 15 | 06-18-2013 06:54 AM |