my interior re-design

[SolemnWishes]

Originally Posted by toast

I sometimes wish I was totally lacking in the ability to recognize crap workmanship like in that video. That guy is probably perfectly happy with his horrendous looking mod

I did forget to mention that I could not get my eyes off those gaps. It gets worse if you look at what's behind the cover.

[brandonblt2]

Originally Posted by toast

Not if you use a cup with a handle. Or if you get a drink to go with a removable lid. I know Dunkin medium and large iced drinks don't fit worth a crap in the door and you always run the risk of pulling the top off and spilling stuff everywhere when you remove them.

I sometimes wish I was totally lacking in the ability to recognize crap workmanship like in that video. That guy is probably perfectly happy with his horrendous looking mod

That makes sense I dont really have drinks in my car and if I do they are just gatorades or water. And yea to give the the guy credit he did say he was going to clean it up but yea its pretty rough looking right now lol

[Jive Turkey]

thanks for that video. i know i can make it look better than that for sure, but i just need to know if the airbag is still there.

anyone know if he is a member?

[SolemnWishes]

Originally Posted by Jive Turkey

thanks for that video. i know i can make it look better than that for sure, but i just need to know if the airbag is still there.

anyone know if he is a member?

Jive Turkey,

You can look at part 1 and 2 of his trilogy and it might provide some insight.

I personally couldn't get through it because of his, shall we say, rough edges.

[Jive Turkey]

Originally Posted by SolemnWishes

Jive Turkey,

You can look at part 1 and 2 of his trilogy and it might provide some insight.

I personally couldn't get through it because of his, shall we say, rough edges.

i'll be frank, you've seen my interior so far, you really think i'll mount it crooked and leave edges like that?


he clearly did it somehow, and all i want know is if he did anything to the airbag, because if he didn't then my plan still stands and i will execute this to perfection! :burn rubber:

also its been brought up quite a few times, but there is no place for coffee in the car, i refuse to put it in the doors. when my GF and i both have coffee in the car when we go places the armrest is open and for her its inconvenient and for me too because my elbow has no where to go.

[SolemnWishes]

Jive Turkey,

I think I may have misrepresented myself. What I meant was you should watch his part 1 and part 2 videos because I think he might talk about the airbag in those videos. But I couldn't not watch his videos because I couldn't stand watching someone use such poor workmanship on an FR-S.

Your shit is clean. No doubts about that.

[Jive Turkey]

Originally Posted by SolemnWishes

Jive Turkey,

I think I may have misrepresented myself. What I meant was you should watch his part 1 and part 2 videos because I think he might talk about the airbag in those videos. But I couldn't not watch his videos because I couldn't stand watching someone use such poor workmanship on an FR-S.

Your shit is clean. No doubts about that.

can i just say that i love your very formal forum posts i don't take offense though, everyone is entitled to their own opinion. i know that what i'm doing won't be everyone's cup of tea.

and as an update, i got in contact with him and this is what he wrote to me:

Originally Posted by Youtubeshane

I did not have to touch the airbag the drive cup holder was the only one with issue the passenger one because it was short it had no issue.
I almost used two passenger cup holder because they so short I used foam sealant to expand inside the dashboard

so this means, the project is back on. now what i need is new trim. well by new i mean used, so if anyone finds any deals or wants to part out, PLEASE LINK IN THIS THREAD.

[Porcupint]

Originally Posted by Jive Turkey

so this means, the project is back on. now what i need is new trim. well by new i mean used, so if anyone finds any deals or wants to part out, PLEASE LINK IN THIS THREAD.

if/when I swap mine for black, you're welcome to the stock silver piece.

[MooseWRX]

If you don't have your replacement trim by the time I get back from my deployment you're more than welcome to have mine, it's the least I can do for one of my favorite BRZs.

[Jive Turkey]

Originally Posted by Porcupint

if/when I swap mine for black, you're welcome to the stock silver piece.

Originally Posted by MooseWRX

If you don't have your replacement trim by the time I get back from my deployment you're more than welcome to have mine, it's the least I can do for one of my favorite BRZs.

thank you for your services.

keep me posted guys i won't be doing it for a while anyways, not until after the new year.

i can get the new trim in a matter of days, but i'd rather just pick up a used set. cash in hand now.

and after its all said and done, anyone want my current molded piece? still haven't decided if i'll sell it.

[MooseWRX]

I won't be getting back until the end of Jan, but I might just have my brother in law swap them out with the black pieces next time he is over at my house. And you can have mine for the cost of shipping, I'm far too lazy to even pretend I would've put mine up for sale, haha.

[Jive Turkey]

Originally Posted by MooseWRX

I won't be getting back until the end of Jan, but I might just have my brother in law swap them out with the black pieces next time he is over at my house. And you can have mine for the cost of shipping, I'm far too lazy to even pretend I would've put mine up for sale, haha.

haha no worries man, i can paypal you any time. just keep me posted, i'm in no rush like i said. i have other more important things going on right now than to worry about the BRZ.

[Porcupint]

Originally Posted by Jive Turkey

and after its all said and done, anyone want my current molded piece? still haven't decided if i'll sell it.

hmmm...

[SolemnWishes]

Jive Turkey,

I'm glad we found some way to install those cup holders for you.

The FR-S's cup holder problem is serious. Having driven my sister's roughly-10-cup-holder 2011 Honda Fit, I realized there is no such thing as too many cup holders.