|
Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack Specific topics relating to wheels and tires. |
|
Thread Tools | Search this Thread |
03-13-2024, 10:44 PM | #1 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
18x9 18x10 6UL @ 949 Racing
Coming this Summer
We'll start taking pre-orders in April. Wheels shipping in July. There will be a fat discount for early orders. Details TBA These are all new wheels, designed and engineered in our California office, made in Taiwan. Tilt cast (not gravity or low pressure) Flow formed 40% higher load rating than VIA standard for the 86 mid 19 lb range for the 18x9, mid 20 lb range for the 18x10 Knurled bead Anvil rear flange design for greater bend resistance Clearance for Wilwood Superlite 328mm BBK on 18x9. More on 18x10 We ran 18x10 +40with 265/35's on our record setting time trial build "Blub" with 15mm spacers in front, 5mm in rear and it was perfect. No fender roll, no rubbing. So this set up will allow you to rotate tires with just a 10mm spacer on front. For fans of our previous generation 17x8 and 17x9, yes we have 17's coming towards the end of the year. For GR86 owners, our similar Coto design will be offered in the right offsets for the platform. Same basic spoke pattern as the 6UL but without the lip. 18x9 +35 for the 1st gen 18x10 +35 for the 1st gen GR86 requires just enough more offset to need a different set of tooling so those wheel will be the Coto design later this year. Questions? Nickel Beskar Bronze
__________________
Last edited by 949 Racing; 03-18-2024 at 08:29 PM. |
The Following User Says Thank You to 949 Racing For This Useful Post: | RedReplicant (03-14-2024) |
03-15-2024, 06:15 PM | #2 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
Pic of Blub, our record setting TT build from a few years ago. These were 18x10 +40 with 15mm front and 5mm rear spacers. 265/35 Goodyear Supercars 3R and our race alignment spec. This is why we're doing our 6UL in 18x10. It's the ultimate track set up.
__________________
|
The Following User Says Thank You to 949 Racing For This Useful Post: | RedReplicant (03-19-2024) |
03-15-2024, 10:44 PM | #3 |
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,040 Times in 1,473 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
estimate price? I just bought 18x8.5 hypergrams
Sent from my Pixel 6 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
03-16-2024, 01:12 AM | #4 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
TBD. Rough prices on the site although they could change. Pre orders will get a huge discount when we launch in a month or so.
__________________
|
03-16-2024, 05:35 PM | #5 |
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,040 Times in 1,473 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
Can you PM me the discount. I am getting upset with the vendor who I ordered my Hypergrams from. If they don't ship I might just go for your 18x9
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
03-16-2024, 07:56 PM | #6 | |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Keep in mind, these are not for sale quite yet. Just letting folks know they will be in the next month or so, since it's a new size for us and new design.
__________________
|
|
The Following User Says Thank You to 949 Racing For This Useful Post: | jflogerzi (03-16-2024) |
03-19-2024, 07:38 PM | #7 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
Few more CAD renders, different angle of the Nickel finish.
__________________
|
The Following User Says Thank You to 949 Racing For This Useful Post: | RedReplicant (03-26-2024) |
03-25-2024, 05:00 PM | #8 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
Spice
__________________
Last edited by 949 Racing; 04-22-2024 at 05:17 PM. |
The Following User Says Thank You to 949 Racing For This Useful Post: | RedReplicant (03-26-2024) |
04-22-2024, 05:23 PM | #9 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
After a few discussions here about the nature of perception of what "bronze" is on a wheel, we decided to give this finish a new name. Spice.
Here is production finishes on our 17x9 wheel for the ND MX5. The FT86 6UL wheel will be a bit more concave. The GR86 needs a bit higher offset so it will be our Coto design coming late this year. Top and bottom pic is direct sunlight. Notice how the light catches the metallic flakes in Spice so it pops. Middle pic is in shade so its a softer and more muted tone. We dig it.
__________________
|
05-17-2024, 09:19 AM | #10 |
Member
Join Date: Oct 2017
Drives: 2014 BRZ Limited
Location: Central, PA
Posts: 34
Thanks: 3
Thanked 9 Times in 8 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Is the 17x9 dead? (in 5x100)
Last edited by tuna; 05-17-2024 at 10:07 AM. |
05-17-2024, 11:33 PM | #11 |
Off to the track!
Join Date: Mar 2020
Drives: '14 Lava 86, '13 WRB BRZ
Location: Canada
Posts: 715
Thanks: 1,651
Thanked 1,191 Times in 478 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
New color is quite nice. Also following for 17x9.
|
08-09-2024, 09:03 PM | #12 |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
18's will come first as that's the more popular size across all platforms. 17's will follow later. The 86 community hasn't gotten fully onboard with 18's being faster, which they are. 17" tires cost a bit less that 18's, which is a factor for some folks. We're making some forged prototypes to show. The tilt cast-flow formed 18x9, 18x10 production wheels should be shipping Q1 of 2025
__________________
|
The Following User Says Thank You to 949 Racing For This Useful Post: | RedReplicant (08-22-2024) |
08-12-2024, 08:57 AM | #13 | |
Senior Member
Join Date: May 2020
Drives: 2017 BRZ series.yellow
Location: Idaho
Posts: 237
Thanks: 123
Thanked 181 Times in 101 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
If 18's were always faster then that's what people would be running when they win SCCA Solo nationals. But they don't. For the most part in autocross with Twins, you don't run 18's unless you have to because you need extra tire width that isn't available in 17" sizes. |
|
08-12-2024, 08:14 PM | #14 | |
FT86Club Official Vendor
Join Date: Jan 2012
Drives: Miata, GT350, FR-S
Location: California, USA
Posts: 420
Thanks: 28
Thanked 917 Times in 298 Posts
Mentioned: 10 Post(s)
Tagged: 1 Thread(s)
|
Quote:
__________________
|
|
|
|
Tags |
6ul, 949 racing, blub, tilt cast |
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: CCW LM5T-18x9.5 +45, 18x10 +45 | nemes | Wheels and Tires | 1 | 06-20-2018 11:38 PM |
FS:2 black chrome te37 18x10.5+22,bronze work xd9 18x9+20,pansport 18x10.5+19 5x114 | jay92 | Wheels and Tires | 4 | 10-08-2016 06:13 AM |
FS SSR MS3 18x9.5 18x10 SOCAL | bryansubie | Wheels and Tires | 8 | 06-14-2016 09:17 PM |
Work XD9 18x9 +38 / 18x10 +38 | Garage 86 | Australia Classifieds | 4 | 01-05-2015 11:26 AM |
WORK M.C.O Racing 18x8.5 / 18x9.5 / 18x10.0 -- 5x100 Available Now | RavSpec | Wheels and Tires | 1 | 10-06-2014 02:44 PM |