BRZ Ts parts

[Khazzy]

Originally Posted by mister.bond

Hm, ok, 1.3 insted of 1.1

If there is really a difference to the radiator Caps in holding more pressure

then..... it would be interesting how much difference the Caps have

in their weight !

It would be nice if someone can do that and give us the

weight from the original Radiator Cap and the STI Radiator Cap.

Let´s see if the STI Cap is " Stronger" Build and is minimal heavier

from material cause of the "higher" 1.3 pressure-proof

I will do a weight comparison when I receive it and I return next month.

[Createddeleted]

Originally Posted by Khazzy

I will do a weight comparison when I receive it and I return next month.

If you don't get to I will.

But really. It's the nearly the same cap, from the same manufacturer; it just has a different sticker and a stronger spring.

[krayzie]

It's probably the same build but one is tested to make 1.3 bar while the other could only sustain 1.1 bar.

It's probably like G-Shocks where they all do 200m water resistance supposedly, but only the Frogman has every unit tested to ISO standard of 200m before they roll off the assembly line. Another watch example is the different grades ETA has for a single movement model, same build but different quality of components and finish / assembly that can affect the accuracy when tested (i.e. chronometer > top > elabore > standard).

[Trap63]

here part code.....





Inviato dal mio iPhone utilizzando Tapatalk

[Khazzy]

I asked Yuki if they can carry the steering wheel trim from the tS but that seems like a dead end to me. Maybe a frequent contact with Yuki can get him to push for the part to be added.

[BRZtoni]

test fitting my STI side skirts.
will be getting the set painted once rear spats arrive

[Turbo95eg6]

lol poor dog

[BRZtoni]

Originally Posted by Turbo95eg6

lol poor dog

when I make my car journal, you will get to know him more.


he has an eye infection so I need to put on the cone so he could stop
scratching it more.

[Beyer Subaru]

Whaddya talkin about @Turbo95eg6 ? That dog now has the best hearing on the block.

[psyclone07]

Anyone actually receive a STI/TS kit from the dealer with the US part numbers?

[BRZtoni]

Originally Posted by psyclone07

Anyone actually receive a STI/TS kit from the dealer with the US part numbers?

I checked with my buddy who works at Subaru.. and none.. I ordered my
set via nigeljdmparts

[mister.bond]

New Part arrived at Japanparts




look here :

http://www.japanparts.com/db/parts_d...&SEARCH_page=2




i wonder if it is only for Front ;
Does anybody can tell me if it is possible to also take one Set for REAR ?????

[The359]

You have to order the fronts and rears separate.

http://www.japanparts.com/db/partsli...KEY=484-036-02

[Kostamojen]

Struts AND springs for $1800? Thats actually not that bad.