2013 BRZ TPMS Ateq Quickset problem - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

wheelhaus · 01-20-2018, 05:32 PM

Works for everyone else. Doesn't work for me. I have a 2013 BRZ. I am using aftermarket sensors, Oro-Tek OTI-001B. The Quickset has never been able to set them, but the local tire shop has (Les Schwab), albeit after some difficulty. The tech claimed he had to set it as a Toyota and it worked. Cold night caused the TMPS light to turn on as expected, inflating further turned it off, as expected- so I know he was able to program it correctly with these sensors.

Using the Quickset, its LED light blinks successfully, however the TPMS light on the dash just blinks then stays solid, from what I understand this indicates an error. I have tried setting it as a Subaru BRZ, Scion FR-S, 2013, 2014, etc.

All software has been updated and I'm ready to throw this thing in the trash. Granted, I am using aftermarket sensors, but they DID work. Do I NEED OEM sensors to work with the Quickset?

I'd prefer to have this function properly than just tape over the light, but I might go that route in the end if this can't get resolved.

wheelhaus · 01-22-2018, 07:20 PM

Bump. Any ideas?

01-20-2018, 05:32 PM	#1
wheelhaus Join Date: Jul 2012 Drives: 2013 BRZ, 2020 KTM Super Duke 1290R Location: Denver Posts: 1,788 Thanks: 714 Thanked 1,141 Times in 624 Posts Mentioned: 49 Post(s) Tagged: 1 Thread(s)	2013 BRZ TPMS Ateq Quickset problem Works for everyone else. Doesn't work for me. I have a 2013 BRZ. I am using aftermarket sensors, Oro-Tek OTI-001B. The Quickset has never been able to set them, but the local tire shop has (Les Schwab), albeit after some difficulty. The tech claimed he had to set it as a Toyota and it worked. Cold night caused the TMPS light to turn on as expected, inflating further turned it off, as expected- so I know he was able to program it correctly with these sensors. Using the Quickset, its LED light blinks successfully, however the TPMS light on the dash just blinks then stays solid, from what I understand this indicates an error. I have tried setting it as a Subaru BRZ, Scion FR-S, 2013, 2014, etc. All software has been updated and I'm ready to throw this thing in the trash. Granted, I am using aftermarket sensors, but they DID work. Do I NEED OEM sensors to work with the Quickset? I'd prefer to have this function properly than just tape over the light, but I might go that route in the end if this can't get resolved.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATEQ TPMS Quickset	rm125chris	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	5	02-14-2018 02:43 PM
ATEQ TPMS Quickset Programmer	Dan37BRZ	Wheels and Tires	5	06-05-2017 09:38 PM
ATEQ QuickSet TPMS tool	B-R-Z	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	04-25-2014 08:17 PM
Has anyone tried ATEQ TPMS Quickset for our cars?	pheoxs	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	11-29-2013 03:26 PM
Anyone use an ATEQ TPMS Quickset?	Foobar	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	14	04-06-2013 12:59 AM

01-22-2018, 07:20 PM	#2
wheelhaus Join Date: Jul 2012 Drives: 2013 BRZ, 2020 KTM Super Duke 1290R Location: Denver Posts: 1,788 Thanks: 714 Thanked 1,141 Times in 624 Posts Mentioned: 49 Post(s) Tagged: 1 Thread(s)	Bump. Any ideas?

User Name		Remember Me?
Password